அறிமுகம்
This manual provides essential information for the safe and efficient operation of your EMAX ESP10V080V3PK 10 HP 80 Gallon Oil-Lube Stationary Air Compressor with 115V 7.2 Amp Refrigerated Corded Air Dryer Bundle. This industrial-grade system is designed for commercial and industrial applications, offering high performance and durability. Proper installation, operation, and maintenance are crucial for maximizing the lifespan and efficiency of your equipment.

Figure 1: The EMAX ESP10V080V3PK 10 HP 80 Gallon Oil-Lube Stationary Air Compressor with its accompanying Refrigerated Air Dryer.
பாதுகாப்பு தகவல்
Always observe the following safety precautions to prevent injury and equipment damage. This equipment operates under high pressure and with high voltagமின் மின்சாரம்.
- கையேட்டைப் படியுங்கள்: Before operating, read and understand all instructions and warnings in this manual.
- மின் பாதுகாப்பு: Ensure the compressor and dryer are connected to a properly grounded electrical supply matching the specified voltage (115V or 460V, 3-Phase). Disconnect power before performing any maintenance or service.
- அழுத்த பாதுகாப்பு: Never exceed the maximum operating pressure of the compressor or any attached tools/hoses. Always wear appropriate eye protection when operating.
- காற்றோட்டம்: வெப்பம் அதிகரிப்பதைத் தடுக்கவும், சரியான காற்று உட்கொள்ளலை உறுதி செய்யவும், நன்கு காற்றோட்டமான பகுதியில் கம்ப்ரசரை இயக்கவும்.
- பராமரிப்பு: Perform all maintenance as scheduled. Do not attempt repairs beyond your capability. Consult qualified personnel for complex issues.
- நகரும் பாகங்கள்: Keep hands, hair, and clothing clear of moving parts, such as the belt and fan.
- முன்மொழிவு 65 எச்சரிக்கை: கேன்சர் மற்றும் பிறப்பு குறைபாடுகள் அல்லது பிற இனப்பெருக்கத்திற்கு தீங்கு விளைவிப்பதற்காக கலிபோர்னியா மாநிலத்திற்கு தெரிந்த இரசாயனங்கள் இந்த தயாரிப்பு உங்களை வெளிப்படுத்தக்கூடும்.
அமைவு மற்றும் நிறுவல்
1. பேக்கிங் மற்றும் ஆய்வு
Carefully remove the compressor and dryer from their packaging. Inspect both units for any shipping damage. Report any damage to your supplier immediately.
2. வேலை வாய்ப்பு
Place the compressor and dryer on a firm, level surface capable of supporting their combined weight (approximately 1073 pounds). Ensure adequate clearance around the units for ventilation and maintenance access. Avoid placing in direct sunlight or near heat sources.
3. மின்சார இணைப்பு
The EMAX ESP10V080V3PK requires a 3-phase electrical supply, configurable for either 115 Volts or 460 Volts. Consult a qualified electrician for proper wiring and connection to ensure compliance with local electrical codes and safety standards. The system includes industrial TEFC electric motors and magnetic starters.

படம் 2: எ.காample of an electrical connection component (Hubbell box) on the compressor.
4 ஆரம்ப சோதனைகள்
- எண்ணெய் நிலை: Verify the oil level in the compressor pump. The pump is pressure lubricated. Refer to the sight glass or dipstick for correct levels.
- பெல்ட் டென்ஷன்: Check the tension of the drive belt. The unit features a belt tensioner for easy adjustment. Ensure the belt is properly aligned and tensioned according to manufacturer specifications.

Figure 3: The belt tensioner mechanism, designed for easy adjustment.
5. Connecting the Air Dryer
Connect the refrigerated air dryer to the compressor's air outlet. Ensure all connections are secure and leak-free. The dryer is designed to remove moisture, oil, and dirt from the compressed air, improving air quality and protecting downstream equipment. Note that hydraulic hoses or connection lines are not included in this bundle.
ஆபரேஷன்
1. Starting the Compressor
After ensuring all connections are secure and initial checks are complete, turn on the main power switch for the compressor. The compressor will begin to build pressure in the 80-gallon ASME tank (rated for 200 PSI). The unit delivers 38 CFM at 100 PSI, with a top PSI of 175.
2. அழுத்தம் சரிசெய்தல்
Adjust the pressure regulator to the desired output pressure for your application. Always ensure the set pressure does not exceed the maximum rating of your air tools or accessories.
3. Continuous Run Function
The EMAX compressor features a continuous run option. To activate this, locate and engage the continuous run valve. This function allows the compressor to run continuously, maintaining a consistent air supply for demanding applications.

