GREENCUT GTC190X Petrol Tiller Instruction Manual

1. அறிமுகம்

Thank you for choosing the GREENCUT GTC190X Petrol Tiller. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new equipment. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper use and to prevent injury or damage.

The GTC190X is a powerful and efficient petrol-powered tiller designed for preparing soil in gardens and agricultural fields. It features a 161cc 4-stroke OHV engine, a working width of 56cm, and durable hardened iron blades, making it suitable for various soil types and intensive work.

2. பாதுகாப்பு தகவல்

Always prioritize safety when operating power equipment. Failure to follow safety instructions can result in serious injury or death.

• கையேட்டைப் படியுங்கள்: செயல்பாட்டிற்கு முன் அனைத்து வழிமுறைகளையும் எச்சரிக்கைகளையும் புரிந்து கொள்ளுங்கள்.
• தனிப்பட்ட பாதுகாப்பு உபகரணங்கள் (PPE): Always wear appropriate safety glasses, hearing protection, sturdy footwear, and gloves.
• எரிபொருள் கையாளுதல்: Handle petrol with extreme care. Store in approved containers, refuel in a well-ventilated area with the engine off and cool. Do not smoke while refueling.
• வேலை பகுதி: Clear the work area of stones, debris, and other objects that could be thrown by the blades. Keep bystanders, children, and pets at a safe distance (at least 15 meters).
• எஞ்சின் வெளியேற்றம்: Operate the tiller only in well-ventilated outdoor areas. Engine exhaust contains carbon monoxide, which is a colorless, odorless, and deadly gas.
• கத்தி பாதுகாப்பு: Keep hands and feet away from rotating blades. Ensure the engine is off and blades have stopped before performing any adjustments or maintenance.
• சாய்வு செயல்பாடு: Exercise extreme caution when operating on slopes. Till across the face of slopes, never up and down.
• பாதுகாப்பு பூட்டு: The tiller is equipped with a safety lock to prevent accidental starting. Always engage this lock when the machine is not in use or during maintenance.

3. தயாரிப்பு கூறுகள்

Familiarize yourself with the main components of your GREENCUT GTC190X tiller.

• இயந்திரம்: 161cc 4-stroke OHV air-cooled engine.
• Tilling Blades: Hardened iron blades for effective soil cultivation.
• சரிசெய்யக்கூடிய கைப்பிடி: Ergonomic handlebar, adaptable for various users and foldable for compact storage.
• போக்குவரத்து சக்கரம்: Front wheel for easy maneuverability.
• Depth Stake: Adjustable stake to control tilling depth.
• பாதுகாப்பு பூட்டு: Mechanism to prevent accidental starts.

படம் 3.1: ஒட்டுமொத்தமாக view of the GREENCUT GTC190X Petrol Tiller.

Figure 3.2: Detail of the hardened iron tilling blades and transport wheel.

4. அமைப்பு மற்றும் அசெம்பிளி

Follow these steps to assemble and prepare your tiller for first use.

4.1. கைப்பிடி சட்டசபை

1. Attach the lower handlebar section to the main unit using the provided bolts and nuts. Ensure a secure fit.
2. Connect the upper handlebar section to the lower section, aligning the holes and securing with the quick-release knobs or bolts.
3. Mount the control levers (throttle, clutch) to the handlebar and route the cables according to the diagrams in the separate assembly guide. Ensure cables are not pinched.

படம் 4.1: பக்கம் view of the tiller, showing the assembled handlebar.

4.2. Blade and Wheel Attachment

1. Attach the tilling blades to the axle shafts, ensuring they are oriented correctly (left and right blades). Secure them with the pins or bolts.
2. Install the transport wheel at the front of the tiller. This wheel is used for moving the tiller to and from the work area, and can be adjusted or removed during tilling.

Figure 4.2: Detail of the transport wheel and tilling tines.

4.3. Fuel and Oil

Before starting, ensure the engine has sufficient fuel and oil.

