SEBSON 2_X_BWM_ALARM_B

SEBSON Motion Sensor with Alarm and Chime

Model: 2_X_BWM_ALARM_B

அறிவுறுத்தல் கையேடு

1. அறிமுகம்

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Motion Sensor with Alarm and Chime. Please read this manual thoroughly before using the device to ensure proper function and safety.

The SEBSON Motion Sensor is designed to detect movement of people, large animals, and vehicles within its detection field. It can function as either an alarm or a chime, making it suitable for various applications such as entry alerts or security notifications.

2. பாதுகாப்பு வழிமுறைகள்

  • Ensure the device is installed in a dry, indoor environment. Avoid exposure to moisture or extreme temperatures.
  • Use only 9V alkaline batteries. Do not mix old and new batteries, or different types of batteries.
  • பயன்படுத்தப்பட்ட பேட்டரிகளை உள்ளூர் விதிமுறைகளின்படி அப்புறப்படுத்துங்கள்.
  • Do not attempt to open or modify the device. This may void the warranty and pose a safety risk.
  • சாதனத்தை குழந்தைகளுக்கு எட்டாதவாறு வைத்திருங்கள்.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

  • 2 x SEBSON Motion Sensor units
  • 4 x மவுண்டிங் திருகுகள்
  • 4 x Wall Plugs (Ø6mm)

Note: 9V batteries are not included and must be purchased separately.

4. தயாரிப்பு முடிந்துவிட்டதுview

The SEBSON Motion Sensor consists of the main sensor unit and a rotatable mounting bracket. Key components include the motion detection lens, the speaker grille, and the mode selection switch.

Two SEBSON Motion Sensors with Alarm and Chime

Image: Two SEBSON Motion Sensor units, showing their compact design and white casing.

Close-up of the SEBSON Motion Sensor showing the mode switch

படம்: விரிவானது view of the motion sensor, highlighting the mode switch with 'CHIME', 'OFF', and 'ALARM' settings.

5 அமைவு

5.1 பேட்டரி நிறுவல்

  1. Gently slide open the battery compartment cover located on the back of the sensor unit.
  2. Insert two 9V alkaline batteries, ensuring correct polarity (+/-).
  3. பேட்டரி பெட்டியின் அட்டையை பாதுகாப்பாக மூடு.
Diagram showing battery installation and mounting bracket assembly

Image: Exploded diagram illustrating how to open the battery compartment and insert batteries, along with the separate mounting bracket.

5.2 சென்சார் பொருத்துதல்

  1. Choose a suitable location for the sensor. The detection range is 8 meters with a 60° angle. Consider areas where movement needs to be monitored.
  2. Mark the positions for the mounting screws on the wall using the mounting bracket as a template.
  3. Drill two holes (Ø6mm) at the marked positions.
  4. வழங்கப்பட்ட சுவர் செருகிகளை துளையிடப்பட்ட துளைகளில் செருகவும்.
  5. வழங்கப்பட்ட திருகுகளைப் பயன்படுத்தி மவுண்டிங் பிராக்கெட்டை சுவரில் பாதுகாக்கவும்.
  6. Slide the motion sensor unit onto the mounted bracket. The sensor housing can be rotated 360° within the bracket to adjust the detection area.
Diagram illustrating the 8-meter detection range and 60-degree angle of the motion sensor, with 360-degree rotation capability

Image: Technical diagram showing the sensor's 8-meter detection range, 60-degree detection angle, and the 360-degree rotation feature of the sensor unit within its bracket.

6. இயக்க வழிமுறைகள்

The SEBSON Motion Sensor features a three-position switch to select its operating mode:

  • CHIME Mode: When movement is detected, the sensor will emit a short, pleasant chime sound. This mode is ideal for entry alerts in shops or offices.
  • ஆஃப் பயன்முறை: The sensor is powered off and will not detect movement or emit any sound.
  • அலாரம் பயன்முறை: When movement is detected, the sensor will emit a loud alarm sound. This mode is suitable for security purposes.

To select a mode, slide the switch on the side of the sensor to the desired position (CHIME, OFF, or ALARM).

Close-up of the SEBSON Motion Sensor showing the mode switch with CHIME, OFF, and ALARM settings

படம்: விரிவானது view of the sensor's side, clearly showing the three-position switch for selecting between Chime, Off, and Alarm modes.

7. பராமரிப்பு

  • சுத்தம்: Wipe the sensor's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • பேட்டரி மாற்று: If the sound becomes weak or the sensor stops responding, replace the 9V batteries. Follow the battery installation steps in Section 5.1.
  • லென்ஸ் பராமரிப்பு: Keep the motion detection lens clean and free from obstructions to ensure optimal performance.

