GYSFLASH 30.12 PL Smart Charger User Manual

1. அறிமுகம்

Welcome to the user manual for the GYSFLASH 30.12 PL, a versatile smart charger designed for 12V lead-acid and lithium iron phosphate (LiFePO4) batteries. This manual provides essential information for safe and effective operation, setup, and maintenance of your charger. Please read this manual thoroughly before using the device.

2. முக்கியமான பாதுகாப்பு வழிமுறைகள்

To ensure safe operation and prevent damage to the charger or battery, observe the following safety precautions:

• Always read the entire instruction manual before operating the charger.
• வெப்பம் அதிகரிப்பதைத் தடுக்க சார்ஜ் செய்யும் போது போதுமான காற்றோட்டத்தை உறுதி செய்யவும்.
• Avoid short-circuiting the charging clamps.
• The charger is equipped with reverse polarity protection; however, always connect the red (+) clamp to the positive (+) terminal and the black (-) clamp எதிர்மறை (-) முனையத்திற்கு.
• Disconnect the charger from the mains power before connecting or disconnecting the battery clamps.
• சார்ஜரை மழை அல்லது அதிக ஈரப்பதத்திற்கு வெளிப்படுத்த வேண்டாம்.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.
• ரீசார்ஜ் செய்ய முடியாத பேட்டரிகளை சார்ஜ் செய்ய முயற்சிக்காதீர்கள்.

3. தயாரிப்பு முடிந்துவிட்டதுview

The GYSFLASH 30.12 PL is a high-power, auto-sensing battery support unit with advanced features for various battery types and applications.

முக்கிய அம்சங்கள்:

• Double Technology: Compatible with both 12V lead-acid (GEL, AGM, liquid, calcium) and lithium iron phosphate (LiFePO4) batteries.
• உயர் ஆற்றல் வெளியீடு: Delivers a continuous 30 A at 100% duty cycle (40°C).
• Three Charging Currents: Selectable charging currents of 7 A, 15 A, and 30 A to match battery capacity.
• ஷோரூம் பயன்முறை: Provides a stable power supply of up to 30A for maintaining battery charge in exhibited vehicles or during diagnostic procedures.
• விநியோக முறை: Offers a stable on-board power supply, useful for maintaining vehicle electronics during battery changes or software updates.
• Wide Battery Capacity Range: Charges 12V lead-acid batteries from 15 Ah to 375 Ah and LiFePO4 batteries from 7 Ah to 375 Ah.
• நினைவக காப்புப்பிரதி: Retains vehicle memory information during battery removal.
• Optimized Battery Retention: Can remain connected to the battery during hibernation with an auto-restart function in case of power failure.
• குறைந்த தொகுதிtagஇ சார்ஜிங்: Capable of initiating charging for batteries as low as 2 V.

Figure 1: Front panel of the GYSFLASH 30.12 PL charger, displaying mode selection, battery type indicators, and charging current options.

4. அமைவு மற்றும் இணைப்பு

4.1 பேக்கிங்

Carefully unpack the GYSFLASH 30.12 PL charger and inspect for any visible damage. Retain the packaging for future storage or transport.

4.2 பேட்டரியுடன் இணைத்தல்

1. Ensure the charger's power cord is disconnected from the mains power outlet.
2. இணைக்கவும் சிவப்பு (+) சார்ஜிங் clamp பாதுகாப்பாக நேர்மறை (+) பேட்டரி முனையம்.
3. இணைக்கவும் கருப்பு (-) சார்ஜிங் clamp பாதுகாப்பாக எதிர்மறை (-) பேட்டரி முனையம்.
4. Verify that both connections are firm and free from corrosion.

4.3 Connecting to Mains Power

ஒருமுறை பேட்டரி clamps are securely connected, plug the charger's power cord into a suitable 230V AC, 50/60Hz power outlet.

Figure 2: GYSFLASH 30.12 PL connected to a vehicle battery for charging or support.

5. இயக்க வழிமுறைகள்

5.1 Automatic Charging

The GYSFLASH 30.12 PL features an integrated temperature sensor that automatically adjusts charging parameters based on the ambient temperature, optimizing charging efficiency and battery life.

5.2 பயன்முறை தேர்வு

பயன்படுத்தவும் "MODE" button on the charger's front panel to select the appropriate charging program for your battery type:

• Pb (Lead-Acid): Select this mode for 12V lead-acid batteries, including GEL, AGM, liquid, and calcium types. Suitable for capacities from 15 Ah to 375 Ah.
• LiFePO4 (Lithium Iron Phosphate): Select this mode for 12V lithium iron phosphate batteries. Suitable for capacities from 7 Ah to 375 Ah.

5.3 Charging Current Selection

After selecting the battery type, choose one of the three available charging currents (7 A, 15 A, or 30 A) based on the battery's capacity and desired charging speed. Higher currents charge faster but should be appropriate for the battery's specifications.

5.4 Showroom Mode

This mode is designed to provide a stable power supply of up to 30A. It is ideal for maintaining the battery charge in vehicles displayed in showrooms or during diagnostic procedures, preventing battery drain without overcharging.

5.5 விநியோக முறை

The Supply Mode provides a stable on-board power supply to the vehicle's electrical system. This is particularly useful for maintaining power to vehicle electronics when the battery is being changed or during software updates, preventing loss of settings or data.

6. சார்ஜிங் செயல்முறை

1. Connect the charger to the battery terminals, ensuring correct polarity (red to positive, black to negative).
2. Plug the charger's power cord into a mains power outlet.
3. அழுத்தவும் "MODE" button to select the appropriate battery type (Pb for lead-acid or LiFePO4 for lithium).
4. Select the desired charging current (7 A, 15 A, or 30 A) based on your battery's requirements.
5. The charger will automatically begin the charging cycle. Monitor the progress indicators on the display.
6. Once the charging cycle is complete, first disconnect the charger from the mains power outlet.
7. Then, disconnect the black (-) clamp from the battery, followed by the red (+) clamp.

7. பராமரிப்பு

• Keep the charger clean and dry. Wipe the casing உடன் மென்மையான, damp துணி. கடுமையான இரசாயனங்கள் அல்லது உராய்வுகள் பயன்படுத்த வேண்டாம்.
• Store the charger in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• Do not attempt to open the charger casing or perform any internal repairs. Refer all servicing to qualified personnel.
• சார்ஜிங் கேபிள்கள் மற்றும் சார்ஜிங் க்யூக்களை தவறாமல் சரிபார்க்கவும்.amps for any signs of damage, wear, or corrosion. Replace damaged components immediately.

8. சரிசெய்தல்

If you encounter issues with your GYSFLASH 30.12 PL, refer to the table below for common problems and solutions.

9. தொழில்நுட்ப விவரக்குறிப்புகள்

10. உத்தரவாதம் மற்றும் ஆதரவு

The GYSFLASH 30.12 PL is covered by a 2 வருட உள்ளூர் உத்தரவாதம். For technical assistance, warranty claims, or service inquiries, please contact your authorized GYS dealer or the official GYS support center. Please retain your proof of purchase for warranty validation.

For additional information and resources, please visit the official GYS webதளம்.