xTool தேன்கூடு வேலை அட்டவணை வழிமுறை கையேடு

1. அறிமுகம்

The xTool Honeycomb Working Table is an essential accessory designed to enhance the performance of laser engraver and cutter machines, particularly the xTool D1 Pro and other compatible models. Its primary function is to facilitate efficient smoke evacuation, protect your work materials from scorching, and safeguard your desktop from laser damage during cutting and engraving operations. The honeycomb structure ensures optimal airflow, leading to cleaner cuts and improved overall results.

Figure 1: xTool Honeycomb Working Table with accompanying aluminum panel.

2 அமைவு

2.1. கூறுகள் முடிந்துவிட்டனview

The xTool Honeycomb Working Table set includes the following main components:

• Honeycomb Panel: Made of iron and aluminum for stability, durability, and rust resistance.
• Aluminum Panel: Provides additional protection for your desktop.
• Four Corner Protectors: Designed to prevent accidental hand injuries.

Figure 2: Key components of the Honeycomb Working Table.

2.2. நிறுவல் மற்றும் வேலை வாய்ப்பு

Proper placement of the honeycomb working table is crucial for optimal performance and safety. The aluminum panel should be placed directly on your work surface, followed by the honeycomb panel on top.

1. Ensure your laser engraver is powered off and disconnected from the power source.
2. Place the aluminum panel on your desktop or the base of your laser engraver's working area. This panel acts as a protective barrier against laser damage.
3. Carefully place the honeycomb panel on top of the aluminum panel. Ensure it is centered and stable.
4. Attach the four corner protectors to the corners of the honeycomb panel to enhance safety during handling.

Figure 3: Double protection setup with honeycomb and aluminum panel.

3. இயக்க வழிமுறைகள்

The honeycomb design is engineered to accelerate smoke evacuation during laser operations, preventing materials from blackening due to hot fumes and significantly enhancing the carving and cutting effect. The integrated precise graduations on the edges allow for easy measurement of objects.

Figure 4: Enhanced effect on materials when using the honeycomb table.

Figure 5: Large working area with precise graduations for easy measurement.

4. பராமரிப்பு

To ensure the longevity and optimal performance of your xTool Honeycomb Working Table, regular cleaning is recommended. Over time, residue from laser cutting and engraving can accumulate within the honeycomb cells. Use a soft brush or compressed air to remove debris. For stubborn residue, a damp cloth with a mild cleaning solution can be used, ensuring the table is completely dry before next use.

5. சரிசெய்தல்

5.1. Scorching on Material Backside or Desktop

If you observe burn marks or scorching on the backside of your material or on the desktop beneath the laser, it indicates insufficient airflow or lack of proper protection. The honeycomb table is designed to prevent this by allowing smoke and debris to pass through, ensuring clean cuts.

• Ensure the aluminum panel is correctly placed beneath the honeycomb table.
• Verify that the honeycomb cells are not clogged with excessive debris, which can impede airflow.
• Always use the honeycomb working table when performing cutting operations to allow proper ventilation and prevent back-burn.

6. விவரக்குறிப்புகள்

7. உத்தரவாதம் மற்றும் ஆதரவு

For any inquiries, technical assistance, or warranty claims regarding your xTool Honeycomb Working Table, please refer to the official Makeblock support channels. Makeblock offers multi-channel service including email, live chat, phone support, and a community Facebook group to assist users. A dedicated technical service team is available to provide prompt assistance.

• மின்னஞ்சல் ஆதரவு
• நேரலை அரட்டை
• தொலைபேசி ஆதரவு
• பேஸ்புக் குழு