Intel NUC11BTMi9

இன்டெல் NUC 11 எக்ஸ்ட்ரீம் கிட் NUC11BTMi9 கேமிங் பேர்போன் சிஸ்டம் பயனர் கையேடு

மாதிரி: NUC11BTMi9 | பிராண்ட்: இன்டெல்

தயாரிப்பு முடிந்துவிட்டதுview

The Intel NUC 11 Extreme Kit (NUC11BTMi9) is a high-performance barebone mini PC designed for gaming and demanding applications. It offers uncompromised performance within a compact form factor, allowing users to customize it with their preferred RAM, storage, and operating system.

Intel NUC 11 Extreme Kit front angled view with RGB skull logo

படம் 1: முன் கோணம் view of the Intel NUC 11 Extreme Kit, showcasing its compact design and the illuminated skull logo.

தொகுப்பு உள்ளடக்கங்கள்

அமைப்பைத் தொடர்வதற்கு முன், அனைத்து பொருட்களும் தொகுப்பில் உள்ளதா என்பதைச் சரிபார்க்கவும்:

  • Intel NUC 11 Extreme Kit (NUC11BTMi9) Barebone System
  • அமெரிக்க பவர் கார்ட்
  • ஆவணங்கள் (விரைவு தொடக்க வழிகாட்டி, பாதுகாப்பு தகவல்)

Note: Additional components such as RAM, storage drives, and operating system are sold separately and are required for full system functionality.

அமைவு வழிகாட்டி

This section outlines the steps required to set up your Intel NUC 11 Extreme Kit. As a barebone system, it requires the installation of memory (RAM) and storage (SSD) before initial use.

1. நினைவகத்தை (RAM) நிறுவுதல்

  1. Unscrew and remove the top cover of the NUC chassis.
  2. மதர்போர்டில் DDR4 SO-DIMM ஸ்லாட்டுகளைக் கண்டறியவும்.
  3. SO-DIMM தொகுதியில் உள்ள நாட்ச்சை ஸ்லாட்டில் உள்ள நாட்ச்சுடன் சீரமைக்கவும்.
  4. Insert the module at a 45-degree angle and press down firmly until the retaining clips snap into place.
  5. பொருந்தினால் கூடுதல் நினைவக தொகுதிகளுக்கு மீண்டும் செய்யவும்.

2. Installing Storage (SSD)

The NUC 11 Extreme Kit supports M.2 NVMe SSDs.

  1. Locate the M.2 slots on the motherboard.
  2. M.2 SSD-ஐ ஸ்லாட்டில் ஒரு கோணத்தில் செருகவும்.
  3. SSD-யை மெதுவாக கீழே தள்ளி, கொடுக்கப்பட்டுள்ள திருகு மூலம் அதைப் பாதுகாக்கவும்.
  4. The system also supports Serial ATA/600 interface for additional storage options.

3. பெரிஃபெரல்களை இணைக்கிறது

Connect your monitor, keyboard, mouse, and other peripherals to the appropriate ports. The system features 12 USB ports for extensive connectivity.

Intel NUC 11 Extreme Kit rear view showing various ports

படம் 2: பின்புறம் view of the Intel NUC 11 Extreme Kit, highlighting the array of input/output ports for connecting external devices.

  • காட்சி: Connect your monitor using HDMI or DisplayPort.
  • USB சாதனங்கள்: Use the available USB ports for keyboard, mouse, external drives, etc.
  • நெட்வொர்க்: Connect an Ethernet cable for wired network access, or use the integrated Wi-Fi.
  • ஆடியோ: ஸ்பீக்கர்கள் அல்லது ஹெட்ஃபோன்களை ஆடியோ ஜாக்குகளுடன் இணைக்கவும்.

4. மின் இணைப்பு

Connect the provided power cord to the NUC and then to a power outlet.

5. இயக்க முறைமை நிறுவல்

Once RAM and storage are installed, you will need to install an operating system (e.g., Windows 10, Linux) from a bootable USB drive or disc.

இயக்க வழிமுறைகள்

This section provides basic instructions for operating your Intel NUC 11 Extreme Kit.

ஆன்/ஆஃப்

  • பவர் ஆன்: Press the power button located on the front of the unit. The power indicator light will illuminate.
  • பவர் ஆஃப்:
    • நிலையான பணிநிறுத்தம்: இயக்க முறைமையின் பணிநிறுத்தம் செயல்பாட்டைப் பயன்படுத்தவும்.
    • கட்டாய பணிநிறுத்தம்: Press and hold the power button for 5-10 seconds until the unit powers off. Use this only as a last resort.
Intel NUC 11 Extreme Kit front view with illuminated skull logo and power button

படம் 3: முன் view of the Intel NUC 11 Extreme Kit, showing the power button and front panel connectivity options.

