LENSGO 318C Wireless Lavalier Microphone User Manual

அறிமுகம்

This manual provides detailed instructions for the setup, operation, and maintenance of your LENSGO 318C Wireless Lavalier Microphone system. The LENSGO 318C is a compact UHF wireless microphone system designed for clear audio recording with various devices, including cameras, smartphones, and camcorders.

Please read this manual thoroughly before using the product to ensure proper function and to maximize its performance.

தொகுப்பு உள்ளடக்கங்கள்

கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உங்கள் தொகுப்பில் சேர்க்கப்பட்டுள்ளதா என்பதை சரிபார்க்கவும்:

• Transmitter (TX) Unit
• Receiver (RX) Unit
• காந்த கிளிப்
• Windproof Frabbit Fur (Windscreen)
• காந்த கொக்கி
• Microphone Collar Clip
• Camera Cable (TRS)
• External Lavalier Microphone
• USB சார்ஜிங் கேபிள் (மைக்ரோ USB)
• Smartphone Cable (TRRS)
• Card Pin (for reset)
• சேமிப்பு பை
• அறிவுறுத்தல் கையேடு
• உத்தரவாத அட்டை

Image: All components included in the LENSGO 318C Wireless Lavalier Microphone system package.

தயாரிப்பு முடிந்துவிட்டதுview

The LENSGO 318C system consists of a transmitter (TX) and a receiver (RX) unit, both featuring a compact design and magnetic attachment for versatile placement.

முக்கிய அம்சங்கள்:

• UHF Wireless Transmission: Utilizes UHF technology for stable signal transmission over distances up to 30 meters (98.4 ft) in open areas.
• 20 Selectable Channels: Offers multiple channels to avoid interference and ensure clear audio.
• Magnetic Module Combination: Allows for convenient disassembly and assembly, enabling flexible mounting options.
• Built-in and External Microphone Options: Features a built-in microphone, with an option to connect an external lavalier microphone for enhanced audio capture.
• ரிச்சார்ஜபிள் பேட்டரி: Each unit includes a 500 mAh rechargeable battery, providing approximately 4 hours of operation on a full charge.
• பரந்த இணக்கத்தன்மை: Compatible with DSLR cameras, camcorders, iPhones, Android smartphones, iPads, and computers (may require additional adapters).

Image: Detailed product analysis highlighting the various parts and functions of the LENSGO 318C transmitter and receiver units.

Image: The LENSGO 318C units demonstrating the magnetic module combination for easy attachment.

அமைவு வழிகாட்டி

1. Charging the Units:

Before first use, fully charge both the transmitter (TX) and receiver (RX) units using the provided Micro USB charging cable. The charging port is located on the side of each unit. A full charge typically takes approximately 1.5 hours and provides up to 4 hours of operation.

Image: The Micro USB charging port and the single button for powering on the device.

2. ஆன் மற்றும் இணைத்தல்:

1. Press and hold the power button on both the TX and RX units for a few seconds to turn them on.
2. The units will automatically attempt to pair. Once successfully paired, the signal indicator light on the receiver will change from blue to cyan.
3. If pairing fails, ensure both units are charged and within range, then try again.

3. உங்கள் சாதனத்துடன் இணைத்தல்:

• ஸ்மார்ட்போன்கள்/டேப்லெட்டுகளுக்கு: Use the provided TRRS (3-ring) smartphone cable. Connect one end to the receiver's audio output interface and the other end to your smartphone's 3.5mm audio jack. (Note: Newer iPhones may require a Lightning to 3.5mm adapter, and some Android phones may require a USB-C to 3.5mm adapter, not included).
• For Cameras/Camcorders: Use the provided TRS (2-ring) camera cable. Connect one end to the receiver's audio output interface and the other end to your camera's microphone input jack.

Image: Visual representation of the wide compatibility of the LENSGO 318C with different recording devices.

4. மைக்ரோஃபோனை இணைத்தல்:

The transmitter unit can be attached to clothing using the magnetic clip or the microphone collar clip. For optimal audio quality, position the microphone approximately 6-8 inches (15-20 cm) from the speaker's mouth. If using the external lavalier microphone, plug it into the external microphone port on the transmitter. The built-in microphone will automatically deactivate when an external microphone is connected.

Image: The LENSGO 318C transmitter clipped to a person's shirt, with the external lavalier microphone attached.

இயக்க வழிமுறைகள்

சேனல் தேர்வு:

The LENSGO 318C features 20 UHF selectable channels. If you experience interference, you can change the operating frequency. To do this, simply press the power/frequency selection button on the transmitter unit. The receiver will automatically match the new frequency. It is recommended to select a channel with the least interference for optimal audio quality.

ஆடியோ கண்காணிப்பு:

Some recording devices allow for real-time audio monitoring through their headphone jack. If your device supports this, connect headphones to monitor the audio being captured by the microphone. This helps ensure proper levels and sound quality during recording.

பதிவு:

Once the microphone system is set up and connected to your recording device, begin recording as you normally would with your camera, smartphone, or camcorder. Ensure the microphone input is selected on your device if applicable.

படம்: Examples of the LENSGO 318C in use for different recording applications.

பராமரிப்பு

• சுத்தம்: Use a soft, dry cloth to clean the microphone units. Avoid using liquids or abrasive cleaners.
• சேமிப்பு: Store the microphone system in the provided storage bag in a cool, dry place when not in use.
• பேட்டரி பராமரிப்பு: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in constant use.
• விண்ட்ஸ்கிரீன்: Use the windproof fur (windscreen) when recording outdoors to minimize wind noise.

சரிசெய்தல்

• ஒலி இல்லை/குறைந்த ஒலி அளவு:
  • Ensure both TX and RX units are powered on and successfully paired (receiver light is cyan).
  • Check that cables are securely connected to both the receiver and your recording device.
  • Verify that the correct cable (TRS for camera, TRRS for smartphone) is being used.
  • Adjust the microphone input level on your recording device.
  • Ensure the external lavalier microphone is fully plugged into the transmitter if used.
• குறுக்கீடு/மோசமான ஆடியோ தரம்:
  • Change the operating channel by pressing the power/frequency selection button on the transmitter.
  • Ensure the transmitter and receiver are within the optimal operating range (within 20 meters / 65.6 ft for best results).
  • Avoid obstacles between the transmitter and receiver that might block the signal.
  • Minimize proximity to other wireless devices that might cause interference.
• Units Not Powering On/Charging:
  • Ensure the USB charging cable is properly connected to a power source and the units.
  • வேறு USB சார்ஜிங் கேபிள் அல்லது பவர் அடாப்டரை முயற்சிக்கவும்.
  • If a unit is unresponsive, use the provided card pin to press the reset button (Insurance key) on the unit.

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

LENSGO provides comprehensive after-sales support for the 318C Wireless Lavalier Microphone system.

• பதில் நேரம்: Customer inquiries are typically responded to within 24 hours.
• திரும்பும் கொள்கை: 60-day worry-free return period.
• மாற்று: வாங்கிய 12 மாதங்களுக்குள் மாற்று கிடைக்கும்.
• தொழில்நுட்ப ஆதரவு: Lifetime after-sales consultation and technical support are provided.

For any questions or assistance, please contact LENSGO customer service.

Image: LENSGO customer service commitment details.