• என்ஜின் ஆயில்: Fill the engine crankcase with the recommended 4-stroke engine oil (refer to engine manual for specific type and capacity). Do not overfill.
• எரிபொருள்: Fill the fuel tank with fresh, unleaded petrol. Do not use E85 or other ethanol blends not approved for small engines.

WARNING: Never refuel a hot engine. Always allow the engine to cool down before adding fuel.

5. இயக்க வழிமுறைகள்

Learn how to safely start and operate your GREENCUT GTC190X tiller.

5.1. இயந்திரத்தைத் தொடங்குதல்

1. Ensure the tiller is on a level surface and the safety lock is disengaged.
2. Open the fuel valve (if applicable).
3. Set the choke lever to the 'CHOKE' position (for cold starts).
4. Press the primer bulb 3-5 times until fuel is visible.
5. த்ரோட்டில் லீவரை 'வேகமான' நிலைக்கு நகர்த்தவும்.
6. இயந்திரம் தொடங்கும் வரை ஸ்டார்டர் கயிற்றை உறுதியாகவும் சீராகவும் இழுக்கவும்.
7. இயந்திரம் தொடங்கியதும், இயந்திரம் வெப்பமடையும் போது சோக் லீவரை படிப்படியாக 'RUN' நிலைக்கு நகர்த்தவும்.

5.2. Tilling Operation

When tilling, hold the handlebars firmly with both hands. Allow the tiller to pull itself forward, guiding it gently. For deeper tilling, make multiple passes, gradually increasing the depth with each pass by adjusting the depth stake.

Figure 5.1: Operator using the GREENCUT GTC190X tiller to cultivate soil.

படம் 5.2: முன் view of the tiller in operation, showing the tilling action.

5.3. என்ஜினை நிறுத்துதல்

To stop the engine, move the throttle lever to the 'STOP' or 'OFF' position. If equipped, turn the engine switch to 'OFF'.

6. பராமரிப்பு

Regular maintenance ensures the longevity and optimal performance of your tiller.

6.1. ஒவ்வொரு பயன்பாட்டிற்கும் பிறகு

• Clean the tilling blades and housing of any soil, debris, or plant material.
• Inspect blades for damage or excessive wear.
• அனைத்து நட்டுகள், போல்ட்கள் மற்றும் ஃபாஸ்டென்சர்களின் இறுக்கத்தைச் சரிபார்க்கவும்.

6.2. எஞ்சின் எண்ணெய் மாற்றம்

Change the engine oil after the first 5 hours of operation, and then every 25-50 hours or annually, whichever comes first. Refer to the engine manual for detailed instructions and oil specifications.

6.3. Air Filter Cleaning/Replacement

Inspect the air filter every 10-20 hours of operation, or more frequently in dusty conditions. Clean or replace as necessary to ensure proper engine performance.

6.4. தீப்பொறி பிளக் ஆய்வு

Inspect the spark plug annually or every 50 hours. Clean or replace if fouled or worn.

6.5. சேமிப்பு

For long-term storage, drain the fuel tank or add a fuel stabilizer. Run the engine until it stops to consume all fuel in the carburetor. Clean the tiller thoroughly and store in a dry, protected area.

7. சரிசெய்தல்

இந்தப் பிரிவு நீங்கள் சந்திக்கும் பொதுவான பிரச்சினைகளுக்கான தீர்வுகளை வழங்குகிறது.

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Greencut customer support.

8. விவரக்குறிப்புகள்

Key technical specifications for the GREENCUT GTC190X Petrol Tiller.

9. உத்தரவாதம் மற்றும் ஆதரவு

Greencut products are designed for durability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official Greencut webஎந்தவொரு உத்தரவாதக் கோரிக்கைகளுக்கும் உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.

For technical assistance, spare parts, or service inquiries, please contact the seller, Beself Brands S.A., or Greencut customer support directly. Provide your model number (GTC190X) and purchase details when contacting support to ensure efficient service.

You can find more information and support resources on the official Greencut brand store: Greencut Brand Store