Lorex 4K 16-Channel NVR User Manual

1. அறிமுகம்

The Lorex 4K 16-Channel NVR (Network Video Recorder) is a sophisticated surveillance solution designed to capture and manage high-resolution video footage. This NVR supports up to 4K (8MP) resolution recording, ensuring detailed and clear video evidence. It features smart motion detection, voice control capabilities, and fusion technology for enhanced security monitoring.

Equipped with a built-in Hard Disk Drive (HDD) and supporting up to two 10TB drives, the NVR provides ample storage for 24/7 recording. Its plug-and-play Power-over-Ethernet (PoE) installation simplifies camera connections, making setup efficient. The system also supports audio recording on every channel and includes an auto-recovery feature to ensure continuous surveillance even after power interruptions.

படம் 1.1: முன் view of the Lorex 4K 16-Channel NVR, showcasinஅதன் நேர்த்தியான வடிவமைப்பு மற்றும் முன் பலகை கட்டுப்பாடுகள்.

2. அமைவு மற்றும் நிறுவல்

This section guides you through the initial setup and physical installation of your Lorex NVR system. Ensure all components are present before beginning.

2.1 பிரித்தெடுத்தல் மற்றும் கூறு சரிபார்ப்பு

Carefully unpack the NVR and all accessories. Verify that the following items are included:

• Lorex 4K 16-Channel NVR unit
• பவர் அடாப்டர்
• USB மவுஸ்
• ஈதர்நெட் கேபிள்
• HDMI கேபிள்
• விரைவு தொடக்க வழிகாட்டி (பொருந்தினால்)

2.2 என்விஆரை இணைக்கிறது

Follow these steps to connect your NVR:

1. ஒரு காட்சியுடன் இணைக்கவும்: Use the provided HDMI cable to connect the NVR's HDMI output port to an HDMI input on your monitor or TV. This is essential for initial setup and direct viewing.
2. USB மவுஸை இணைக்கவும்: NVR-இல் (முன் அல்லது பின்புறம்) கிடைக்கும் எந்த USB போர்ட்டிலும் USB மவுஸைச் செருகவும்.
3. பிணைய இணைப்பு: Connect one end of the Ethernet cable to the NVR's LAN port and the other end to your router or network switch. This provides network access for remote viewing and updates.
4. Connect Cameras (PoE): For Lorex PoE cameras, connect them directly to the NVR's PoE ports using Ethernet cables. The NVR will provide both power and video signal through these ports, simplifying wiring. The NVR features 16 PoE ports.
5. பவர் ஆன்: Connect the power adapter to the NVR's power input and then plug it into a power outlet. The NVR will power on automatically.

Figure 2.1: Rear panel of the NVR, illustrating the various input/output ports including HDMI, VGA, Ethernet (LAN and PoE), USB, and audio connections.

Figure 2.2: Diagram illustrating the simplicity of Power over Ethernet (PoE) connectivity, where a single Ethernet cable provides both power and data to the camera from the NVR.

3. ஆபரேஷன்

This section covers the basic operation of your Lorex NVR, including live viewing, recording, and playback.

3.1 தொடக்க அமைவு வழிகாட்டி

Upon first power-on, the NVR will guide you through an initial setup wizard. This wizard typically includes:

• மொழி தேர்வு
• Password creation for the admin account
• தேதி மற்றும் நேர அமைப்புகள்
• Network configuration (DHCP is usually default)
• Hard drive initialization (if prompted)

3.2 நேரலை View

After completing the setup wizard, the NVR will display the live view of all connected cameras. You can switch between single-camera view, multi-camera grids, and sequence views using the on-screen controls or the USB mouse.

• 4K தெளிவுத்திறன்: The NVR supports live viewing in up to 4K (8MP) resolution at 30 frames per second (fps) for compatible cameras.
• டிஜிட்டல் ஜூம்: Use the digital zoom feature to magnify specific areas of interest in the live view.
• ஆடியோ கண்காணிப்பு: The NVR supports audio on every channel, allowing you to hear audio from cameras with built-in microphones or connected external microphones.

3.3 ரெக்கார்டிங் மற்றும் பிளேபேக்

The NVR is configured for 24/7 continuous recording by default. It also supports event-based recording triggered by motion detection.

• ஸ்மார்ட் மோஷன் கண்டறிதல்: Leverage advanced motion detection features to reduce false alerts and trigger recordings only when a person or vehicle is detected.
• Area Search: Utilize the Area Search function to quickly locate events by pinpointing activity in specific zones during playback.
• பின்னணி: பதிவு செய்யப்பட்ட foo ஐ அணுகவும்tage through the playback menu. You can search by date, time, and event type.
• சேமிப்பு: The NVR comes with a built-in 4TB HDD and supports up to two 10TB hard drives for extensive storage capacity. Storage mirroring can be configured for continuous data backup.

3.4 Remote Access (Lorex Cloud App)

The Lorex Cloud app allows you to view வாழ்க footage, play back recordings, and receive motion push notifications on your smartphone or tablet. Download the app from your device's app store and follow the in-app instructions to add your NVR.

