PowerWalker VFI 3000 AT UPS User Manual

அறிமுகம்

The PowerWalker VFI AT series is an online Uninterruptible Power Supply (UPS) system designed to provide reliable power protection for critical electronic devices. This manual provides essential information for the safe and efficient operation of your PowerWalker VFI 3000 AT UPS, model 10122182.

முக்கியமான பாதுகாப்பு வழிமுறைகள்

Please read and follow all instructions carefully before installing, operating, or servicing the UPS. Keep this manual for future reference.

• இந்த UPS-ல் அபாயகரமான மின்னழுத்தம் உள்ளது.tages. Do not attempt to disassemble the unit. Servicing should only be performed by qualified personnel.
• UPS ஒரு தரையிறக்கப்பட்ட AC மின் நிலையத்துடன் இணைக்கப்பட வேண்டும்.
• Do not block ventilation openings. Ensure adequate airflow around the UPS.
• Do not install the UPS in direct sunlight, near heat sources, or in environments with excessive dust, humidity, or corrosive substances.
• The internal batteries are not user-replaceable. Contact qualified service personnel for battery replacement.
• In case of fire, use a dry chemical fire extinguisher. Water can be dangerous.

தொகுப்பு உள்ளடக்கங்கள்

Verify that all items listed below are included in your package. If any items are missing or damaged, contact your dealer.

• PowerWalker VFI 3000 AT UPS Unit
• பயனர் கையேடு (இந்த ஆவணம்)
• USB தொடர்பு கேபிள்
• பவர் உள்ளீட்டு கேபிள்
• மென்பொருள் குறுவட்டு (பொருந்தினால்)

தயாரிப்பு முடிந்துவிட்டதுview

முன் குழு

படம் 1: முன் view of the PowerWalker VFI 3000 AT UPS. This image displays the main chassis, ventilation grilles, and the front control panel with its LCD screen and buttons.

படம் 2: விரிவான view of the UPS front panel. The LCD screen shows input/output voltage and load status. Below the screen are control buttons: ON, OFF, ENTER, and ESC, used for navigating menus and controlling the unit.

The front panel features an LCD display that provides real-time information about the UPS status, including input/output voltage, battery level, and load capacity. Control buttons allow for navigation through the display menus and basic operation of the unit.

பின்புற பேனல்

படம் 3: பின்புறம் view of the PowerWalker VFI 3000 AT UPS. This panel includes multiple Type F earthing contact outlets for connecting protected devices, cooling fans, a main power input, and communication ports (USB, RS-232, and an optional slot for network card).

The rear panel provides the necessary connections for input power, output to protected devices, and communication interfaces. It includes four Type F earthing contact outlets, a terminal output, USB and RS-232 communication ports, and slots for optional accessories like network cards.

அமைவு வழிமுறைகள்

1. வேலை வாய்ப்பு

• Place the UPS on a flat, stable surface.
• Ensure the environment is well-ventilated and free from excessive dust or moisture.
• Maintain at least 20 cm (8 inches) of clearance from the rear and sides of the UPS for proper airflow.
• Avoid placing the UPS near heat-emitting appliances.

2. சக்தியுடன் இணைக்கிறது

1. Connect the provided power input cable to the UPS input receptacle on the rear panel.
2. Plug the other end of the power input cable into a grounded wall outlet.
3. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery performance.

3. இணைக்கும் சாதனங்கள்

1. Plug your critical devices (e.g., computers, servers, network equipment) into the Type F output receptacles on the rear panel of the UPS.
2. Ensure that the total load connected to the UPS does not exceed its rated capacity (2700W for this model).
3. For devices requiring terminal output, connect them according to electrical safety standards.

4 ஆரம்ப தொடக்கம்

1. After connecting the UPS to AC power and allowing initial charging, press and hold the ON button on the front panel for approximately 2 seconds.
2. The UPS will perform a self-test, and the LCD display will illuminate, indicating operational status.
3. The UPS is now providing protected power to the connected devices.

யுபிஎஸ் இயக்குதல்

ஆன்/ஆஃப்

• இயக்க: அழுத்திப் பிடிக்கவும் ON 2 விநாடிகளுக்கான பொத்தான்.
• அணைப்பதற்கு: அழுத்திப் பிடிக்கவும் முடக்கப்பட்டுள்ளது button for 2 seconds. The UPS will shut down, and power to connected devices will cease.

எல்சிடி டிஸ்ப்ளேவைப் புரிந்துகொள்வது

The LCD display provides critical information about the UPS status. Use the உள்ளிடவும் மற்றும் ESC buttons to navigate through different display screens, which may include:

• உள்ளீடு தொகுதிtagஇ மற்றும் அதிர்வெண்
• வெளியீடு தொகுதிtagஇ மற்றும் அதிர்வெண்
• பேட்டரி சார்ஜ் நிலை
• சதவீதம் ஏற்றவும்tage
• Operating Mode (Online, Battery, Bypass)
• பிழை குறியீடுகள் (ஏதேனும் இருந்தால்)

பேட்டரி காப்பு செயல்பாடு

ஒரு சக்தி ou நிகழ்வில்tage அல்லது குறிப்பிடத்தக்க அளவுtage fluctuation, the UPS will automatically switch to battery power to provide continuous power to connected devices. An audible alarm may sound, and the LCD will indicate "Battery Mode." The duration of battery backup depends on the load connected and the battery charge level.

தொடர்பு மென்பொருள்

For advanced monitoring and management, install the provided communication software on a computer connected to the UPS via the USB or RS-232 port. This software allows for scheduled shutdowns, remote monitoring, and detailed event logging.

பராமரிப்பு

பேட்டரி பராமரிப்பு

• Ensure the UPS is connected to AC power at all times to keep the batteries fully charged.
• Perform a battery self-test periodically (e.g., once every 3 months) using the UPS front panel controls or communication software to verify battery health.
• Batteries have a limited lifespan. If the battery backup time significantly decreases, contact qualified service personnel for replacement.

சுத்தம் செய்தல்

• Disconnect the UPS from AC power and all connected devices before cleaning.
• Use a soft, dry cloth to wipe the exterior of the UPS.
• Do not use liquid or aerosol cleaners, as they may damage the unit.
• Periodically clean the ventilation grilles to prevent dust buildup, which can impede airflow and cause overheating.

சேமிப்பு

• If storing the UPS for an extended period, ensure the batteries are fully charged.
• Store the UPS in a cool, dry place.
• Recharge the batteries every 3 months during storage to prevent deep discharge and prolong battery life.

சரிசெய்தல்

Refer to the table below for common issues and their solutions. If the problem persists, contact technical support.

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

The PowerWalker VFI 3000 AT UPS is covered by a manufacturer's warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official PowerWalker webதளம்.

For technical support, service inquiries, or to report any issues, please contact your local dealer or PowerWalker customer service. Have your model number (10122182) and purchase information ready when contacting support.