Wasserstein Solar Panel with Internal Battery for Blink Outdoor 3/4 Cameras

அறிமுகம்

This manual provides instructions for the installation, operation, and maintenance of your Wasserstein Solar Panel with Internal Battery. This solar panel is designed to provide continuous power to your Blink Outdoor (3rd Gen) and Blink Outdoor 4 (4th Gen) cameras, ensuring uninterrupted operation without frequent battery changes.

Image: The Wasserstein Solar Panel shown alongside two Blink Outdoor cameras, illustrating its compatibility and purpose.

தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• 1 x Solar Panel with internal battery
• 1 x 13.1ft/4m weatherproof micro USB cable
• 1 x USB C converter (for Blink Outdoor 4th Gen)
• 1 x 360-degree Mounting bracket
• 3 x Screws and Wall Anchors
• 1 x பயனர் கையேடு (இந்த ஆவணம்)

அமைவு மற்றும் நிறுவல்

Follow these steps to install your solar panel and connect it to your Blink camera:

1. ஒரு இடத்தை தேர்வு செய்யவும்: Select an outdoor location that receives several hours of direct sunlight daily. Optimal sunlight exposure is crucial for efficient charging.


Image: A solar panel mounted on an exterior wall, illustrating the importance of choosing a sunny spot for installation.

2. அடைப்புக்குறியை ஏற்றவும்: Use the provided screws and wall anchors to securely attach the 360-degree mounting bracket to your chosen surface. The bracket allows for flexible positioning to maximize sun exposure.


படம்: ஒரு பக்கம் view of the solar panel, highlighting its adjustable mounting mechanism for optimal angle setting.

3. சோலார் பேனலை இணைக்கவும்: Secure the solar panel to the mounted bracket. Adjust its angle to face the sun directly for the longest possible duration each day.
4. கேமராவுடன் இணைக்கவும்:
   • க்கு Blink Outdoor (3rd Gen): Connect the micro USB cable directly from the solar panel to your camera's power port.
   • க்கு Blink Outdoor 4 (4th Gen): Use the included USB C converter to connect the micro USB cable from the solar panel to your camera's power port.


Image: A close-up showing the solar panel connected to a Blink camera, with an inset highlighting the USB C converter for newer Blink models.

5. ஆரம்ப கட்டணம்: It is recommended to allow the solar panel to charge for at least two full days in direct sunlight before relying solely on its power. This ensures the internal battery is adequately charged.

இயக்க வழிமுறைகள்

Once installed and connected, the solar panel will automatically begin charging your Blink camera's internal battery when exposed to sunlight. The internal battery stores energy, providing power to your camera even during periods of low light or at night.

• The solar panel is designed to keep your camera powered 24/7 under normal operating conditions with sufficient sunlight.
• The 13.1ft/4m cable provides flexibility in positioning the solar panel for optimal sun exposure, even if the camera is in a shaded area.
• The system operates without requiring manual intervention after initial setup.

Image: A Blink camera mounted on a house wall, continuously powered by the Wasserstein solar panel, illustrating 24/7 operation.

பராமரிப்பு

The Wasserstein Solar Panel is built for outdoor use and requires minimal maintenance:

• சுத்தம்: சோலார் பேனலின் மேற்பரப்பை ஒரு மென்மையான, டி மூலம் அவ்வப்போது துடைக்கவும்amp cloth to remove dust, dirt, or debris that may accumulate and reduce charging efficiency. Avoid abrasive cleaners.
• வானிலை எதிர்ப்பு: The panel is weatherproof and designed to withstand various outdoor conditions. Ensure the cable connection to the camera is secure and the rubber grommet is properly seated to maintain water resistance.


Image: A solar panel shown in rainy conditions, emphasizing its weatherproof construction.

• கேபிள் ஆய்வு: Occasionally check the cable for any signs of wear or damage.

சரிசெய்தல்

If your Blink camera is not receiving power from the solar panel, consider the following:

• Insufficient Sunlight: Ensure the solar panel receives at least 4-6 hours of direct sunlight daily. Obstructions like trees, buildings, or shade can significantly reduce charging efficiency.
• கேபிள் இணைப்பு: Verify that the micro USB cable is securely connected to both the solar panel and the Blink camera. If using a USB C converter, ensure it is properly attached.
• ஆரம்ப கட்டணம்: If newly installed, the internal battery may require a full day or two of direct sunlight to build up an initial charge.
• Camera Battery Status: Check the battery status within the Blink app. The solar panel maintains the camera's battery at an "OK" status, which is equivalent to new batteries. There are no external indicators on the solar panel itself.
• தீவிர வானிலை: In prolonged periods of heavy cloud cover or extreme cold, charging efficiency may be reduced. The internal battery helps mitigate this, but continuous poor weather can eventually deplete the charge.

விவரக்குறிப்புகள்

Image: Visual representation of the solar panel's compatibility with various Blink camera models, including Blink Outdoor 4 and 3.

உத்தரவாதம் மற்றும் ஆதரவு

Wasserstein provides a 3-month warranty for this product. If you encounter any issues or have questions, please contact Wasserstein customer support for assistance.

For further support, visit the official Wasserstein webதளத்தில் அல்லது உங்கள் கொள்முதல் ஆவணங்களைப் பார்க்கவும்.