AXAGON ADSA-D25 SATA 2.5 Clone Dual SSD Dock Station - USB 3.2 Gen 1 User Manual

1. அறிமுகம்

The AXAGON ADSA-D25 is a dual dock station designed for 2.5-inch SATA Solid State Drives (SSDs) and Hard Disk Drives (HDDs). It provides a convenient solution for connecting two SATA drives to a computer via USB 3.2 Gen 1 (USB 3.0) interface, offering data transfer speeds up to 5 Gbps. Additionally, it features an offline clone function, allowing direct duplication of one drive to another without requiring a computer connection.

2. தொகுப்பு உள்ளடக்கங்கள்

கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உங்கள் தொகுப்பில் உள்ளதா என்பதை சரிபார்க்கவும்:

• AXAGON ADSA-D25 Dual SSD/HDD Dock Station
• USB Micro-B to USB-A Cable
• பவர் அடாப்டர்
• பயனர் கையேடு

Image: The ADSA-D25 dock station, showing the rear ports (USB Micro-B, power input), power button, clone button, and the included USB Micro-B to USB-A cable and power cable.

3. தயாரிப்பு முடிந்துவிட்டதுview

The ADSA-D25 dock station is designed for ease of use and efficient data management. It supports two 2.5-inch SATA SSDs or HDDs simultaneously.

படம்: முன்பக்கம் view of the AXAGON ADSA-D25 dock station with two 2.5-inch SSDs inserted into the top slots, highlighting its dual drive capability.

முக்கிய அம்சங்கள்:

• Dual 2.5" SATA Drive Support: Accommodates two 2.5-inch SATA I/II/III SSDs or HDDs.
• USB 3.2 Gen 1 Interface: Provides high-speed data transfer up to 5 Gbps.
• Offline Clone Function: Allows direct drive-to-drive cloning without a computer.
• UASP ஆதரவு: Enhances data transfer performance.
• TRIM ஆதரவு: Optimizes SSD performance and longevity.
• SMART Support: Monitors drive health and status.
• LED குறிகாட்டிகள்: Status and cloning progress indication.

Image: The ADSA-D25 dock station with graphical icons illustrating its main features: 5 Gbps USB 3.2 Gen 1 speed, support for two 2.5-inch SSDs/HDDs, and SSD/HDD duplication capability.

4 அமைவு

Follow these steps to set up your ADSA-D25 dock station:

1. பவர் இணைக்கவும்: Connect the provided power adapter to the DC 3.5mm power input port on the back of the dock station, then plug the adapter into a power outlet.
2. டிரைவ்களைச் செருகவும்: Gently insert your 2.5-inch SATA SSDs or HDDs into the top slots of the dock station. Ensure they are fully seated.
3. Connect to Computer (for Data Transfer): If you intend to use the dock for data transfer, connect the USB Micro-B end of the provided USB cable to the dock station and the USB-A end to an available USB 3.2 Gen 1 (USB 3.0) port on your computer.
4. பவர் ஆன்: Press the power button on the back of the dock station. The power LED indicator will illuminate.

5. இயக்க முறைகள்

5.1. தரவு பரிமாற்ற முறை

In this mode, the dock station functions as an external drive enclosure, allowing you to access data on the inserted drives from your computer.

1. Ensure the dock station is powered on and connected to your computer via the USB cable.
2. Insert one or two 2.5-inch SATA SSDs/HDDs into the slots.
3. Your operating system should automatically detect the drives. They will appear as removable storage devices.
4. You can now access, read, and write data to the drives as you would with any other external storage.

Image: The ADSA-D25 dock station connected to a laptop, illustrating its use for data transfer with two SSDs inserted. The image also highlights the 5 Gbps USB 3.2 Gen 1 speed compared to 480 Mbps USB 2.0.

5.2. ஆஃப்லைன் குளோன் செயல்பாடு

The offline clone function allows you to duplicate the contents of a source drive to a target drive without a computer connection. The target drive must be equal to or larger in capacity than the source drive.

