SUNLU S1 பிளஸ் இழை உலர்த்தி பெட்டி பயனர் கையேடு

1. அறிமுகம்

The SUNLU S1 Plus Filament Dryer Box is an essential accessory for 3D printing enthusiasts and professionals. It is designed to effectively remove moisture from 3D printer filaments, which can significantly degrade print quality, leading to issues such as stringing, clogging, and poor layer adhesion. By maintaining optimal filament dryness, the S1 Plus ensures smoother surfaces, better print quality, and improved overall printing success.

Figure 1: SUNLU S1 Plus Filament Dryer Box

2. தயாரிப்பு அம்சங்கள்

• Fast Drying with Fan: Features an upgraded fan design for accelerated moisture discharge, reducing the impact of humidity on 3D printing.
• காட்சி காட்சி: Equipped with a 2-inch LCD screen that accurately displays temperature, time, and humidity.
• தனிப்பயனாக்கப்பட்ட அமைப்புகள்: Allows adjustment of drying temperature (35℃-55℃) and time (0-24 hours) to suit different filament types and environmental conditions.
• உயர் பொருந்தக்கூடிய தன்மை: Accommodates filament spools up to 210x89(H)mm, compatible with 1.75mm, 2.85mm, and 3.00mm PLA, PETG, ABS, TPU, Nylon, and PA filaments from various brands.

Figure 2: Illustration of the 360-degree hot-air circulation system for uniform heating and effective drying.

Figure 3: Visual comparison highlighting the benefits of dried filament, including smoother surfaces and better layer adhesion.

3. அமைவு வழிகாட்டி

3.1 அன்பாக்சிங் மற்றும் கூறுகள்

தொகுப்பைத் திறந்தவுடன், அனைத்து கூறுகளும் இருப்பதை உறுதிசெய்து கொள்ளுங்கள்:

• SUNLU S1 Plus Filament Dryer Box
• பவர் அடாப்டர்
• பயனர் வழிகாட்டி (இந்த வழிகாட்டி)

படம் 4: பெட்டியில் என்ன இருக்கிறது.

3.2 ஆரம்ப அமைப்பு

1. Place the SUNLU S1 Plus on a stable, flat surface.
2. Connect the power adapter to the dryer box and plug it into a power outlet.
3. Open the transparent lid of the dryer box.
4. Place your filament spool inside the dryer box. Ensure the filament unwinds smoothly.
5. மூடியை பாதுகாப்பாக மூடு.

Figure 5: Visual steps for turning on, loading filament, setting parameters, and starting printing.

4. இயக்க வழிமுறைகள்

4.1 கட்டுப்பாடுகள் மற்றும் காட்சி

The S1 Plus features a 2-inch LCD screen and two control buttons for easy operation.

Figure 6: Function Diagram of the control panel.

4.2 பவர் ஆன்/ஆஃப் மற்றும் பயன்முறை தேர்வு

1. பவர் ஆன்: Hold the left button to power on the device. The LCD screen will light up, displaying the current temperature.
2. பயன்முறையை மாற்று: Press the right button to cycle through display modes: Temperature (PV℃), Humidity (%RH), and Time (SV Time).
3. பவர் ஆஃப்: The device will automatically power off once the set drying time is complete. To manually turn off, unplug the power adapter.

4.3 வெப்பநிலை மற்றும் நேரத்தை அமைத்தல்

1. வெப்பநிலையை அமைக்கவும்: While in Temperature mode, press the left button to enter temperature setting. Use the left and right buttons to adjust the target temperature (SV℃) between 35℃ and 55℃.
2. நேரத்தை அமைக்கவும்: While in Time mode, press the left button to enter time setting. Use the left and right buttons to adjust the drying duration (SV Time) from 0 to 24 hours.
3. The device will automatically begin heating and drying once settings are confirmed.

4.4 Filament Compatibility and Recommended Settings

The S1 Plus is compatible with various filament types. Refer to the table below for recommended drying temperatures and times:

Figure 7: Recommended Drying Temperature for Filaments.

Note: These are general recommendations. Optimal settings may vary based on filament brand, age, and ambient humidity.

Figure 8: High Compatibility with 99% of 3D Filament Spools.

5. பராமரிப்பு

Regular maintenance ensures the longevity and optimal performance of your SUNLU S1 Plus Filament Dryer Box.

5.1 சுத்தம் செய்தல்

• Before cleaning, ensure the device is unplugged and completely cooled down.
• Wipe the exterior and interior surfaces with a soft, dry cloth.
• சிராய்ப்பு கிளீனர்கள் அல்லது கரைப்பான்களைப் பயன்படுத்த வேண்டாம், ஏனெனில் அவை பிளாஸ்டிக்கை சேதப்படுத்தும்.
• Ensure no liquids enter the electronic components.

5.2 சேமிப்பு

• When not in use, store the dryer box in a cool, dry place away from direct sunlight.
• It is recommended to store filament in sealed bags with desiccant after drying to prevent re-absorption of moisture.

6. சரிசெய்தல்

If you encounter issues with your 3D prints, consider the following common problems and solutions related to filament moisture:

• Stringing, Blobs, or Zits: These are common indicators of wet filament. Ensure your filament has been adequately dried using the recommended settings for its material type.
• Clogging or Extrusion Issues: Moisture can cause steam bubbles during extrusion, leading to clogs. Dry your filament thoroughly before printing.
• Poor Layer Adhesion: Wet filament can result in weaker layer bonds. Drying the filament can significantly improve print strength and adhesion.
• சத்தமில்லாத செயல்பாடு: The S1 Plus is designed for low noise operation. If you experience unusual or excessive noise, ensure the unit is on a stable surface and there are no obstructions to the fan or filament spool.

Figure 9: Low Noise Operation for a peaceful printing environment.

7. விவரக்குறிப்புகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

SUNLU provides after-sales service and technical support for the S1 Plus Filament Dryer Box. If you have any questions, require assistance, or experience issues with your product, please do not hesitate to contact SUNLU customer service.

For support, please refer to the contact information provided on the official SUNLU webதளம் அல்லது உங்கள் கொள்முதல் தளம் மூலம்.