Memphis Audio PRX1000.1V2

Memphis Audio PRX1000.1V2 Monoblock Subwoofer Ampஆயுள் பயனர் கையேடு

Model: PRX1000.1V2

1. பாதுகாப்பு தகவல்

Please read all instructions carefully before installing and operating your Memphis Audio PRX1000.1V2 amplifier. Failure to follow these guidelines may result in damage to the amplifier, speakers, or vehicle, and may void your warranty.

2. தயாரிப்பு முடிந்துவிட்டதுview

The Memphis Audio PRX1000.1V2 is a high-performance monoblock subwoofer amplifier designed to deliver powerful and precise bass. This amplifier is engineered for efficient power delivery, enhancing low-frequency performance in your vehicle's audio system. Its robust design is optimized for driving subwoofers effectively.

Memphis Audio PRX1000.1V2 Monoblock Subwoofer Ampலிஃபையர், மேல் view

படம் 2.1: மேல் view of the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Amplifier. This image shows the sleek black casing with the illuminated Memphis logo.

2.1 முக்கிய அம்சங்கள்

2.2. தொகுப்பு உள்ளடக்கங்கள்

பிரித்தெடுத்தவுடன், அனைத்து பொருட்களும் இருப்பதை உறுதிசெய்யவும்:

3. நிறுவல் வழிகாட்டி

Proper installation is critical for the performance and longevity of your ampஏதேனும் படிகள் குறித்து உங்களுக்கு உறுதியாக தெரியவில்லை என்றால், ஒரு தொழில்முறை நிறுவியை அணுகவும்.

3.1. மவுண்டிங் இடம்

பொருத்தும் இடத்தைத் தேர்வுசெய்யவும்:

Common locations include under a seat, in the trunk, or behind a panel.

3.2. வயரிங் இணைப்புகள்

எந்தவொரு இணைப்பையும் ஏற்படுத்துவதற்கு முன், வாகனத்தின் எதிர்மறை பேட்டரி முனையத்தைத் துண்டிக்கவும்.

Memphis Audio PRX1000.1V2 Ampலிஃபையர் பவர் மற்றும் ஸ்பீக்கர் டெர்மினல்கள்

படம் 3.1: View of the power and speaker output terminals on the Memphis Audio PRX1000.1V2 amplifier. This side features connections for GND (Ground), REM (Remote Turn-On), +12V (Power), and Speaker Out.

  1. மின் இணைப்பு (+12V):

    Connect a heavy-gauge power wire (e.g., 4 AWG or larger, depending on total system power) directly from the vehicle's positive battery terminal to the +12V terminal on the amplifier. Install an appropriate fuse holder (rated for the amplifier's current draw) within 18 inches (45 cm) of the battery.

  2. தரை இணைப்பு (GND):

    Connect a heavy-gauge ground wire (same gauge as the power wire) from the GND terminal on the amplifier to a clean, solid metal point on the vehicle's chassis. Ensure the contact point is free of paint, rust, or dirt for an effective ground. The ground wire should be as short as possible, ideally less than 3 feet (1 meter).

  3. ரிமோட் டர்ன்-ஆன் (REM):

    Connect a remote turn-on wire (typically 18 AWG) from your head unit's remote output (usually a blue/white wire) to the REM terminal on the ampஇந்த கம்பி சமிக்ஞை செய்கிறது ampஉங்கள் ஹெட் யூனிட்டை ஆன் மற்றும் ஆஃப் செய்ய லிஃபையர்.

  4. Speaker Output (SPEAKER OUT):

    Connect your subwoofer(s) to the SPEAKER OUT terminals. This is a monoblock amplifier, designed for a single subwoofer or multiple subwoofers wired to present a 1-ohm load for maximum power. Ensure correct polarity (+ to + and - to -) for all speaker connections.

Memphis Audio PRX1000.1V2 Ampலிஃபையர் உள்ளீடு மற்றும் கட்டுப்பாட்டுப் பலகம்

படம் 3.2: View of the input and control panel on the Memphis Audio PRX1000.1V2 amplifier. This side includes RCA Input/Output, REM/DC/Audio switch, Input Level control, and Remote bass control port.

  1. RCA Input (INPUT):

    Connect RCA cables from your head unit's subwoofer pre-out (or full-range pre-out if no dedicated subwoofer output is available) to the RCA INPUT terminals on the ampஆயுள்.