Important: All data on the target drive will be erased during the cloning process. Back up any important data from the target drive before proceeding.

1. Ensure the dock station is powered off and disconnected from the computer.
2. செருகவும் மூல இயக்கி (the drive you want to copy FROM) into the Source (HDD1) ஸ்லாட்.
3. செருகவும் இலக்கு இயக்கி (the drive you want to copy TO) into the Target (HDD2) ஸ்லாட்.
4. Connect the power adapter and power on the dock station.
5. அழுத்திப் பிடிக்கவும் குளோன் பொத்தான் on the back of the dock station for approximately 3-5 seconds until the LED indicators begin to flash.
6. Release the Clone button. The cloning process will begin, and the progress will be indicated by the LEDs.
7. Once all LEDs are solid, the cloning process is complete.
8. Power off the dock station and safely remove the drives.

6. எல்.ஈ.டி குறிகாட்டிகள்

The ADSA-D25 features LED indicators to show power status, drive activity, and cloning progress.

• பவர் LED: சாதனம் இயக்கப்படும்போது ஒளிரும்.
• Drive Activity LEDs: Flash to indicate data access for each respective drive.
• Cloning Progress LEDs: During an offline clone, these LEDs indicate the percentage of completion (e.g., 25%, 50%, 75%, 100%).

Image: The ADSA-D25 dock station with its vertical LED strip, illustrating how different segments illuminate to show cloning progress (25%, 50%, 75%, 100%).

7. பராமரிப்பு

To ensure optimal performance and longevity of your ADSA-D25 dock station:

• சாதனத்தை சுத்தமான, வறண்ட சூழலில், நேரடி சூரிய ஒளி மற்றும் தீவிர வெப்பநிலையிலிருந்து விலக்கி வைக்கவும்.
• வலுவான தாக்கங்களுக்கு சாதனத்தை கைவிடுவதையோ அல்லது உட்படுத்துவதையோ தவிர்க்கவும்.
• Do not attempt to disassemble the unit. This will void the warranty.
• மென்மையான, உலர்ந்த துணியால் வெளிப்புறத்தை சுத்தம் செய்யவும். திரவ கிளீனர்களைப் பயன்படுத்த வேண்டாம்.

8. சரிசெய்தல்

8.1. Device Not Detected by Computer

• Ensure the dock station is powered on and the USB cable is securely connected to both the dock and the computer.
• உங்கள் கணினியில் வேறு USB போர்ட்டுடன் இணைக்க முயற்சிக்கவும்.
• வேறு USB கேபிள் கிடைத்தால் அதைப் பயன்படுத்தி சோதிக்கவும்.
• Verify that the inserted SSD/HDD is properly seated and functional.

8.2. Drives Not Appearing in My Computer/File எக்ஸ்ப்ளோரர்

• For new drives, they may need to be initialized, partitioned, and formatted in Disk Management (Windows) or Disk Utility (macOS) before they can be used.
• Ensure the drives are properly inserted and the dock station is powered on.

8.3. Offline Clone Fails or Does Not Start

• Ensure the dock station is disconnected from the computer before starting the clone process.
• Verify that the target drive's capacity is equal to or larger than the source drive's capacity.
• Ensure both drives are properly inserted into their respective slots (Source in HDD1, Target in HDD2).
• Press and hold the Clone button for the required duration (3-5 seconds) until the LEDs flash.
• If the issue persists, try using different drives to rule out drive-specific problems.

9. விவரக்குறிப்புகள்

Image: The underside of the ADSA-D25 dock station, revealing internal components and highlighting supported technologies such as UASP, TRIM, SMART, and compatibility with any capacity drive.

10. உத்தரவாதம் மற்றும் ஆதரவு

AXAGON products are designed and manufactured with high quality standards. For warranty information and technical support, please refer to the official AXAGON webஉங்கள் உள்ளூர் சில்லறை விற்பனையாளரைத் தொடர்பு கொள்ளவும் அல்லது உத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.