WAVLINK AC1200 Outdoor WiFi Extender WN572HG3 Instruction Manual

1. அறிமுகம்

This manual provides detailed instructions for the installation, configuration, and operation of your WAVLINK AC1200 Outdoor WiFi Extender (Model WN572HG3). This device is designed to extend your wireless network coverage outdoors, offering reliable and high-speed internet access in various environments. Please read this manual thoroughly before using the product to ensure proper setup and optimal performance.

2. தயாரிப்பு முடிந்துவிட்டதுview

The WAVLINK AC1200 Outdoor WiFi Extender is a versatile networking device that can function as an Access Point (AP), Router, or Wireless Repeater. It features dual-band Wi-Fi (2.4GHz and 5GHz) for combined speeds up to 1200Mbps and is equipped with four high-gain omni-directional antennas for extended range.

படம் 2.1: முன் view of the WAVLINK AC1200 Outdoor WiFi Extender, showing its main body and four detachable antennas.

3 முக்கிய அம்சங்கள்

• AC1200 Dual-Band Wi-Fi: Supports 802.11ac standard with simultaneous 2.4GHz (300Mbps) and 5GHz (867Mbps) connections for a total of 1200Mbps.
• அதிக ஆதாய ஆண்டெனாக்கள்: Equipped with four 7dBi detachable omni-directional antennas to enhance signal reception and transmission.
• பவர் ஓவர் ஈதர்நெட் (PoE): Supports Passive PoE for flexible deployment up to 60 meters, allowing power and data transmission over a single Ethernet cable.
• வலுவான வெளிப்புற வடிவமைப்பு: Features an IP65-rated weatherproof and heat-resistant casing, providing protection against harsh outdoor conditions, including 15KV ESD and 4KV lightning protection.
• உயர் சக்தி Ampஆயுட்காலம்: உள்ளமைக்கப்பட்ட PA+LNA amplifiers (1000mW) improve signal strength and coverage, extending the transmission distance up to 200 meters in open air.

Figure 3.1: Illustration of the dual-band capabilities, highlighting 5GHz at 867Mbps and 2.4GHz at 300Mbps.

Figure 3.2: The device installed in an outdoor setting, demonstrating its IP65 weatherproof rating and protection against heat, rain, lightning, and snow.

Figure 3.3: Visual representation of the high power amplifiers (PA+LNA) within the device, contributing to a stronger signal and wider coverage up to 200 meters.

4. அமைவு மற்றும் நிறுவல்

The WAVLINK WN572HG3 is designed for flexible outdoor installation. Ensure the device is mounted in a location that provides optimal signal coverage and is protected from direct physical impact.

4.1 இயற்பியல் நிறுவல்

1. ஆண்டெனாக்களை இணைக்கவும்: Carefully screw the four detachable antennas onto the corresponding connectors on the device.
2. மவுண்டிங்: Use the provided mounting kit to secure the device to a pole or wall. Ensure it is positioned vertically for best performance.
3. ஈதர்நெட் கேபிளை இணைக்கவும்: Connect an Ethernet cable from your network (router/modem) to the LAN/PoE port on the device.
4. மின் இணைப்பு: Connect the other end of the Ethernet cable to the PoE injector's 'PoE' port. Then, connect an Ethernet cable from your computer or network switch to the 'LAN' port of the PoE injector. Finally, plug the power adapter into the PoE injector and a power outlet.

Figure 4.1: Connection diagrams for various operating modes, including AP, Router, Repeater, and WISP, showing how the device integrates into different network setups.

4.2 ஆரம்ப கட்டமைப்பு

After physical installation, you will need to configure the device via a web browser. Refer to the quick start guide for initial access details (default IP address, username, and password).

5. இயக்க முறைகள்

The WAVLINK WN572HG3 supports multiple operating modes to suit different networking needs:

• அணுகல் புள்ளி (AP) பயன்முறை: Converts a wired network connection into a wireless one, allowing multiple devices to connect wirelessly.
• திசைவி பயன்முறை: Functions as a primary router, connecting to an internet source (e.g., modem) and distributing internet access to connected devices.
• ரிப்பீட்டர் பயன்முறை: Extends the coverage of an existing wireless network by receiving the signal and re-transmitting it.
• WISP பயன்முறை: Connects wirelessly to an ISP access point and shares the internet connection with local devices.

Detailed configuration steps for each mode are available in the device's web இடைமுகம்.

6. பராமரிப்பு

• வழக்கமான சுத்தம்: Periodically clean the exterior of the device to prevent dust and debris buildup, especially around ventilation areas. Use a soft, dry cloth.
• நிலைபொருள் புதுப்பிப்புகள்: WAVLINK அதிகாரப்பூர்வத்தைப் பார்க்கவும் webசமீபத்திய ஃபார்ம்வேர் புதுப்பிப்புகளுக்கான தளம். ஃபார்ம்வேரைப் புதுப்பித்த நிலையில் வைத்திருப்பது உகந்த செயல்திறன், பாதுகாப்பு மற்றும் புதிய அம்சங்களுக்கான அணுகலை உறுதி செய்கிறது.
• சுற்றுச்சூழல் சோதனைகள்: Ensure the mounting remains secure and the cables are free from damage, especially after severe weather conditions.

7. சரிசெய்தல்

• சக்தி இல்லை: Ensure the PoE injector is properly connected to a power source and the Ethernet cable is securely connected to the device's PoE port. Check the power LED on the device.
• இணைய அணுகல் இல்லை: Verify that your main internet source (modem/router) is working correctly. Check the WAN/LAN LED on the device. Ensure the device is configured in the correct operating mode.
• Weak Signal/Poor Performance: Adjust the device's position and antenna orientation. Ensure there are no major obstructions between the device and client devices. Consider reducing the distance between the device and the main router if in Repeater mode.
• அணுக முடியாது Web இடைமுகம்: Ensure your computer is connected to the device's network (either directly or via Wi-Fi). Verify the IP address used to access the interface is correct. Try resetting the device to factory defaults (refer to the quick start guide for reset instructions).

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information and technical support, please refer to the documentation included with your product or visit the official WAVLINK webஉத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.