USB சாதனங்களை இணைக்கிறது

The NUC 11 Extreme Kit offers numerous USB ports (up to 12) for connecting various peripherals. Devices can be connected or disconnected without needing to shut down the system.

பயாஸ்/யுஇஎஃப்ஐ அணுகல்

To access the BIOS/UEFI settings, power on the system and repeatedly press the F2 key during startup. This allows configuration of boot order, system settings, and hardware diagnostics.

பராமரிப்பு

Proper maintenance ensures the longevity and optimal performance of your Intel NUC 11 Extreme Kit.

  • சுத்தம்: Regularly clean the exterior with a soft, dry cloth. Use compressed air to clear dust from vents and fan areas to ensure proper airflow and prevent overheating. Ensure the system is powered off and unplugged before cleaning.
  • மென்பொருள் புதுப்பிப்புகள்: Keep your operating system, drivers, and BIOS/UEFI firmware updated to the latest versions. Visit the official Intel support website for driver downloads specific to the NUC11BTMi9 model.
  • காற்றோட்டம்: Ensure the NUC is placed in a well-ventilated area, away from direct sunlight or heat sources. Do not block the ventilation openings.
  • தரவு காப்புப்பிரதி: தரவு இழப்பைத் தடுக்க, முக்கியமான தரவை வெளிப்புற இயக்கி அல்லது கிளவுட் சேமிப்பகத்தில் தொடர்ந்து காப்புப் பிரதி எடுக்கவும்.

சரிசெய்தல்

This section provides solutions to common issues you might encounter with your Intel NUC 11 Extreme Kit.

No Power / System Does Not Turn On

  • Ensure the power cord is securely connected to both the NUC and a working power outlet.
  • மற்றொரு சாதனத்தை இணைப்பதன் மூலம் மின் நிலையம் செயல்படுகிறதா என்பதை சரிபார்க்கவும்.
  • If using a power strip or surge protector, ensure it is switched on.

காட்சி வெளியீடு இல்லை

  • Check that the monitor is powered on and the video cable (HDMI/DisplayPort) is securely connected to both the NUC and the monitor.
  • வேறு வீடியோ கேபிள் அல்லது மானிட்டரை முயற்சித்துப் பாருங்கள்.
  • Ensure RAM modules are properly seated in their slots. Reseat them if necessary.

System Freezes or Crashes

  • Ensure the system has adequate ventilation and is not overheating.
  • Update your operating system and device drivers to the latest versions.
  • Run a memory diagnostic tool to check for RAM issues.
  • Check the health of your storage drive.

புறவழி கண்டறியப்படவில்லை

  • புறச் சாதனத்தை வேறு USB போர்ட்டுடன் இணைக்க முயற்சிக்கவும்.
  • Ensure the peripheral's drivers are installed and up to date.
  • கணினியை மறுதொடக்கம் செய்யுங்கள்.

தொழில்நுட்ப விவரக்குறிப்புகள்

Below are the key technical specifications for the Intel NUC 11 Extreme Kit (NUC11BTMi9).

Intel NUC 11 Extreme Kit with dimensions labeled

படம் 4: பக்கம் view of the Intel NUC 11 Extreme Kit, illustrating its physical dimensions.

அம்சம் விவரக்குறிப்பு
மாதிரி எண் NUC11BTMi9
செயலி Intel Core i9-11900KB Octa-core (8 Core) @ 3.3 GHz
Memory (RAM) Type DDR4 SDRAM (Barebone - user installable)
சேமிப்பக இடைமுகம் M.2 (SSD), Serial ATA/600
கிராபிக்ஸ் கோப்ராசசர் இன்டெல் UHD கிராபிக்ஸ்
கிராபிக்ஸ் கார்டு ரேம் அளவு 8 GB (Integrated)
வயர்லெஸ் இணைப்பு புளூடூத், வைஃபை
USB போர்ட்கள் 12
Operating System (Pre-installed) None (Supports Windows 10)
பொருளின் எடை 5 பவுண்டுகள்
தொகுப்பு பரிமாணங்கள் 21.1 x 15 x 13.6 அங்குலம்
நிறம் கருப்பு
முதல் கிடைக்கும் தேதி அக்டோபர் 13, 2021

உத்தரவாதம் மற்றும் ஆதரவு

Intel provides a limited warranty for its NUC products. For detailed warranty information, technical support, driver downloads, and troubleshooting resources, please visit the official Intel support webதளம்.