  2. RCA Output (OUTPUT):

    The RCA OUTPUT terminals allow you to pass the audio signal to another ampபல-ampலைஃபையர் அமைப்பு.

  3. Remote Bass Control (REMOTE):

    Connect the included remote bass level control to the REMOTE port. This allows for convenient adjustment of the subwoofer level from the driver's seat.

4. இயக்க வழிமுறைகள்

4.1. ஆரம்ப பவர்-அப்

After all connections are made and verified, reconnect the vehicle's negative battery terminal. Turn on your head unit. The amplifier should power on, indicated by an illuminated logo or power indicator.

4.2. Adjusting Input Level (Gain)

The INPUT LEVEL control (often referred to as gain) matches the ampஉங்கள் ஹெட் யூனிட்டின் வெளியீட்டு நிலைக்கு லிஃபையரின் உள்ளீட்டு உணர்திறன். இது ஒரு ஒலியளவு கட்டுப்பாடு அல்ல.

  1. திருப்பு amplifier's INPUT LEVEL control to its minimum (fully counter-clockwise) setting.
  2. Set your head unit's volume to about 75-80% of its maximum level.
  3. Play a dynamic piece of music with strong bass content.
  4. Slowly increase the INPUT LEVEL control on the amplifier until you hear distortion, then back it off slightly until the sound is clean.
  5. Avoid setting the gain too high, as this can lead to clipping and damage to your subwoofers.

4.3. REM/DC/Audio Switch

This switch controls how the amplifier turns on:

For most installations with an aftermarket head unit, set this switch to REM.

4.4. Remote Bass Level Control

The remote bass control allows you to adjust the subwoofer output level conveniently from the driver's position without needing to access the ampநேரடியாக உயிரிழப்பவர்.

5. பராமரிப்பு

The Memphis Audio PRX1000.1V2 ampநீண்ட கால செயல்திறனை உறுதி செய்ய லிஃபையருக்கு குறைந்தபட்ச பராமரிப்பு தேவைப்படுகிறது.

6. சரிசெய்தல் வழிகாட்டி

உங்களுடன் பிரச்சனைகளை நீங்கள் சந்தித்தால் amplifier, refer to the following common issues and solutions before contacting technical support.

பிரச்சனைசாத்தியமான காரணம்தீர்வு
Ampலைஃபையர் இயக்கப்படவில்லை.
  • ஊதப்பட்ட உருகி (பேட்டரி அல்லது ampஆயுட்காலம்).
  • Loose or incorrect power/ground/remote connection.
  • REM/DC/Audio switch set incorrectly.
  • Faulty head unit remote output.
  • தேவைப்பட்டால் உருகிகளை சரிபார்த்து மாற்றவும்.
  • அனைத்து மின்சாரம், தரைவழி மற்றும் தொலைதூர இணைப்புகளும் பாதுகாப்பானவை மற்றும் சரியானவை என்பதைச் சரிபார்க்கவும்.
  • Ensure REM/DC/Audio switch is set to REM for standard installations.
  • Test head unit remote output with a multimeter.
ஒலிபெருக்கியில் இருந்து ஒலி இல்லை.
  • Loose or incorrect RCA input connection.
  • தளர்வான அல்லது தவறான ஸ்பீக்கர் வயர் இணைப்பு.
  • Ampலிஃபையர் ஈட்டம் மிகவும் குறைவாக அமைக்கப்பட்டுள்ளது.
  • Subwoofer damaged.
  • Check RCA cables for secure connection and integrity.
  • ஸ்பீக்கர் வயர் இணைப்புகள் மற்றும் துருவமுனைப்பைச் சரிபார்க்கவும்.
  • Adjust INPUT LEVEL (gain) control.
  • இன்னொருவருடன் ஒலிபெருக்கியைச் சோதிக்கவும் amplifier or multimeter.
சிதைந்த ஒலி.
  • Ampலிஃபையர் ஈட்டம் மிக அதிகமாக அமைக்கப்பட்டுள்ளது.
  • மோசமான தரை இணைப்பு.
  • Damaged speaker or subwoofer.
  • உள்ளீட்டு சமிக்ஞை மிக அதிகமாக உள்ளது.
  • Reduce INPUT LEVEL (gain) control.
  • Inspect and secure ground connection.
  • Check speaker/subwoofer for damage.
  • Reduce head unit volume or output level.
Amplifier overheats and shuts off.
  • போதிய காற்றோட்டம் இல்லாதது.
  • ஸ்பீக்கர் மின்மறுப்பு மிகவும் குறைவு.
  • தளர்வான இணைப்புகள்.
  • சுற்றி சரியான காற்றோட்டத்தை உறுதி செய்யுங்கள் ampஆயுள்.
  • Verify speaker wiring to ensure the load impedance is not below 1-ohm.
  • இறுக்கத்திற்கு அனைத்து இணைப்புகளையும் சரிபார்க்கவும்.

