அஹுஜா AI-22 2x2 USB ஆடியோ இடைமுக பயனர் கையேடு

1. அறிமுகம்

The Ahuja AI-22 is a compact and versatile 2x2 USB audio interface designed for recording, playback, and various audio applications. It provides high-quality audio conversion, allowing you to connect microphones, instruments, and other audio sources to your computer for professional-grade sound capture and monitoring. This manual provides essential information for setting up, operating, and maintaining your AI-22 audio interface.

படம் 1.1: Ahuja AI-22 Audio Interface, highlighting its diverse applications including conferencing, e-teaching, podcasting, and music production.

2. தொகுப்பு உள்ளடக்கங்கள்

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.

படம் 2.1: The AI-22 package includes the audio interface, a Micro USB to USB Type A cable, and four anti-skid base feet.

• Ahuja AI-22 Audio Interface
• Micro USB Cable (USB 2.0 to USB Type A)
• Anti-Skid Base Feet (4 pieces)

3. தயாரிப்பு முடிந்துவிட்டதுview

Familiarize yourself with the front panel controls and indicators of your AI-22 audio interface.

படம் 3.1: விரிவான view of the Ahuja AI-22 front panel, illustrating all inputs, control knobs, and status indicators.

முன் பேனல் அம்சங்கள்:

• MIC/LINE Inputs (L/R): Combo XLR/TRS jacks for connecting microphones or line-level sources.
• INST Inputs: 1/4-inch TS jacks for connecting high-impedance instruments like guitars or basses.
• CLIP Indicators: Red LEDs that illuminate when the input signal is too high, indicating potential clipping. Adjust gain to prevent clipping.
• SIG Indicators: Green LEDs that illuminate when an input signal is present.
• நேரடி கண்காணிப்பு பொத்தான்: Engages direct monitoring, allowing you to hear your input signal directly from the interface with zero latency.
• அவுட்புட் நாப்: Controls the overall output level to your monitor speakers or headphones.
• +48V Indicator: Red LED indicating that +48V phantom power is active for condenser microphones.
• சக்தி காட்டி: Green LED indicating the device is powered on.
• ஹெட்ஃபோன் வெளியீடு: 1/4-inch TRS jack for connecting headphones.

4 அமைவு

4.1 கணினி தேவைகள்

• Operating System: Windows (compatible with most modern Windows versions).
• கிடைக்கும் USB போர்ட்.
• தனிப்பட்ட கணினி.

4.2 Connecting the AI-22

1. கணினியுடன் இணைக்கவும்: Use the provided Micro USB cable to connect the AI-22 to an available USB port on your computer. The POWER indicator on the front panel will illuminate.
2. இயக்கிகளை நிறுவவும் (தேவைப்பட்டால்): The AI-22 is typically a class-compliant USB audio device, meaning it should work with standard drivers built into your operating system. If your computer does not automatically recognize the device or if you experience issues, please visit the official Ahuja website for specific driver downloads or troubleshooting guides.
3. Connect Microphones/Instruments:
   • For microphones, connect via the XLR input of the MIC/LINE jacks. If using a condenser microphone, activate +48V phantom power (refer to Section 5.2).
   • For line-level sources (e.g., mixer output), connect via the TRS input of the MIC/LINE jacks.
   • For instruments (e.g., guitar, bass), connect via the INST jacks.
4. வெளியீட்டு சாதனங்களை இணைக்கவும்:
   • For monitor speakers, connect from the rear panel outputs (not explicitly shown in images, but implied by 'OUTPUT' knob).
   • For headphones, connect to the 1/4-inch TRS Headphone Output on the front panel.

5. இயக்க வழிமுறைகள்

5.1 Input Gain Adjustment

• Adjust the gain knob for each input (MIC/LINE, INST) until the SIG indicator lights up consistently during signal presence.
• Ensure the CLIP indicator does not light up, as this indicates signal distortion. If it does, reduce the gain.

5.2 பாண்டம் பவர் (+48V)

• If using a condenser microphone, press the +48V button to supply phantom power. The +48V indicator will illuminate.
• Do not activate +48V for dynamic microphones or ribbon microphones unless specifically required and supported by the microphone, as it can cause damage.

5.3 நேரடி கண்காணிப்பு

• Press the DIRECT MONITOR button to enable zero-latency monitoring of your input signals. This allows you to hear your performance without delay, which is crucial during recording.
• When direct monitoring is active, the input signal is routed directly to the outputs (headphones and main outputs) before being processed by the computer.

5.4 Output Level Control

• Use the OUTPUT knob to adjust the overall listening volume for your monitor speakers and headphones.

5.5 Common Usage Scenarios

படம் 5.1: AI-22 configured for classroom teaching, enabling recording and playback of lectures via USB connection to a computer and output to an ampஆயுள்.

படம் 5.2: AI-22 in a studio setup, connecting instruments and microphones to a computer for recording, with output to monitor speakers and headphones.

படம் 5.3: AI-22 integrated into a video conferencing system, facilitating audio input from multiple microphones and output through an ampஆயுள்.

6. பராமரிப்பு

• சுத்தம்: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners, solvents, or waxes.
• சேமிப்பு: Store the AI-22 in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• கேபிள் பராமரிப்பு: Handle USB and audio cables carefully. Avoid sharp bends or excessive pulling to prevent damage.
• காற்றோட்டம்: Ensure the unit has adequate ventilation and is not covered during operation to prevent overheating.

7. சரிசெய்தல்

If you encounter issues with your AI-22, refer to the following common problems and solutions:

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

The warranty for the Ahuja AI-22 audio interface is provided as per manufacturer terms and conditions. For detailed warranty information, technical support, or service inquiries, please visit the official Ahuja webதளம் அல்லது அவர்களின் வாடிக்கையாளர் சேவைத் துறையைத் தொடர்புகொள்ளவும்.

For the most up-to-date information and resources, please refer to the manufacturer's official webதளம்: www.ahujaradios.com