1. அறிமுகம்
நன்றி, நன்றி.asing the American Audio WM-419 4-Channel UHF Handheld Wireless Microphone System. This system is designed to provide high-quality, reliable wireless audio for various applications, including PA systems, karaoke, mobile entertainment, schools, and houses of worship. This manual provides essential information for the proper setup, operation, and maintenance of your WM-419 system.
Please read this manual thoroughly before operating the unit to ensure optimal performance and to prevent damage.
2. தொகுப்பு உள்ளடக்கங்கள்
கீழே பட்டியலிடப்பட்டுள்ள அனைத்து கூறுகளும் உங்கள் தொகுப்பில் சேர்க்கப்பட்டுள்ளதா என்பதைச் சரிபார்க்கவும்:
- 1 x WM-419 Wireless Receiver Unit
- 4 x கையடக்க வயர்லெஸ் மைக்ரோஃபோன்கள்
- 4 x Microphone Clips
- 8 x AA பேட்டரிகள் (மைக்ரோஃபோன்களுக்கு)
- 1 x Power Adapter for Receiver
- 1 x 1/4" Audio Cable
- பயனர் கையேடு (இந்த ஆவணம்)

படம் 2.1: Included components of the WM-419 system. This image displays the receiver, four handheld microphones, four detachable antennas, eight AA batteries, a power adapter, and a 1/4" audio cable, along with four microphone clips.
3 முக்கிய அம்சங்கள்
- 4-Channel UHF Wireless Handheld Microphone System
- Intelligent Frequency Autoscan with IR Synchronization
- Individual Volume Control for each microphone channel on the receiver
- XLR Audio Output for each microphone channel
- 50 Channels Available per Receiver (200 total channels)
- 16-Bit Pilot Technology to assist with eliminating frequency interference
- Wireless Range: Up to 300 feet / 90 meters (line of sight)
- Microphone Battery Life: 6-10 hours (with included AA batteries)
- OLED Screen on Handheld MIC Transmitters
4. அமைவு வழிகாட்டி
4.1 Receiver Placement
Place the WM-419 receiver on a stable, flat surface, away from strong electromagnetic interference sources. Ensure there is adequate ventilation around the unit. For optimal signal reception, position the receiver's antennas vertically and ensure they are not obstructed.

படம் 4.1: முன் view of the WM-419 receiver with microphones. This image shows the receiver unit with its four antennas extended, and the four handheld microphones resting on top, illustrating the compact design.
4.2 பெறுநரை இணைத்தல்
- மின் இணைப்பு: Connect the included power adapter to the DC 12-15V input on the rear panel of the receiver. Plug the adapter into a suitable power outlet.
- ஆடியோ வெளியீடு: Connect the receiver to your PA system, mixer, or amplifier using the XLR audio outputs for individual microphone channels (Balanced A, B, C, D) or the AF MIX OUT (1/4" unbalanced) for a combined output.

படம் 4.2: Rear panel connections of the WM-419 receiver. This image highlights the DC power input, four balanced XLR outputs (A, B, C, D), and a mixed 1/4" audio output, along with the antenna connections.
4.3 Installing Batteries in Microphones
Each handheld microphone requires two AA batteries. Ensure correct polarity when inserting the batteries.
- Unscrew the bottom cap of the microphone to reveal the battery compartment.
- Insert two AA batteries, observing the polarity markings (+/-).
- கீழ் மூடியை மீண்டும் பாதுகாப்பாக திருகவும்.

படம் 4.3: Four handheld microphones. This image displays the four individual handheld microphones, each featuring an OLED display and power button, ready for battery installation and use.
5. இயக்க வழிமுறைகள்
5.1 பவர் ஆன்/ஆஃப்
- பெறுபவர்: Press the POWER button on the front panel of the receiver to turn it on or off.
- ஒலிவாங்கிகள்: Press and hold the power button on each handheld microphone for a few seconds to turn it on or off. The OLED screen will illuminate when powered on.
5.2 Frequency Synchronization (IR Sync)
The WM-419 features Intelligent Frequency Autoscan and IR Synchronization for easy setup.
- Turn on the receiver and the desired microphone.
- On the receiver, press the ஸ்கேன் button for the channel you wish to set. The receiver will automatically scan for an available clear frequency.
- Once a frequency is found, the display will show "SYNC". Position the IR window of the microphone (usually near the bottom of the display) close to the IR sensor on the receiver (located near the channel display).
- அழுத்தவும் அமைக்கவும் button on the receiver for that channel. The frequency information will be transmitted to the microphone via infrared. The microphone's display should show the same frequency as the receiver, indicating successful synchronization.
- Repeat this process for each microphone.

படம் 5.1: Receiver front panel detail. This image provides a close-up view of the receiver's illuminated OLED displays for each channel, showing frequency information, signal strength, and individual volume controls.