7. விவரக்குறிப்புகள்

Key technical specifications for the Memphis Audio PRX1000.1V2 Monoblock Subwoofer Ampஆயுள்:

8. உத்தரவாதம் மற்றும் ஆதரவு

8.1. உத்தரவாதத் தகவல்

The Memphis Audio PRX1000.1V2 ampலைஃபையர் ஒரு உடன் வருகிறது 1 ஆண்டு உற்பத்தியாளர் உத்தரவாதம். This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear.

For specific warranty terms and conditions, please refer to the documentation included with your product or contact Memphis Audio directly.

8.2. தொழில்நுட்ப ஆதரவு

If you encounter issues not covered in the troubleshooting section or require further assistance, please contact Memphis Audio customer support or your authorized Memphis Audio dealer. You can typically find contact information on the manufacturer's official webதளம்.

When contacting support, please have your product model number (PRX1000.1V2) and proof of purchase readily available.

தொடர்புடைய ஆவணங்கள் - PRX1000.1V2

முன்view Memphis Audio MOJO PRO Amplifiers: MJP Series Product Guide and Specifications
Comprehensive guide to Memphis Audio MOJO PRO amplifiers (MJP750.1, MJP1000.1, MJP1500.1, MJP3000.1, MJP800.4), covering features, specifications, installation, troubleshooting, and warranty information.
முன்view மெம்பிஸ் MXA100.2S & MXA200.4S பவர்ஸ்போர்ட்ஸ் மினி Ampலைஃபையர்களின் அறிவுறுத்தல் வழிகாட்டி
மெம்பிஸ் எக்ஸ்ட்ரீம் ஆடியோ MXA100.2S மற்றும் MXA200.4S பவர்ஸ்போர்ட்ஸ் மினிக்கான வழிமுறை வழிகாட்டி ampலிஃபையர்கள். அம்சங்கள், விவரக்குறிப்புகள், நிறுவல், உத்தரவாதம் மற்றும் சரிசெய்தல் ஆகியவற்றை உள்ளடக்கியது. பவர்ஸ்போர்ட்ஸ் மற்றும் கடல் பயன்பாடுகளுக்கான நீர் மற்றும் கூறுகளை எதிர்க்கும் வகையில் வடிவமைக்கப்பட்டுள்ளது.
முன்view Memphis Audio SE1000.1V2 Mono Ampஆயுள் நிறுவுதல் மற்றும் செயல்பாட்டு கையேடு
Comprehensive guide for the Memphis Audio SE1000.1V2 Street Edge mono amplifier, detailing installation, system planning, power connections, troubleshooting, and control settings for optimal car audio performance.
முன்view மெம்பிஸ் ஆடியோ SRXE12SA இயங்கும் பாஸ் சிஸ்டம் கையேடு & விவரக்குறிப்புகள்
மெம்பிஸ் ஆடியோ SRXE12SA இயங்கும் பாஸ் அமைப்பு பற்றிய விரிவான தகவல்கள், இதில் அடங்கும் ampலிஃபையர் கட்டுப்பாடுகள், நிறுவல் வழிகாட்டி, விவரக்குறிப்புகள், அம்சங்கள் மற்றும் உத்தரவாதம். உங்கள் கார் ஆடியோ சப் வூஃபரை எவ்வாறு அமைப்பது மற்றும் மேம்படுத்துவது என்பதை அறிக.
முன்view Memphis Audio MOJO MINI Subwoofer Specifications and Warranty
Detailed specifications, physical dimensions, enclosure recommendations, and limited warranty information for the Memphis Audio MOJO MINI series component subwoofers, including MJM612 and MJM812 models.
முன்view Memphis MXA300.4 300 Watt 4-Channel Ampலிஃபையர் பயனர் கையேடு மற்றும் விவரக்குறிப்புகள்
Comprehensive guide to the Memphis MXA300.4 300 Watt 4-Channel Amplifier, covering features, specifications, controls, installation, troubleshooting, and warranty information. Designed for powersports and marine use.