You can typically find support by searching for "Intel NUC support" or by visiting Intel's Official Support Page.

When contacting support, please have your product model number (NUC11BTMi9) and serial number ready.

தொடர்புடைய ஆவணங்கள் - NUC11BTMi9

முன்view இன்டெல் NUC கிட் NUC11PAKi தொடர் பயனர் வழிகாட்டி
இன்டெல் NUC கிட் NUC11PAKi7, NUC11PAKi5 மற்றும் NUC11PAKi3 க்கான படிப்படியான நிறுவல் வழிகாட்டி. சேஸைத் திறப்பது, நினைவகம் மற்றும் சேமிப்பிடத்தை நிறுவுதல், VESA மவுண்டிங், பவர் இணைப்பு, OS நிறுவல் மற்றும் இயக்கி புதுப்பிப்புகளை உள்ளடக்கியது.
முன்view இன்டெல் தயாரிப்பு மாற்ற அறிவிப்பு 853587-00: பெட்டி செயலி புதுப்பிப்புகள்
பல்வேறு இன்டெல் கோர் மற்றும் ஜியோன் செயலிகளைப் பாதிக்கும் இன்டெல் பெட்டி செயலி கையேடுகள், ஒற்றை தொடர்பு புள்ளி (SPoC) விவரங்கள் மற்றும் சீனா RoHS இணக்க அட்டவணைகளுக்கான புதுப்பிப்புகள் தொடர்பான அறிவிப்பு.
முன்view IoT தளங்களில் 11வது தலைமுறை Intel® Core™ செயலிகளுக்கான Yocto Project*-அடிப்படையிலான BSP - வெளியீட்டு குறிப்புகள் MR8
This document provides the official release notes for the Yocto Project*-based Board Support Package (BSP) for 11th Gen Intel® Core™ Processors (Tiger Lake UP3) on IoT Platforms, featuring Kernel 5.10 and Maintenance Release 8 (MR8). It details hardware and software configurations, component release notes, known issues, and fixes relevant to developers working with Intel's IoT solutions.
முன்view Intel® NUC NUC11TN தொடர் தொழில்நுட்ப தயாரிப்பு விவரக்குறிப்பு
Intel® NUC போர்டு, கிட் மற்றும் மினி PC NUC11TN தொடர்களுக்கான விரிவான தொழில்நுட்ப விவரக்குறிப்புகள், செயலிகள், நினைவகம், கிராபிக்ஸ், சேமிப்பு மற்றும் இணைப்பு ஆகியவற்றை உள்ளடக்கியது.
முன்view 11வது தலைமுறை இன்டெல் டைகர் லேக்-எச் ஐஓடி இயங்குதளங்களுக்கான இன்டெல் யோக்டோ திட்ட பிஎஸ்பி வெளியீட்டு குறிப்புகள்
11வது தலைமுறை Intel® Core™ vPro®, Intel® Xeon® W-11000E தொடர் மற்றும் IoT இயங்குதளங்கள், Kernel 5.10 இல் Intel® Celeron® செயலிகள் (Tiger Lake-H) ஆகியவற்றிற்கான Yocto Project* அடிப்படையிலான Board Support Package (BSP) வெளியீட்டு குறிப்புகள். கூறு பதிப்புகள், அம்சங்கள், அறியப்பட்ட சிக்கல்கள் மற்றும் திருத்தங்கள் பற்றிய விவரங்கள்.
முன்view இன்டெல்® NUC வாரியம் NUC7i5BNB மற்றும் NUC7i7BNB தொழில்நுட்ப தயாரிப்பு விவரக்குறிப்பு
இந்த ஆவணம் Intel® NUC Board NUC7i5BNB மற்றும் Intel® NUC Board NUC7i7BNB ஆகியவற்றுக்கான விரிவான தொழில்நுட்ப விவரக்குறிப்புகளை வழங்குகிறது, இது பலகை அமைப்பு, கூறுகள், இணைப்பிகள், மின்சாரம் மற்றும் சுற்றுச்சூழல் தேவைகள் மற்றும் BIOS தகவல்களை உள்ளடக்கியது. இது விற்பனையாளர்கள், கணினி ஒருங்கிணைப்பாளர்கள் மற்றும் பொறியாளர்களுக்காக வடிவமைக்கப்பட்டுள்ளது.