True Manufacturing GDM-72-HC~TSL01 Glass Door Merchandiser Instruction Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

The True Manufacturing GDM-72-HC~TSL01 is a commercial glass door merchandiser designed for displaying and refrigerating packaged food and beverages. This unit features an oversized refrigeration system for optimal product temperatures and energy efficiency. It is constructed with high-quality materials for durability and an attractive presentation.

முக்கிய அம்சங்கள் அடங்கும்:

• High capacity, factory balanced refrigeration system.
• வெப்பநிலை வரம்பு: 33°F முதல் 38°F (0.5°C முதல் 3.3°C வரை).
• Non-peel or chip black powder coated cold rolled steel exterior.
• White aluminum interior with stainless steel floor.
• Double pane thermal insulated glass sliding doors.
• Adjustable heavy-duty PVC coated wire shelves.
• LED interior lighting for enhanced product visibility.
• Easily accessible condenser coil for cleaning.

படம் 1: முன் view of the True Manufacturing GDM-72-HC~TSL01 Glass Door Merchandiser.

2. அமைவு மற்றும் நிறுவல்

2.1 பேக்கிங்

Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer. Retain all packaging materials for inspection.

2.2 வேலை வாய்ப்பு

This unit is designed for freestanding installation. Ensure the merchandiser is placed on a level, sturdy surface capable of supporting its weight when fully loaded. Allow adequate clearance around the unit for proper ventilation and maintenance. The product dimensions are approximately 28.88 x 78.13 x 78.63 inches (W x D x H).

2.3 மின் இணைப்பு

The merchandiser requires a dedicated 115/60/1 electrical supply with a NEMA-5-15R receptacle. Ensure the electrical supply matches the unit's requirements and that a qualified electrician performs the connection if necessary. Do not use extension cords.

2.4 Shelving Installation

The unit comes with adjustable heavy-duty PVC coated wire shelves. Install the shelves by placing them on the shelf clips provided. Adjust the shelf height as needed to accommodate various product sizes. Ensure shelves are level and securely seated.

2.5 கதவு செயல்பாடு

The merchandiser features double pane thermal insulated glass sliding doors. Ensure the doors slide smoothly and seal properly when closed to maintain optimal internal temperature.

3. இயக்க வழிமுறைகள்

3.1 ஆரம்ப தொடக்க

After connecting the unit to power, allow it to run for several hours to reach the desired operating temperature before loading products. The factory-set temperature range is typically 33°F to 38°F (0.5°C to 3.3°C).

3.2 வெப்பநிலை கட்டுப்பாடு

The merchandiser is equipped with a temperature control system. Refer to the control panel for specific instructions on adjusting the temperature settings. Maintain the recommended temperature range for optimal product preservation.

3.3 Loading Product

Load products evenly on the shelves. Do not block the internal air vents, as this can impede airflow and affect cooling performance. Avoid overloading shelves to prevent damage and ensure proper air circulation.

3.4 உட்புற விளக்குகள்

The unit features LED interior lighting to illuminate products. The lighting can typically be controlled via a switch, allowing for enhanced product visibility.

4. பராமரிப்பு

Regular maintenance ensures the longevity and efficient operation of your merchandiser.

4.1 வெளிப்புறம் மற்றும் உட்புறத்தை சுத்தம் செய்தல்

• வெளிப்புறம்: Clean the exterior surfaces with a mild soap and water solution. Wipe dry with a soft cloth. Avoid abrasive cleaners.
• உட்புறம்: Remove all products and shelves. Clean the interior with a mild, food-safe cleaning solution. Rinse thoroughly and dry before replacing products.
• கண்ணாடி கதவுகள்: Use a glass cleaner for the doors. Avoid spraying directly onto the seals.

4.2 கண்டன்சர் சுருள் சுத்தம் செய்தல்

The condenser coil should be cleaned regularly to maintain optimal cooling efficiency and prevent compressor strain. The unit features an easily accessible condenser coil. Refer to the technical diagrams for location and access. Use a brush or vacuum cleaner to remove dust and debris from the coil fins.

4.3 பனி நீக்க அமைப்பு

This merchandiser is equipped with an automatic defrost system. No manual defrosting is typically required. Ensure the drain pan is clear and free of obstructions.

5. சரிசெய்தல்

சேவையைத் தொடர்புகொள்வதற்கு முன், மீண்டும்view பின்வரும் பொதுவான சிக்கல்கள் மற்றும் தீர்வுகள்:

• அலகு குளிர்விக்கவில்லை: Check if the power cord is securely plugged in. Verify the circuit breaker has not tripped. Ensure the temperature control is set correctly. Clean the condenser coil if it is dirty.
• அதிக சத்தம்: Check if the unit is level. Ensure no objects are vibrating against the unit. Verify fan blades are not obstructed.
• தரையில் தண்ணீர்: Check if the drain line is clogged or disconnected. Ensure the unit is level.
• Doors Not Sealing Properly: Inspect door gaskets for damage or debris. Ensure shelves are not obstructing door closure.

இந்த தீர்வுகளை முயற்சித்த பிறகும் சிக்கல்கள் தொடர்ந்தால், தகுதிவாய்ந்த சேவை பணியாளர்களைத் தொடர்பு கொள்ளவும்.

6. விவரக்குறிப்புகள்

Figure 2: Technical specifications and dimensions.

Figure 3: Detailed technical drawing and warranty information.

7. உத்தரவாதத் தகவல்

The True Manufacturing GDM-72-HC~TSL01 comes with a மூன்று வருட உத்தரவாதம் on all parts and labor. Additionally, an additional two-year warranty is provided specifically for the compressor. This warranty covers defects in materials and workmanship under normal use and service.

For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official True Manufacturing webதளம்.

8. வாடிக்கையாளர் ஆதரவு

For technical assistance, parts, or service inquiries, please contact True Manufacturing customer support. When contacting support, please have your model number (GDM-72-HC~TSL01) and serial number readily available.

You can find more information and contact details on the official True Manufacturing webதளம்: www.truemfg.com