NZXT H6 Flow RGB Mid-Tower Airflow PC Case (White) - Instruction Manual

அறிமுகம்

This manual provides essential information for setting up, operating, and maintaining your NZXT H6 Flow RGB Mid-Tower Airflow PC Case. Designed for optimal thermal performance and a clean aesthetic, this compact dual-chamber case features panoramic glass panels and pre-installed RGB fans.

முக்கிய அம்சங்கள் அடங்கும்:

• Wraparound glass panels with a seamless edge for an unobstructed interior view.
• Compact dual-chamber design for improved thermal performance and a clean build.
• Three pre-installed 120mm RGB fans, angled for optimal cooling and vibrant lighting.
• Airflow-optimized perforation patterns on top and side panels for enhanced performance and dust filtration.
• Intuitive cable management system with wide channels and straps for simplified building.

அமைவு மற்றும் நிறுவல்

Follow these steps to assemble your PC within the NZXT H6 Flow RGB case.

1. வழக்கைத் தயாரித்தல்

The NZXT H6 Flow RGB case features tool-free access to its panels for easy installation and upgrades.

பக்க பேனல்களை அகற்றுதல்

The main glass side panel can be removed by applying gentle pressure to the notch at the back. The opposite steel side panel also features a notch for removal. Exercise caution when removing the steel panel as it does not sit independently once disengaged.

மேல் பேனலை நீக்குகிறது

The top mesh panel is removed by pulling up on a tab located at the back. This reveals the top fan/radiator mounting area and a magnetic dust filter.

2. மதர்போர்டு நிறுவல்

The H6 Flow RGB supports Mini-ITX, Micro-ATX, ATX, and Extended ATX motherboards. Utilize the pre-installed standoffs and cable routing cutouts for a clean installation.

3. பவர் சப்ளை நிறுவல்

The power supply unit (PSU) is mounted in a dedicated compartment behind the motherboard tray. The case supports ATX PSUs up to 180mm in length.

4. சேமிப்பக சாதன நிறுவல்

The case includes a storage bracket that supports two 2.5-inch SSDs or two 3.5-inch HDDs. This bracket is removable via a single thumbscrew for easier installation.

5. GPU நிறுவல்

The case accommodates graphics cards up to 410mm in length. An optional vertical GPU mount can be installed (sold separately).

6. மின்விசிறி மற்றும் ரேடியேட்டர் நிறுவல்

The H6 Flow RGB comes with three pre-installed 120mm RGB fans on the angled front-right panel, optimized for GPU cooling. Additional fan and radiator support is available:

• மேல்: Supports up to a 360mm radiator or three 120mm/two 140mm fans.
• பக்க: The pre-installed 120mm RGB fans are located here. This mount can also support two 140mm fans or radiators up to 360mm.
• கீழே: Supports two 120mm or two 140mm fans for intake.
• பின்புறம்: Supports one 120mm fan.

7. கேபிள் மேலாண்மை

The dual-chamber design and intuitive cable management system simplify the build process. Utilize the wide channels and included straps behind the motherboard tray to keep cables tidy and out of sight.

இயக்க வழிமுறைகள்

Once your PC is fully assembled, follow these steps to operate your system.

1. பவர் ஆன்/ஆஃப்

Locate the large power button on the top-right side of the case. Press it once to power on your system. To power off, either shut down via your operating system or press and hold the power button.

2. முன்பக்க I/O போர்ட்கள்

The front I/O panel is conveniently located at the bottom-right corner of the case, providing easy access to:

• 2 x USB 3.0 போர்ட்கள்
• 1 x USB 3.2 ஜெனரல் 2 டைப்-சி போர்ட்
• 1 x Combo Headphone/Microphone Jack

3. RGB லைட்டிங் கட்டுப்பாடு

The pre-installed RGB fans can be controlled via compatible motherboard RGB software or NZXT's CAM software, depending on your system's configuration. Refer to your motherboard manual for specific RGB header connections and software instructions.

பராமரிப்பு

வழக்கமான பராமரிப்பு உங்கள் PC கேஸின் உகந்த செயல்திறன் மற்றும் நீண்ட ஆயுளை உறுதி செய்ய உதவுகிறது.

1. தூசி வடிகட்டி சுத்தம் செய்தல்

The top panel features a magnetic dust filter that can be easily removed for cleaning. The bottom of the case also has a pull-out filter that extends the entire length of the case.

To clean, gently remove the filters and use compressed air or a soft brush to clear any accumulated dust. Reinstall once clean.

2 பொது சுத்தம்

For exterior surfaces, use a soft, damp cloth to wipe down the steel and glass panels. Avoid abrasive cleaners that could scratch the surfaces.

சரிசெய்தல்

If you encounter any issues with your NZXT H6 Flow RGB case, consider the following general troubleshooting steps:

• சக்தி சிக்கல்கள்: Ensure all power cables (PSU to motherboard, GPU, etc.) are securely connected. Verify the power supply switch is in the 'on' position.
• Fan/RGB Malfunction: Check all fan and RGB connections to the motherboard or any control hubs. Ensure relevant software (e.g., NZXT CAM, motherboard RGB software) is installed and configured correctly.
• அதிக வெப்பம்: Confirm that all fans are spinning correctly and are oriented for proper airflow (intake/exhaust). Ensure dust filters are clean and not obstructing airflow.

For more detailed troubleshooting or specific technical support, please visit the official NZXT support webதளம்.

விவரக்குறிப்புகள்

உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or to download the latest drivers and software, please visit the official NZXT website or contact their customer service directly. Product registration may be required to activate your warranty.