Aqua Control C4099O Garden Irrigation Programmer

1. அறிமுகம்

The Aqua Control C4099O is an automatic irrigation programmer designed for efficient garden watering. This device allows you to automate your watering schedule with precise control over frequency and duration, ensuring your plants receive optimal hydration. Its robust design and user-friendly interface make it suitable for various garden setups, including those with low water pressure.

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Aqua Control C4099O irrigation programmer.

2 முக்கிய அம்சங்கள்

• தானியங்கி நிரலாக்கம்: Automates irrigation with desired frequency and duration settings.
• Adjustable Frequency: Options include every 1, 2, 3, 4, 5, 6, 8, 12, 24, 48, 72 hours, or once per week.
• Adjustable Duration: Watering times can be set for 1, 2, 3, 5, 10, 15, 20, 30, 60, 90, or 120 minutes.
• கைமுறை கட்டுப்பாடு: Features a manual open and close option for immediate watering or stopping.
• தாமத செயல்பாடு: Allows delaying the start of irrigation from 1 to 12 hours from the time of setting.
• Low Pressure Operation: Designed to open at 0 bar, making it suitable for use with water tanks, though a minimum operating pressure of 1 bar and maximum of 8 bar is recommended for proper function.
• பேட்டரி மூலம் இயங்கும்: Operates on 2 x 1.5V AAA alkaline batteries (not included), housed in a waterproof compartment.

படம் 2.1: மேல்view of the Aqua Control C4099O's features, including its pressure requirements, frequency and duration settings, battery type, and 3/4-inch faucet connection.

Figure 2.2: Important recommendations for optimal use, such as using a pressure reducer and filter, using only cold water, and avoiding rechargeable batteries.

3 அமைவு

1. பேட்டரிகளை நிறுவவும்:

   Open the battery compartment located on the front side of the programmer. Insert 2 x 1.5V AAA alkaline batteries (not included), ensuring correct polarity. Close the compartment securely to maintain its waterproof seal.

   

   Figure 3.1: Inserting AAA batteries into the waterproof compartment.

2. குழாயுடன் இணைக்கவும்:

   Manually connect the programmer's inlet to a 3/4-inch garden faucet. Screw it on firmly by hand until it is secure. Do not use tools or Teflon tape, as the unit is designed for a tight seal without them.

   

   Figure 3.2: The irrigation programmer securely attached to a garden faucet.

3. திறந்த நீர் வழங்கல்:

   Ensure the water faucet is fully open. The programmer will control the water flow based on your settings.

4. இயக்க வழிமுறைகள்

The Aqua Control C4099O features two main dials for setting frequency and duration, along with a delay button for advanced scheduling.

4.1. Setting Automatic Irrigation

1. அதிர்வெண் அமைக்கவும்: Rotate the left dial (labeled "FRECUENCIA" / "Frequency") to select how often you want the irrigation to occur. Options range from every 1 hour to once per week.
2. கால அளவை அமைக்கவும்: Rotate the right dial (labeled "DURACIÓN" / "Duration") to select the desired watering time. Options range from 1 minute to 120 minutes.
3. செயல்படுத்து: Once both dials are set, the programmer will begin its cycle based on the current time and your chosen settings.

Figure 4.1: Setting the frequency and duration using the two ergonomic dials on the front of the programmer.

4.2. கையேடு செயல்பாடு

To manually open or close the water flow:

• Rotate the "Duration" dial to the "ON" position to open the valve and start watering immediately.
• Rotate the "Duration" dial to the "OFF" position to close the valve and stop watering.
• Remember that manual operation will override any active program. To resume automatic programming, you may need to re-set the dials or adjust the delay function.

4.3. தாமத செயல்பாடு

The delay function allows you to postpone the start of the programmed irrigation cycle by a specific number of hours (1 to 12 hours).

1. Set your desired Frequency and Duration using the respective dials.
2. Press and hold the "DELAY" button for 2 seconds until the LED indicator lights up.
3. Press the "DELAY" button repeatedly to increase the delay time by one hour with each press. The LED will flash to indicate the selected delay.
4. After selecting the desired delay, wait 3 seconds for the setting to be confirmed, and the LED will turn off. The irrigation will start after the set delay period.

Figure 4.2: Utilizing the delay function to postpone the start of watering, useful for specific timing needs.

5. பராமரிப்பு

• பேட்டரி மாற்று: Replace batteries when the battery indicator light signals low power or when the unit stops functioning. Always use new 1.5V AAA alkaline batteries. Do not use rechargeable batteries.
• சுத்தம்: Periodically check the inlet filter for debris and clean it if necessary to ensure proper water flow. Use a soft cloth to wipe the exterior of the programmer. Do not use abrasive cleaners.
• குளிர்கால சேமிப்பு: Before the first frost, disconnect the programmer from the faucet. Drain any remaining water from the unit and store it in a dry, frost-free location indoors. This prevents damage from freezing water.
• Summer Protection: While designed for outdoor use, prolonged direct exposure to intense sunlight can affect the unit's lifespan. Consider providing some shade if possible.

6. சரிசெய்தல்

7. விவரக்குறிப்புகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

The Aqua Control C4099O irrigation programmer is covered by the manufacturer's standard warranty. Please refer to the product packaging or the official Aqua Control webகுறிப்பிட்ட உத்தரவாத விதிமுறைகள் மற்றும் நிபந்தனைகளுக்கான தளம்.

For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Aqua Control customer service. Contact information can typically be found on the product packaging or the manufacturer's official webதளம்.

குறிப்பு: உத்தரவாத நோக்கங்களுக்காக வாங்கியதற்கான சான்றாக உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.