8. சரிசெய்தல்

பிரச்சனைசாத்தியமான காரணம்தீர்வு
சென்சார் இயக்கத்தைக் கண்டறியவில்லை.
  • பேட்டரிகள் தீர்ந்து போயுள்ளன அல்லது தவறாகச் செருகப்பட்டுள்ளன.
  • Sensor is in OFF mode.
  • Detection lens is obstructed or dirty.
  • Object is outside detection range/angle.
  • பேட்டரிகளை மாற்றவும் அல்லது துருவமுனைப்பை சரிபார்க்கவும்.
  • Slide switch to CHIME or ALARM mode.
  • Clean the detection lens.
  • Adjust sensor position or angle.
Sound is too low or distorted.
  • பேட்டரிகள் குறைவாக உள்ளன.
  • Speaker grille is obstructed.
  • பேட்டரிகளை மாற்றவும்.
  • Ensure speaker grille is clear.
தவறான எச்சரிக்கைகள்.
  • Sensor is detecting unwanted movement (e.g., pets, moving curtains).
  • Direct sunlight or heat sources interfering with detection.
  • Adjust sensor angle or relocate to avoid unwanted detection.
  • Reposition sensor away from direct sunlight or heat sources.

9. விவரக்குறிப்புகள்

அம்சம்விவரம்
பிராண்ட்செப்சன்
மாதிரி எண்2_X_BWM_ALARM_B
சக்தி ஆதாரம்Battery Powered (2x 9V batteries, not included)
பேட்டரி வகை பரிந்துரைக்கப்படுகிறதுஅல்கலைன்
கண்டறிதல் வரம்பு8 மீட்டர் வரை
கண்டறிதல் கோணம்60 டிகிரி
சுழற்சி திறன்360 degrees (within bracket)
மவுண்டிங் வகைசுவர் மவுண்ட்
நிறம்வெள்ளை
பரிமாணங்கள் (தொகுப்பு)12 x 9 x 8 செ.மீ
எடை (உருப்படி)280 கிராம்

10. உத்தரவாதம் மற்றும் ஆதரவு

SEBSON products are designed and manufactured to high-quality standards. This product comes with a standard manufacturer's warranty. For specific warranty details, technical support, or assistance with your device, please contact SEBSON customer service through their official webதயாரிப்பு வாங்கிய தளம் அல்லது சில்லறை விற்பனையாளர்.

உத்திரவாதக் கோரிக்கைகளுக்காக உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்துக் கொள்ளவும்.

தொடர்புடைய ஆவணங்கள் - 2_X_BWM_ALARM_B

முன்view SEBSON IR_ESO_F அகச்சிவப்பு மோஷன் டிடெக்டர் நிறுவல் மற்றும் பயனர் கையேடு
SEBSON IR_ESO_F அகச்சிவப்பு இயக்கக் கண்டறிதலுக்கான விரிவான வழிகாட்டி, நிறுவல், செயல்பாடு, பாதுகாப்பு மற்றும் தொழில்நுட்ப விவரக்குறிப்புகளை உள்ளடக்கியது. லைட்டிங் கட்டுப்பாட்டிற்கு இந்த இயக்கக் கண்டறிதலை எவ்வாறு திறம்பட பயன்படுத்துவது என்பதை அறிக.
முன்view SEBSON IR மோஷன் டிடெக்டர் (IR_ES_G / IR_ES_GA) நிறுவல் மற்றும் பயனர் கையேடு
பாதுகாப்பு வழிமுறைகள், தொழில்நுட்ப விவரக்குறிப்புகள், கண்டறிதல் வரம்பு மற்றும் WEEE அகற்றல் தகவல் உள்ளிட்ட SEBSON IR மோஷன் டிடெக்டரை (IR_ES_G / IR_ES_GA) நிறுவுவதற்கும் பயன்படுத்துவதற்கும் விரிவான வழிகாட்டி.
முன்view SEBSON IR Motion Detector IR_WAL_E: User Manual and Installation Guide
Comprehensive user manual and installation guide for the SEBSON IR_WAL_E infrared motion detector. Learn about its features, safety precautions, installation steps, technical specifications, and proper disposal.
முன்view SEBSON IR WAL C Motion Detector: Installation Guide, Features, and Technical Specifications
Comprehensive guide for the SEBSON IR WAL C infrared motion detector. Learn about its intended use, safety precautions, installation steps, operational features, technical data, and disposal information.
முன்view SEBSON IR Motion Detector (IR_OUT_E, IR_OUT_EA) - Installation and User Manual
Comprehensive guide for the SEBSON IR Motion Detector models IR_OUT_E and IR_OUT_EA, covering installation, safety, features, technical specifications, and maintenance. Learn how to install and operate your motion detector for optimal performance.
முன்view SEBSON HD GS412 Hitzemelder – Bedienungsanleitung und Installationshinweise
Umfassende Bedienungsanleitung für den SEBSON HD GS412 Hitzemelder. Erfahren Sie mehr über Installation, Funktion, Vernetzung und Sicherheitshinweise für Ihren Hitzemelder.