4. பராமரிப்பு

Proper maintenance ensures the longevity and optimal performance of your Lorex NVR system.

4.1 பொது பராமரிப்பு

• அதிக வெப்பமடைவதைத் தடுக்க NVR-ஐ நன்கு காற்றோட்டமான இடத்தில் வைக்கவும்.
• Avoid exposing the NVR to direct sunlight, moisture, or extreme temperatures.
• Clean the exterior of the NVR with a soft, dry cloth. Do not use liquid cleaners or aerosols.

4.2 ஹார்டு டிரைவ் மேலாண்மை

The NVR's hard drive will automatically overwrite the oldest footage once it reaches full capacity. No manual intervention is typically required for continuous recording.

• திறன்: The NVR supports up to two 10TB hard drives. If you wish to expand storage, consult the Lorex support website for compatible drives and installation instructions.
• தரவு காப்புப்பிரதி: முக்கியமான foo க்குtage, regularly back up important video clips to an external USB drive or network storage.

4.3 நிலைபொருள் புதுப்பிப்புகள்

Periodically check the Lorex support website for firmware updates. Firmware updates can improve system performance, add new features, and address security vulnerabilities. Follow the instructions provided with the firmware update carefully.

4.4 மின் செயலிழப்பு மீட்பு

The NVR features auto-recovery after power failures. In the event of a power outage, the system is designed to automatically reboot and resume recording once power is restored, ensuring minimal disruption to your surveillance.

5. சரிசெய்தல்

This section provides solutions to common issues you might encounter with your Lorex NVR.

5.1 No Video Output on Display

• கேபிள்களை சரிபார்க்கவும்: Ensure the HDMI or VGA cable is securely connected to both the NVR and the display. Try a different cable or display if possible.
• Display Input: Verify that your monitor or TV is set to the correct input source (e.g., HDMI 1, VGA).
• NVR Power: Confirm the NVR is powered on and its power indicator light is active.
• தெளிவுத்திறன் இணக்கத்தன்மை: If the display supports lower resolutions, try connecting the NVR to a different display or consult the NVR's manual for instructions on changing output resolution (if accessible).

5.2 கேமராக்கள் காட்டப்படவில்லை

• பவர் ஓவர் ஈதர்நெட் (PoE): Ensure cameras are properly connected to the NVR's PoE ports. Check if the PoE port indicator lights on the NVR are active for the connected cameras.
• கேபிள் ஒருமைப்பாடு: Inspect Ethernet cables for any damage. Try swapping cables or ports.
• இணக்கத்தன்மை: This NVR is designed for use with Lorex IP cameras. Compatibility with third-party cameras is not guaranteed.
• Camera Power Cycle: Disconnect and reconnect the camera's Ethernet cable to power cycle it.

5.3 தொலைநிலை Viewing Issues (Lorex Cloud App)

• பிணைய இணைப்பு: Ensure the NVR is connected to the internet via its LAN port and your router. Verify your mobile device has a stable internet connection.
• NVR Online Status: Check the NVR's network settings to confirm it has obtained an IP address and is showing as "online" or "connected" to the Lorex Cloud service.
• Substream for Remote Viewing: For optimal performance over mobile networks or slower internet connections, the Lorex Cloud app often defaults to a lower-resolution substream. This is normal behavior to ensure smooth streaming. Full 4K resolution is typically best viewed directly from the NVR's HDMI output.
• திசைவி அமைப்புகள்: Ensure your router is not blocking necessary ports for the NVR's cloud connection. Consult your router's manual or ISP for port forwarding information if needed, though Lorex Cloud usually uses P2P for simpler setup.
• Wi-Fi Extenders/Mesh Networks: Some network configurations, particularly those using Wi-Fi extenders or mesh networks that suppress broadcast packets, may interfere with the NVR's ability to communicate with cameras or the cloud service. Ensure the NVR and cameras are on the same logical network segment.

5.4 Hard Drive Not Recording

• HDD நிலை: Check the NVR's system settings to verify the hard drive status. It should be "Normal" or "Initialized". If not, you may need to format or initialize the HDD.
• பதிவு அட்டவணை: Ensure the recording schedule is properly configured for continuous or motion-triggered recording.
• HDD Fault: If the hard drive is faulty, it may need replacement. Contact Lorex support for assistance.

6. விவரக்குறிப்புகள்

Detailed technical specifications for the Lorex 4K 16-Channel NVR (Model N882A64B).

7. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or further assistance with your Lorex NVR, please refer to the official Lorex website or contact their customer service directly. Keep your purchase receipt and product serial number handy for faster service.

You can also find additional resources, FAQs, and software downloads on the Lorex support portal.

ஆன்லைன் ஆதாரங்கள்:

• லோரெக்ஸ் அதிகாரி Webதளம்: www.lorex.com
• Lorex Cloud App: Available on iOS App Store and Google Play Store.