சார்டோரியஸ் ப்ரோலைன் பிளஸ் பைப்பேட் மல்டிபேக் LH-728671 பயனர் கையேடு

1. அறிமுகம்

This manual provides comprehensive instructions for the safe and effective use of the Sartorius Proline Plus Pipette Multipack LH-728671. It covers product overview, setup, operation, maintenance, troubleshooting, and specifications. Please read this manual thoroughly before using the product to ensure proper handling and optimal performance.

2. தயாரிப்பு முடிந்துவிட்டதுview

The Sartorius Proline Plus Pipette Multipack LH-728671 is designed for precise liquid handling in laboratory environments. This multipack includes a selection of Proline Plus single-channel mechanical pipettes, compatible Optifit tip racks, and a linear stand for convenient storage.

2.1 சேர்க்கப்பட்டுள்ள கூறுகள்:

• Proline Plus Pipettes:
  • One 2-20 µl Proline Plus Pipette
  • One 20-200 µl Proline Plus Pipette
  • One 100-1000 µl Proline Plus Pipette
• Optifit Tip Racks:
  • Compatible tip racks for 0.5-200 µl pipettes
  • Compatible tip racks for 10-1000 µl pipettes
• x3 Linear Stand & Pipette Holder

3 அமைவு

3.1 Assembling the Linear Stand

1. Unpack all components of the linear stand.
2. Connect the base parts securely. Ensure all connections are firm.
3. Place the assembled stand on a stable, level surface.

3.2 Placing Pipettes in the Stand

• Gently insert each Proline Plus pipette into the designated slots on the linear stand.
• Ensure pipettes are securely seated to prevent accidental falls.

3.3 Loading Tip Racks

• Open the Optifit tip rack packaging.
• Place the appropriate tip rack near your workspace for easy access during pipetting.
• Ensure the tip rack matches the volume range of the pipette being used.

4. இயக்க வழிமுறைகள்

4.1 தொகுதி சரிசெய்தல்

1. Turn the volume adjustment knob (located at the top of the pipette) clockwise to decrease the volume and counter-clockwise to increase it.
2. Set the desired volume, ensuring the display shows the correct value.
3. Do not exceed the maximum or go below the minimum volume range of the pipette.

4.2 Attaching a Tip

• Press the pipette nozzle firmly into a tip in the tip rack.
• Ensure the tip is securely attached and forms an airtight seal.

4.3 Aspirating Liquid

1. Press the operating button down to the first stop.
2. Immerse the tip into the liquid to the appropriate depth (typically 1-2 mm for small volumes, 3-6 mm for larger volumes).
3. Slowly release the operating button to aspirate the liquid. Wait a moment for the liquid to enter the tip completely.

4.4 Dispensing Liquid

1. Place the tip against the inner wall of the receiving vessel at a slight angle.
2. Press the operating button down slowly to the first stop to dispense the liquid.
3. Continue pressing the button to the second stop (blow-out) to expel any residual liquid from the tip.
4. Keep the button pressed and withdraw the pipette from the vessel.

4.5 Tip Ejection

• Point the pipette into a waste container.
• Press the tip ejector button to discard the used tip.

5. பராமரிப்பு

5.1 சுத்தம் செய்தல்

• Regularly wipe the exterior of the pipettes with a soft cloth dampened with mild detergent or 70% ethanol.
• Do not immerse the entire pipette in liquid.
• For internal cleaning or decontamination, refer to the detailed instructions provided with individual pipette models or contact Sartorius service.

5.2 அளவுத்திருத்தம்

• Pipettes should be calibrated regularly according to laboratory standards and regulatory requirements.
• Calibration should be performed by qualified personnel or an authorized service provider.

5.3 சேமிப்பு

• Store pipettes vertically in the linear stand when not in use to prevent contamination and damage.
• Store in a clean, dry environment, away from direct sunlight and extreme temperatures.

6. சரிசெய்தல்

6.1 Inaccurate Pipetting

• சாத்தியமான காரணம்: Improper tip attachment. தீர்வு: Ensure tip is securely and airtightly attached.
• சாத்தியமான காரணம்: Incorrect pipetting technique. தீர்வு: Review operating instructions for aspiration and dispensing.
• சாத்தியமான காரணம்: Pipette requires calibration. தீர்வு: Arrange for professional calibration.
• சாத்தியமான காரணம்: Damaged tip cone or piston. தீர்வு: Contact Sartorius service for inspection and repair.

6.2 Leaking Tip

• சாத்தியமான காரணம்: Tip not properly seated. தீர்வு: Re-attach tip firmly.
• சாத்தியமான காரணம்: Incompatible tip used. தீர்வு: Use only Sartorius Optifit tips.
• சாத்தியமான காரணம்: Damaged O-ring or tip cone. தீர்வு: Contact Sartorius service for inspection and repair.

6.3 Operating Button Sticking

• சாத்தியமான காரணம்: மாசுபடுதல். தீர்வு: Clean the pipette exterior. If internal, contact service.
• சாத்தியமான காரணம்: இயந்திர சிக்கல். தீர்வு: Contact Sartorius service.

7. விவரக்குறிப்புகள்

• மாதிரி: LH-728671
• பிராண்ட்: சர்டோரியஸ்
• Pipette Types: Proline Plus Single-Channel Mechanical Pipettes
• Included Pipette Volumes: 2-20 µl, 20-200 µl, 100-1000 µl
• Compatible Tip Racks: Optifit Tip Racks for 0.5-200 µl and 10-1000 µl
• துணைக்கருவிகள்: x3 Linear Stand & Pipette Holder
• தொகுப்பு அளவுகள்: 6 x 6 x 6 அங்குலம்
• தொகுப்பு எடை: 2 பவுண்டுகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

For detailed warranty information, please refer to the documentation included with your product or visit the official Sartorius website. For technical support, service, or spare parts, please contact your local Sartorius representative or authorized dealer. Provide your product model number (LH-728671) and serial number when requesting support.