படம் 5.2: Microphone OLED display. A detailed view of one handheld microphone's OLED screen, showing the current frequency and battery indicator, along with the power/mute button.
5.3 ஒலியளவை சரிசெய்தல்
Each channel on the receiver has an independent volume control knob. Adjust these knobs to achieve the desired audio level for each microphone.
5.4 Muting Microphones
A short press of the power button on the handheld microphone will mute/unmute the microphone. The OLED display will indicate the mute status.
6. பராமரிப்பு
- சுத்தம்: Use a soft, dry cloth to clean the surfaces of the receiver and microphones. Do not use abrasive cleaners or solvents.
- பேட்டரி மாற்று: Replace microphone batteries when the low battery indicator appears on the microphone's OLED screen or when audio quality degrades. Always use fresh AA batteries.
- சேமிப்பு: When not in use for extended periods, remove batteries from the microphones to prevent leakage. Store the system in a cool, dry place.
7. சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| மைக்ரோஃபோனில் இருந்து ஒலி இல்லை | Microphone not powered on; Batteries dead; Microphone not synchronized; Receiver volume too low; Output cable disconnected. | Ensure microphone is on; Replace batteries; Perform IR sync; Increase receiver channel volume; Check audio cable connections to mixer/PA. |
| Interference/Static | Nearby electronic devices; Other wireless systems on same frequency; Obstructions between mic and receiver; Receiver too far from microphone. | Move receiver away from interference sources; Perform Autoscan and re-sync to a clear frequency; Ensure line of sight; Reduce distance between mic and receiver. |
| குறுகிய வயர்லெஸ் வரம்பு | Antennas not properly positioned; Obstructions; Low microphone battery. | Ensure antennas are vertical and unobstructed; Minimize physical barriers; Replace microphone batteries. |
| மைக்ரோஃபோன் காட்சி வேலை செய்யவில்லை. | Dead batteries; Microphone not powered on. | Replace batteries; Press and hold power button to turn on. |
8. விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| மாதிரி பெயர் | American Audio WM-419 |
| மைக்ரோஃபோன் படிவ காரணி | Microphone System (Handheld) |
| சேனல்களின் எண்ணிக்கை | 4 (50 channels available per receiver, 200 total) |
| இணைப்பு தொழில்நுட்பம் | UHF Wireless, XLR |
| சக்தி ஆதாரம் | Receiver: AC Adapter; Microphones: 2 x AA Batteries (per mic) |
| Battery Life (Microphones) | 6-10 மணி நேரம் |
| வயர்லெஸ் வீச்சு | Up to 300 feet / 90 meters (line of sight) |
| சிக்னல்-டு-சத்தம் விகிதம் | 70 டி.பி |
| இரைச்சல் நிலை | 85 டி.பி |
| தயாரிப்பு பரிமாணங்கள் (பெறுநர்) | 22 x 14 x 6 அங்குலம் |
| பொருளின் எடை | 9 பவுண்டுகள் |
| நிறம் | கருப்பு |
| இணக்கமான சாதனங்கள் | PA System, Karaoke Machine |
| சிறப்பு அம்சம் | Volume Control (individual channel) |
| போலார் பேட்டர்ன் | ஒருநிலை |
9. உத்தரவாதம் மற்றும் ஆதரவு
For warranty information and technical support, please contact ADJ Products directly or visit their official webஎந்தவொரு உத்தரவாதக் கோரிக்கைகளுக்கும் வாங்கியதற்கான சான்றாக உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.
உற்பத்தியாளர்: ADJ தயாரிப்புகள்
பிராண்ட்: ADJ
Webதளம்: www.adj.com
10. பாதுகாப்பு தகவல்
எச்சரிக்கை: புற்றுநோய் மற்றும் பிறப்பு குறைபாடுகள் அல்லது பிற இனப்பெருக்க பாதிப்புகளை ஏற்படுத்தும் கலிபோர்னியா மாநிலத்திற்குத் தெரிந்த ஈயம் உள்ளிட்ட இரசாயனங்களுக்கு இந்த தயாரிப்பு உங்களை வெளிப்படுத்தும். மேலும் தகவலுக்கு செல்லவும் www.P65Warnings.ca.gov.
- அலகு மழை அல்லது ஈரப்பதத்தை வெளிப்படுத்த வேண்டாம்.
- Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified personnel.
- சரியான காற்றோட்டத்தை உறுதி செய்யுங்கள். காற்றோட்ட திறப்புகளை அடைக்காதீர்கள்.
- அலகுடன் வழங்கப்பட்ட பவர் அடாப்டரை மட்டுமே பயன்படுத்தவும்.
- உள்ளூர் விதிமுறைகளின்படி பேட்டரிகளை பொறுப்புடன் அப்புறப்படுத்துங்கள்.