Figure 4: The continuous run valve, allowing for uninterrupted operation.
4. Air Dryer Operation
The 58 CFM refrigerated air dryer operates automatically to remove moisture. Monitor the filter change indicator on the dryer's control panel. A change in the indicator's color or position signals that the coalescing filters require attention or replacement.

Figure 5: Air dryer control panel with filter change indicator.
பராமரிப்பு
Regular maintenance is essential for the longevity and optimal performance of your EMAX air compressor and dryer bundle. Always disconnect power before performing any maintenance.
1. Daily/Weekly Checks
- வடிகால் தொட்டி: The compressor features an automatic tank drain. Verify its proper operation to ensure condensate is regularly removed from the air tank.
- எண்ணெய் நிலை: Check the compressor pump oil level. Add oil if necessary, using only recommended compressor oil.
- காற்று வடிகட்டி: Inspect the compressor's air intake filter. Clean or replace if dirty to ensure proper airflow and prevent contamination.
2. Monthly/Quarterly Checks
- Belt Tension and Condition: Inspect the drive belt for wear, cracks, or fraying. Adjust tension using the belt tensioner if needed.
- Air Dryer Filters: Replace the coalescing filters in the refrigerated air dryer as indicated by the filter change indicator or according to the dryer's maintenance schedule.
- பொது சுத்தம்: Keep the compressor and dryer clean and free of dust and debris to ensure proper cooling and operation.

Figure 6: Internal components of the refrigerated air dryer, including filters.

படம் 7: விரிவானது view of the air dryer's internal filtration and cooling system.
சரிசெய்தல்
This section provides solutions to common operational issues. For problems not listed or if solutions do not resolve the issue, contact EMAX customer support.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| அமுக்கி தொடங்கவில்லை | No power supply; tripped circuit breaker; faulty motor. | Check power connection and circuit breaker. Consult an electrician if motor is suspected faulty. |
| குறைந்த காற்று அழுத்த வெளியீடு | Air leaks; clogged air filter; worn piston rings. | Check all air connections for leaks. Clean or replace air filter. Contact service for internal component issues. |
| அதிக சத்தம் அல்லது அதிர்வு | Loose components; worn bearings; improper belt tension. | Inspect and tighten all fasteners. Check belt tension and condition. Consult service for internal component wear. |
| Air dryer not removing moisture | Clogged filters; refrigerant issue; improper ambient temperature. | Check and replace coalescing filters. Ensure proper ventilation around dryer. Contact service for refrigerant issues. |
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| பிராண்ட் | EMAX |
| மாதிரி பெயர் | ESP10V080V3PK |
| மோட்டார் குதிரைத்திறன் | 10 ஹெச்பி |
| அமுக்கி கொள்ளளவு | 80 கேலன்கள் |
| Air Flow Capacity (Dryer) | 58 CFM |
| Compressor Air Delivery | 38 CFM @ 100 PSI |
| அதிகபட்ச அழுத்தம் | 175 பி.எஸ்.ஐ |
| தொகுதிtage | 115 Volts, 460 Volts (3-Phase) |
| சக்தி ஆதாரம் | மின்சாரத்தால் இயங்கும் |
| இரைச்சல் நிலை | 35 dB (Whisper 100 silent air system) |
| பொருளின் எடை | 1073 பவுண்டுகள் |
| Tank Rating | ASME 200PSI |
| உள்ளிட்ட கூறுகள் | வடிப்பான்கள் |
| சிறப்பு அம்சங்கள் | Patented pressure lubricated pump, Continuous run option, Belt tensioner, Automatic tank drain, Industrial grade TEFC motor, Refrigerated Air Dryer with coalescing filters. |
| பரிந்துரைக்கப்பட்ட பயன்பாடுகள் | Powering Pneumatic Tools, Spraying, Air Brushing, Industrial Processes |
| UPC | 815002014333 |
உத்தரவாத தகவல்
EMAX provides a 1 வருட உத்தரவாதம் on material and workmanship for the ESP10V080V3PK Air Compressor and Dryer Bundle. For detailed warranty terms and conditions, please refer to the documentation included with your product or contact EMAX customer support.
வாடிக்கையாளர் ஆதரவு
For technical assistance, parts, or service inquiries regarding your EMAX ESP10V080V3PK Air Compressor and Dryer Bundle, please contact EMAX customer support. Have your model number (ESP10V080V3PK) and purchase information ready when contacting support.
You can visit the official EMAX webதொடர்பு விவரங்கள் மற்றும் கூடுதல் ஆதாரங்களுக்கான தளம். Visit the EMAX Store on Amazon மேலும் தகவலுக்கு.





