LogiLink ET0009 மெக்கானிக்கல் DIN-ரயில் நேர சுவிட்ச் பயனர் கையேடு

1. அறிமுகம்

The LogiLink ET0009 is a mechanical DIN-rail time switch designed for controlling electrical installations based on a 24-hour program. This device allows you to automate the switching ON and OFF of various electrical loads such as lighting systems, irrigation systems, water heaters, and other private or industrial electrical circuits. It offers reliable time-based control with easy mechanical programming.

முக்கிய அம்சங்கள்:

• 24-hour programming capability.
• Minimum operating time: 15 minutes per day, 2 hours per week.
• Manual switch position: ON/Automatic.
• IP20 பாதுகாப்பு மதிப்பீடு.
• Supports 48 ON/OFF programs (2 x 16 combinations).
• Designed for 35 mm DIN rails.

2. பாதுகாப்பு வழிமுறைகள்

எச்சரிக்கை: Installation and maintenance of this device must only be performed by a qualified electrician in accordance with all local and national electrical codes. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always disconnect power at the main circuit breaker before installing or servicing the time switch.
• Ensure the device is rated for the voltage and current of the circuit it will control.
• சாதனத்தை ஈரப்பதம் அல்லது தீவிர வெப்பநிலைக்கு வெளிப்படுத்த வேண்டாம்.
• Verify all connections are secure to prevent loose wiring and potential hazards.
• The device has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Install in a dry environment.

3. தயாரிப்பு முடிந்துவிட்டதுview

Familiarize yourself with the components of your LogiLink ET0009 time switch.

படம் 1: முன் view of the LogiLink ET0009 Mechanical DIN-Rail Time Switch, showing the terminal connections at the top and the mechanical programming dial with time indicators and manual override switch on the front.

படம் 2: நெருக்கமான காட்சி view of the mechanical programming dial and the manual override switch. The dial features segments for setting ON/OFF times, and the switch allows for manual operation or automatic mode.

படம் 3: மேலிருந்து கீழ் view of the time switch, highlighting the DIN-rail mounting clips at the bottom, which secure the device to a standard 35mm DIN rail.

படம் 4: பின்புறம் view of the LogiLink ET0009, displaying printed technical specifications, wiring diagram, and compliance markings.

4. நிறுவல்

The LogiLink ET0009 is designed for mounting on a standard 35mm DIN rail within an electrical enclosure.

1. மின் துண்டிப்பு: Before starting any installation, ensure the main power supply to the circuit is completely disconnected at the circuit breaker or fuse box. Verify with a voltagஇ சோதனையாளர்.
2. மவுண்டிங்: Clip the time switch onto the 35mm DIN rail in your electrical panel. Ensure it is securely fastened.
3. வயரிங்: Refer to the wiring diagram printed on the device (see Figure 4) and follow these general guidelines:
   • Connect the incoming live (L) and neutral (N) wires to the input terminals marked 'L' and 'N' respectively.
   • Connect the live wire of the load (e.g., light, water heater) to the output terminal marked '1'.
   • Connect the neutral wire of the load to the output terminal marked '2'.
   • அனைத்து கம்பி இணைப்புகளும் இறுக்கமாகவும் பாதுகாப்பாகவும் இருப்பதை உறுதி செய்யவும்.
4. சரிபார்ப்பு: Double-check all wiring connections for correctness and security before restoring power.
5. சக்தியை மீட்டமை: நிறுவல் முடிந்து சரிபார்க்கப்பட்டவுடன், சுற்றுக்கு மின்சாரத்தை மீட்டெடுக்கவும்.

5. இயக்க வழிமுறைகள்

The LogiLink ET0009 uses a mechanical dial for programming ON/OFF cycles.

1. தற்போதைய நேரத்தை அமைக்கவும்: Rotate the entire dial clockwise until the current time aligns with the arrow indicator on the front panel. The dial is marked with 24 hours.
2. நிகழ்ச்சி ஆன்/ஆஃப் நேரங்கள்: The dial has small segments around its circumference. Each segment typically represents a 15-minute interval.
   • To set an "ON" period, push the corresponding segments outwards.
   • To set an "OFF" period, leave the corresponding segments pushed inwards.
   • The timer supports up to 48 ON/OFF switching programs per 24-hour cycle.
3. கைமுறை மேலெழுதல் சுவிட்ச்: The switch on the front panel (often marked with symbols like 'I', 'O', and a clock icon) allows you to manually control the output.
   • 'I' (ON): Keeps the output continuously ON, overriding the program.
   • 'O' (OFF): Keeps the output continuously OFF, overriding the program.
   • Clock Icon (AUTO): The timer operates according to the programmed ON/OFF cycles. Ensure this position is selected for automatic operation.
4. ஆபரேஷன்: Once programmed and set to AUTO, the timer will automatically switch the connected load ON and OFF at the set times.

6. பராமரிப்பு

The LogiLink ET0009 time switch requires minimal maintenance.

• சுத்தம்: Disconnect power before cleaning. Use a dry, soft cloth to wipe the exterior of the device. Do not use liquid cleaners or solvents.
• ஆய்வு: Periodically check the wiring connections to ensure they remain secure. Inspect for any signs of damage or overheating.
• சுற்றுச்சூழல்: Ensure the installation environment remains dry and free from excessive dust or corrosive substances.

7. சரிசெய்தல்

If you encounter issues with your LogiLink ET0009 time switch, refer to the following common problems and solutions:

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official LogiLink webஉத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

தொடர்பு தகவல்:

• Manufacturer: 2direct GmbH
• மிகவும் புதுப்பித்த ஆதரவு தகவலுக்கு, தயவுசெய்து பார்வையிடவும் www.logilink.eu.