1. அறிமுகம்
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. அமைவு மற்றும் நிறுவல்
உகந்த செயல்திறன் மற்றும் பாதுகாப்பிற்கு சரியான நிறுவல் மிக முக்கியமானது. இந்த வழிமுறைகளை கவனமாக பின்பற்றவும்.
2.1 பேக்கிங் மற்றும் ஆய்வு
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- பேக்கிங் ஸ்லிப்பில் பட்டியலிடப்பட்டுள்ள அனைத்து கூறுகளும் உள்ளனவா என்பதைச் சரிபார்க்கவும்.
2.2 சென்சார் பொருத்துதல்
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
படம் 2: பக்கம் view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 மின் இணைப்புகள்
எச்சரிக்கை: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| கம்பி நிறம் | செயல்பாடு |
|---|---|
| பழுப்பு | AC Line (L1) |
| நீலம் | AC Neutral (L2) |
| கருப்பு | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. ஆபரேஷன்
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 பவர் ஆன்
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Detection Principle
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 வரம்பு மற்றும் செயல்திறன்
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. பராமரிப்பு
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 சுத்தம் செய்தல்
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 Cable and Connection Inspection
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. சரிசெய்தல்
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Sensor not powering on | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| Sensor not detecting objects | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| Intermittent detection | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. விவரக்குறிப்புகள்
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- மாதிரி: S18AW3FF50 அறிமுகம்
- தொடர்: EZ-Beam S18 Series
- கண்டறிதல் வரம்பு: 50 மி.மீ
- உள்ளீடு தொகுதிtage: 20-250VAC
- வெளியீட்டு வகை: SPST Solid-State Light Operate
- கேபிள் நீளம்: 2M (6.5FT)
- சென்சார் வகை: Photoelectric, Fixed Field
- உற்பத்தியாளர்: BANNER ENGINEERING
- ASIN: B07RZTBRLS
- முதல் தேதி கிடைக்கும்: டிசம்பர் 3, 2021
7. உத்தரவாதம் மற்றும் ஆதரவு
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official webதளம்.
திரும்பும் கொள்கை: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
உற்பத்தியாளர்: BANNER ENGINEERING
மேலும் உதவிக்கு, பார்வையிடவும் BANNER ENGINEERING official webதளம்.
