Vividia TVS-507 Telescopic Pole Video Inspection Camera Borescope System User Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

The Vividia TVS-507 Telescopic Pole Video Inspection Camera is designed for detailed visual inspections in hard-to-reach areas. It features a strong, extendable carbon fiber pole, a high-resolution 5MP camera, and a video viewing system with DVR recording capabilities. This system is ideal for various applications including roof and building inspections, gutter cleaning, and examining areas inaccessible by direct view.

முக்கிய அம்சங்கள் அடங்கும்:

• Flexible gooseneck camera head with a Φ18mm diameter, extendable up to 5 meters (16 feet).
• 1/3 inch 5MP resolution sensor with a 90° field of view.
• 12 high-intensity white LED lights with adjustable brightness, providing visibility over 5 meters in total darkness.
• 7-inch LCD touchscreen monitor with photo and video recording functions.
• Control box with DVR controls, SD card slot (max 32GB), LED brightness adjustment, and AV/photo selection.
• High-capacity 7500mAh lithium battery for over 5 hours of continuous operation.

Figure 1: The Vividia TVS-507 Telescopic Pole Video Inspection Camera Borescope System, showing the extended pole, monitor, and camera head.

2. கணினி கூறுகள்

The Vividia TVS-507 system includes the following main components:

• தொலைநோக்கி துருவம்: Extendable carbon fiber pole for reaching elevated or distant areas.
• Waterproof Camera Head: High-resolution 5MP camera with 12 adjustable LED lights, mounted on a flexible gooseneck.
• 7-inch LCD Touchscreen Monitor: நிகழ்நேரத்திற்கு viewing, recording, and playback.
• கட்டுப்பாட்டு பெட்டி: Integrated with the monitor, featuring DVR controls, SD card slot, and power management.
• ரிச்சார்ஜபிள் லித்தியம் பேட்டரி: Provides portable power for extended operation.
• Sturdy Carry Case: For safe transport and storage of the entire system.

Figure 2: Main components of the Vividia TVS-507 system, illustrating the sunshade, camera, pole sections, and monitor.

Figure 3: Detailed structural diagram of the inspection system, highlighting the flexible camera and audio sensor.

3. அமைவு வழிகாட்டி

3.1 பிரித்தல் மற்றும் ஆரம்ப ஆய்வு

Carefully remove all components from the sturdy carry case. Inspect each part for any signs of damage. Ensure all listed components are present.

Figure 4: The system components neatly arranged within the protective carry case.

3.2 Assembling the Pole and Camera

1. Extend the telescopic pole sections by twisting and pulling them to the desired length. Secure each section by twisting in the opposite direction.
2. Attach the flexible gooseneck camera head to the top of the pole. Ensure it is securely fastened.
3. Connect the camera cable to the designated port on the control box/monitor unit.

3.3 Attaching the Monitor and Control Box

1. Mount the 7-inch LCD touchscreen monitor onto the pole using the provided bracket. Adjust the viewஉகந்த தெரிவுநிலைக்கான கோணம்.
2. Ensure all connections between the monitor, control box, and pole are firm.

Figure 5: The 7-inch LCD monitor and control panel, detailing input/output ports and control buttons.

3.4 Inserting the SD Card and Charging the Battery

1. Locate the SD card slot on the control box. Insert a compatible SD card (up to 32GB) for recording photos and videos.
2. Connect the power adapter to the control box and a power outlet to fully charge the lithium battery before first use. The charging indicator will show the battery status.

For a visual guide on assembly and basic operation, please refer to the video below. Note that this video features the TVS-500 model, but the general assembly and operational principles are similar.

காணொளி 1: முடிந்ததுview of the Vividia Telescopic Pole Inspection Camera (TVS-500 model shown), demonstrating its features and applications. This video provides a general understanding of the system's capabilities.

4. இயக்க வழிமுறைகள்

4.1 பவர் ஆன்/ஆஃப்

To power on the system, press and hold the 'Power ON/OFF' button on the control box until the LCD screen illuminates. To power off, press and hold the same button until the screen shuts down.

4.2 Adjusting Camera and Lighting

• Camera Direction: The flexible gooseneck camera head can be manually bent and adjusted to the desired viewing கோணம்.
• LED பிரகாசம்: Use the 'LED brightness adjusting knob' on the control box to increase or decrease the intensity of the camera's LED lights. This helps optimize visibility in varying light conditions.

Figure 6: The flexible camera head, which can be adjusted manually for optimal viewing.

4.3 Recording Video and Photos

The system supports both video recording and still image capture. Ensure an SD card is inserted before recording.

1. மாறுதல் முறைகள்: Use the 'AV&photo selection' button to toggle between video and photo modes.
2. வீடியோ பதிவு: In video mode, press the 'Record' button to start recording. Press it again to stop.
3. புகைப்படம் எடுத்து கொண்டு இருக்கிறேன்: In photo mode, press the 'Photo' button to capture a still image.
4. மைக்ரோஃபோன் கட்டுப்பாடு: Use the 'On/off MIC control button' to enable or disable audio recording.

Figure 7: The 7-inch LCD screen showing the live camera feed and recording status.

4.4 Playback and Data Transfer

• On-Device Playback: Use the 'Play' button and navigation controls on the control box to review recorded videos and photos directly on the monitor.
• இடமாற்றம் Files: Remove the SD card from the control box and insert it into a computer or compatible device to transfer and view your recorded media.

5. பராமரிப்பு

5.1 சுத்தம் செய்தல்

• கேமரா ஹெட்: Gently wipe the camera lens with a soft, lint-free cloth. For stubborn dirt, use a small amount of lens cleaning solution. Ensure the camera head is dry before storage.
• Monitor and Control Box: Use a dry, soft cloth to clean the monitor screen and control box. Avoid abrasive cleaners or excessive moisture.
• துருவம்: Wipe down the telescopic pole with a damp cloth to remove dirt and debris. Dry thoroughly.

5.2 சேமிப்பு

When not in use, store the Vividia TVS-507 system in its original sturdy carry case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the pole is fully retracted and all components are securely placed to prevent damage.

5.3 பேட்டரி பராமரிப்பு

To prolong battery life, fully charge the battery before long-term storage and recharge it every 3-6 months if not in regular use. Avoid completely draining the battery frequently.

6. சரிசெய்தல்

7. விவரக்குறிப்புகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please contact Vividia customer service. Details can typically be found on the product packaging or the official Vividia webதளம்.

நீங்கள் அதிகாரியையும் பார்வையிடலாம் VIVIDIA Store on Amazon மேலும் தயாரிப்பு தகவல் மற்றும் ஆதரவு வளங்களுக்கு.