SwellPro Fisherman MAX FD2 Waterproof Fishing Drone Instruction Manual

1. தயாரிப்பு முடிந்துவிட்டதுview

The SwellPro Fisherman MAX FD2 is a high-performance waterproof fishing drone designed for delivering bait to inaccessible areas and assisting in fishing operations. It features a robust design, a 4K camera, and a dual payload release system for efficient bait deployment.

முக்கிய அம்சங்கள்:

• 7.7 lbs (3.5 kg) bait capacity
• IP67 Saltwater-proof rating
• Calibration-free operation
• No Geofencing restrictions
• Integrated 4K camera for clear visuals
• Dual Payload Release (DPL) system

Figure 1: SwellPro Fisherman MAX FD2 drone, remote controller, intelligent battery, and propellers.

2. பெட்டியில் என்ன இருக்கிறது

பெட்டியை வெளியே எடுக்கும்போது அனைத்து கூறுகளும் இருப்பதை உறுதிசெய்யவும்:

• Fisherman Max Drone (Advanced) x1
• Gimbal Camera (GC1-M) x1
• Intelligent Battery (B-FD2) x1
• Propellers (P-FD2) x2 sets
• Dual Payload Release (DPL) x1
• ரிமோட் கன்ட்ரோலர் x1
• கேரி கேஸ் x1
• Accessory Pack (includes charger, cables, etc.) x1

3. அமைவு வழிகாட்டி

Follow these steps to prepare your drone for flight.

3.1. பிரித்தல் மற்றும் ஆரம்ப அசெம்பிளி

1. Place the carry case on a flat, stable surface and open it.
2. Carefully remove the drone and accessory pack from the case.
3. Place the drone on a flat platform.
4. Install the Intelligent Battery: Align the battery slot with the pin connector inside the drone's compartment. Gently push until it clicks into place. Secure the battery by locking the four latches (numbered 1 to 4).
5. Unfold Aircraft Arms: Unfold the front arms (marked with 'F') first, then unfold the rear arms (marked with 'R'). Rotate the rings in the direction of the arrow to tighten each arm securely.
6. Remove Camera Protection: Carefully remove the protection foam from the camera gimbal.
7. Attach Propellers: Place the orange-marked propellers on the orange-marked motors and rotate the mount counter-clockwise to tighten. Place the black propellers on the black motors and rotate the mount clockwise to tighten. Ensure all propellers are firmly attached.

Video 1: Detailed guide on unpacking, battery installation, arm unfolding, and propeller attachment for the SwellPro Fisherman MAX FD2 drone.

3.2. Optional: Floating Bar Attachment

If flying close to water, attaching the floating bars is recommended for buoyancy.

1. Remove the straps on each floating bar.
2. Place each floating bar under the corresponding drone arm and lock the latches to secure them.

3.3. ரிமோட் கன்ட்ரோலர் அமைப்பு

1. ஆண்டெனா சரிசெய்தல்: Tilt down the antennas for better transmission if flying at a high altitude. Tilt up the antennas if flying close to the water surface.
2. ஃபோன் ஹோல்டர் நிறுவல்: Install the phone holder onto the remote controller by turning the screw clockwise to secure it. This is necessary if you plan to use the companion app.
3. இயக்கப்படுகிறது: Ensure all toggles on the remote controller are switched up. Short press the power button once, then long press for 2 seconds to power on the remote controller.

Figure 2: SwellPro Fisherman MAX FD2 remote controller with phone holder attached.

4. இயக்க வழிமுறைகள்

4.1. விமானத்திற்கு முந்தைய சரிபார்ப்பு பட்டியல்

Before each flight, perform the following checks:

1. Verify no damage to propellers.
2. Ensure the battery is firmly locked.
3. Confirm antennas are tightened.
4. Check that all payloads are firmly attached.
5. Ensure the sealing flap over the USB port of the remote controller is closed.
6. Verify the Micro SD card is inserted into the camera with the sealing flap closed.

4.2. அடிப்படை விமானக் கட்டுப்பாடுகள்

Familiarize yourself with the remote controller joysticks:

• இடது ஜாய்ஸ்டிக்: Controls vertical position (up/down) and yaw (left/right rotation).
• வலது ஜாய்ஸ்டிக்: Controls horizontal movement (forward/backward, left/right strafing).

Video 2: Tutorial on basic flight controls for SwellPro Fisherman drones, including vertical and horizontal movements.

4.3. Bait Release Operation

To deploy bait using the Dual Payload Release (DPL) system:

1. Attach your bait to the DPL system securely.
2. Fly the drone to the desired location.
3. Once at the target, activate the payload release switch on your remote controller.

Video 3: Demonstration of the drone airdrop system and bait release function.

4.4. வீட்டிற்குத் திரும்பு (RTH)

The Return to Home function allows the drone to automatically return to its takeoff point. Activate RTH using the designated button on your remote controller.

5. பராமரிப்பு

5.1. Post-Flight Cleaning

After each flight, especially in saltwater environments, it is crucial to clean your drone:

• Ensure the battery compartment is sealed before rinsing.
• Flush out each motor with fresh water to remove salt and sand.
• Dry the drone thoroughly with a towel or allow it to air dry completely.

5.2. பேட்டரி சார்ஜிங்

Proper battery charging ensures longevity and safe operation:

• Always charge the drone battery below 4 amps. A lower amperage setting (e.g., 2.5 amps) is recommended for battery health.
• Insert charger cables into the battery and remote as instructed by the charger's manual.
• The charger will indicate "FULL" when charging is complete.

Video 4: Instructions on how to charge the FD3 battery, applicable to Fisherman MAX FD2.

5.3. சேமிப்பு

பயன்பாட்டில் இல்லாத போது ட்ரோனை குளிர்ந்த, உலர்ந்த இடத்தில் சேமிக்கவும்.

6. சரிசெய்தல்

• ட்ரோன் இயக்கப்படவில்லை: Ensure the intelligent battery is fully charged and correctly installed with all latches secured. Check the power button sequence (short press, then long press).
• Remote controller not connecting: Verify the remote controller is powered on and fully charged. Ensure antennas are correctly positioned for optimal signal.
• Propellers not spinning: Check for any obstructions around the propellers. Ensure propellers are correctly and securely attached.
• Missing Battery Charger: If the battery charger was not included in your kit, contact SwellPro customer service or your retailer for assistance.

7. விவரக்குறிப்புகள்

8. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official SwellPRO store or contact their customer service directly.

Visit the SwellPRO Store