அறிமுகம்
This manual provides essential instructions for the safe and efficient use of your RYOBI OP404 Lithium-ion 40 Volt Battery Charger. This compact charger is designed to charge all RYOBI 40-Volt lithium-ion batteries. It features innovative charging technology to protect and extend battery life, and can be wall-mounted for convenient storage and accessibility.
முக்கியமான பாதுகாப்பு தகவல்
எச்சரிக்கை: இந்த ஆற்றல் கருவியில் வழங்கப்பட்ட அனைத்து பாதுகாப்பு எச்சரிக்கைகள், அறிவுறுத்தல்கள், விளக்கப்படங்கள் மற்றும் விவரக்குறிப்புகளைப் படிக்கவும். கீழே பட்டியலிடப்பட்டுள்ள அனைத்து வழிமுறைகளையும் பின்பற்றத் தவறினால் மின்சார அதிர்ச்சி, தீ மற்றும்/அல்லது கடுமையான காயம் ஏற்படலாம்.
- Always ensure the charger is connected to a power source with the correct voltage.
- Do not expose the charger to rain or wet conditions. Water entering a battery charger will increase the risk of electric shock.
- Use only with RYOBI 40-Volt lithium-ion batteries. Attempting to charge other types of batteries may cause personal injury and damage.
- சார்ஜர் கடுமையாக அடிபட்டிருந்தாலோ, கீழே விழுந்திருந்தாலோ அல்லது வேறுவிதமாக சேதமடைந்திருந்தாலோ அதை இயக்க வேண்டாம்.
- சார்ஜரை பிரிக்க வேண்டாம். சேவை அல்லது பழுது தேவைப்படும் போது தகுதியான சேவையாளரிடம் எடுத்துச் செல்லவும். தவறான மறுசீரமைப்பு மின்சார அதிர்ச்சி அல்லது தீ ஆபத்து ஏற்படலாம்.
- Unplug the charger from the power source before attempting any maintenance or cleaning.
- Do not use the charger in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- குழந்தைகளிடமிருந்து சார்ஜரை ஒதுக்கி வைக்கவும்.
அமைவு
Before first use, ensure the charger is placed on a stable, flat surface or securely mounted to a wall. Connect the charger's power adapter to a standard electrical outlet.

Figure 1: The RYOBI OP404 charger connected to its power adapter, ready for use.
The charger is designed for portability and can be easily transported with your tools. It also features a USB port for additional charging flexibility.

படம் 2: பக்கம் view of the RYOBI OP404 charger, highlighting the power input port.
இயக்க வழிமுறைகள்
ஒரு பேட்டரியை சார்ஜ் செய்கிறது
- Ensure the charger is plugged into a working power outlet. The "Power On" LED indicator (red) will illuminate.
- Align the RYOBI 40-Volt lithium-ion battery with the charger's battery interface.
- Slide the battery onto the charger until it clicks securely into place.
- The charger will automatically begin the charging process.

Figure 3: The RYOBI OP404 charger with a 40V battery securely attached and in the process of charging.
LED காட்டி வழிகாட்டி
The charger features LED indicators to communicate the battery's status:

படம் 4: நெருக்கமான காட்சி view of the RYOBI OP404 charger's LED indicators, detailing various status lights.
| காட்டி | நிலை | விளக்கம் |
|---|---|---|
| சிவப்பு விளக்கு (திட) | பவர் ஆன் | The charger is connected to power and ready. |
| Orange Light (Flashing) | சோதனை | The charger is evaluating the battery condition. |
| Red Light (Flashing) | குறைபாடுள்ள | The battery is defective and cannot be charged. |
| Green Light (Flashing) | சார்ஜ் செய்கிறது | பேட்டரி தற்போது சார்ஜ் ஆகிறது. |
| பச்சை விளக்கு (திட) | தயார் | பேட்டரி முழுமையாக சார்ஜ் செய்யப்பட்டு பயன்படுத்த தயாராக உள்ளது. |
பராமரிப்பு
வழக்கமான பராமரிப்பு உங்கள் சார்ஜரின் உகந்த செயல்திறன் மற்றும் நீண்ட ஆயுளை உறுதி செய்கிறது.
- சுத்தம்: Disconnect the charger from the power source before cleaning. Use a clean, dry cloth to wipe off any dust or debris from the charger's exterior. Do not use solvents or harsh chemicals.
- சேமிப்பு: Store the charger in a cool, dry place, away from direct sunlight and moisture.
- ஆய்வு: Periodically inspect the power cord and charger for any signs of damage. If any damage is found, discontinue use and contact customer support.
சரிசெய்தல்
If you encounter issues with your RYOBI OP404 charger, refer to the following common troubleshooting steps:
- சார்ஜர் இயக்கப்படவில்லை:
- Ensure the power cord is securely plugged into both the charger and a functional electrical outlet.
- Check the outlet with another device to confirm it has power.
- Battery not charging (Defective LED flashing):
- Remove the battery from the charger and re-insert it to ensure proper connection.
- If the "Defective" LED continues to flash, the battery may be damaged or at the end of its life.
- மெதுவாக சார்ஜ் செய்தல்:
- Ensure the charger is operating within its recommended temperature range. Extreme temperatures can affect charging speed.
- Verify that the battery is a genuine RYOBI 40-Volt lithium-ion battery.
For further assistance, please refer to the official RYOBI product support resources.
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| பிராண்ட் | ரியோபி |
| மாதிரி எண் | OP401A |
| தயாரிப்பு பரிமாணங்கள் | 3 x 5 x 1 அங்குலம் (7.62 x 12.7 x 2.54 செமீ) |
| பொருளின் எடை | 12.6 அவுன்ஸ் (0.36 கிலோகிராம்) |
| வெளியீடு தொகுதிtage | 40 வோல்ட் |
| உள்ளீடு தொகுதிtage | 40 வோல்ட் |
| முதல் தேதி கிடைக்கும் | ஜூன் 13, 2019 |
உத்தரவாதம் மற்றும் ஆதரவு
For detailed warranty information and customer support, please refer to the official RYOBI website or the documentation included with your product at the time of purchase. Keep your proof of purchase for warranty claims.





