SingularXYZ E1 Lite GNSS RTK Surveying Equipment User Manual

1. அறிமுகம்

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your SingularXYZ E1 Lite GNSS RTK Surveying Equipment. Designed for high-precision satellite positioning, this system offers centimeter-level accuracy for various surveying applications. Please read this manual thoroughly before using the equipment to ensure optimal performance and safety.

2. என்ன சேர்க்கப்பட்டுள்ளது

Upon opening the transport case, verify that all components are present:

• E1 Lite GNSS Receiver (x2)
• Transport Case (x2)
• USB-Type C Cable (x2)
• Super Charger (x2)
• SingularPad Software (x1)
• SC200 Data Collector (x1)
• USB கேபிள் (x1)
• Super Charger (x1)
• அடைப்புக்குறி (x1)
• விரைவு தொடக்க வழிகாட்டி (x1)
• Quick Start Card (x1)
• Whip Antenna (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)

Figure 2.1: E1 Lite GNSS RTK Surveying Equipment components.

Figure 2.2: Product packaging and contents.

சிறப்பு குறிப்பு: Poles, tripods, and tribrachs are not included with this product and must be acquired separately if needed for your surveying tasks.

3. அமைவு மற்றும் ஆரம்ப இணைப்பு

3.1 சாதனங்களை சார்ஜ் செய்தல்

The E1 Lite RTK handheld GPS provides over 20 hours of continuous operation on a single charge. Use the provided Type-C chargers to fully charge both the E1 Lite GNSS Receivers and the SC200 Data Collector before initial use. Fast charging is supported.

3.2 சாதனம் முடிந்ததுview and Interfaces

Familiarize yourself with the device's front panel indicators and various connection interfaces:

Figure 3.1: Front Panel and Interfaces of the E1 Lite GNSS Receiver.

• முன் குழு: Satellite Tracking Indicator, Static & Network Indicator, Power Indicator, Function Button.
• இடைமுகங்கள்: NFC (Touch connection), Bluetooth, USB Type-C (for charging and data download), WiFi, TNC Connector (for UHF Antenna), RS232 Serial Port.

3.3 Connecting Devices via SingularPad Software

The SingularPad software is essential for controlling and configuring your E1 Lite GNSS RTK equipment. Follow these steps to connect your devices:

பொதுவான இணைப்பு படிகள்:

1. Turn on your GNSS device.
2. On the SC200 Data Collector, open the SingularPad software.
3. செல்லவும் Device >> Communication உங்கள் சாதனத்தை இணைக்க.
4. For SingularXYZ RTK Receivers (e.g., Y1 GNSS receiver): Select SingularXYZ >> RTK >> Bluetooth. தேடுங்கள் your device's Serial Number (SN) and connect.
5. For GNSS NMEA Devices (other brands): Select Other >> RTK(NMEA0183) >> Bluetooth. Search and connect the device.
6. For SingularXYZ GNSS Tablets (e.g., T8 Pro GNSS tablet): Select Other >> Internal GPS >> Internal GPS and connect the device.
7. After successful connection, you can go to Device >> Device Information செய்ய view current device information.

Figure 3.2: Setting up Rover and Base units in SingularPad.

Setting up Rover and Base (for Base + Rover mode):

1. Ensure you have two E1 Lite GNSS receivers. Designate one as the base and the other as the rover.
2. Connect both to your PDA device via Bluetooth.
3. Place both your E1 Lite base and rover in an open view வானத்தின்.
4. Connect the whip antenna to both E1 Lite base and rover.
5. Setting up the Base: Connect E1 Lite base to your PDA, go to Device >> Base. க்கு Base Startup Mode, you can input known point coordinates or select ஒற்றை புள்ளி mode for automatic setup. Set Datalink as Internal Radio, and customize radio channels, frequency, and protocol. Save settings and Start Base.
6. Setting up the Rover: Disconnect E1 Lite base and connect to the rover in the software. Go to Device >> Rover, அமைக்கப்பட்டது தரவு இணைப்பு as Internal Radio. Match and set the same protocol and frequency as the base setting. Click சேகரிப்பு to save settings and click விண்ணப்பிக்கவும்.

4. இயக்க வழிமுறைகள்

4.1 வேலை முறைகள்

The E1 Lite GNSS RTK system supports two primary working modes:

• Base + Rover Mode: Provides millimeter-level positioning. Compatible with base stations of other brands. Not subject to network and regional restrictions.
• Rover + CORS Mode: Provides centimeter-level positioning. Requires a network signal. CORS account is not included and must be purchased from your local CORS provider.

Figure 4.1: E1 Lite Working Modes.

4.2 Working with CORS/RTK Correction Service

To utilize the CORS/RTK correction service, ensure you have purchased a CORS/RTK Correction Service account in your local area. Your PDA device (phone/tablet/data collector) must have network access and support Bluetooth connection. Place your E1 Lite GNSS receiver in an open view வானத்தின்.

1. Open SingularPad software.
2. கிளிக் செய்யவும் "Communication" and connect to your E1 Lite receiver's SN via Bluetooth.
3. கிளிக் செய்யவும் கிடைக்கும் to obtain Mount-Point list and select appropriate one. Click தொடங்கு மற்றும் விண்ணப்பிக்கவும்.
4. கிளிக் செய்யவும் "Rover". அமை தரவு இணைப்பு as Phone Internet. Then go to இணைப்பு பயன்முறை and fill in your CORS/RTK Correction Service account details.

Figure 4.2: Connecting to CORS/RTK Correction Service.

4.3 Viewing RTK Positioning Status

After completing your E1 Lite RTK setup, check the current RTK solution status in the upper left corner of the SingularPad software:

• நிலையானது: E1 Lite is receiving corrections stably and obtaining a Fixed RTK solution with centimeter-level accuracy. Typically, E1 Lite achieves a Fixed RTK solution in a few seconds under good environments.
• மிதவை: E1 Lite receives corrections from the base/CORS, but due to obstructions or magnetic field interference, the signal reception is not very stable and the accuracy is sub-meter level. In tougher conditions, it may take a bit longer to achieve FIXED status.
• தன்னாட்சி: Single-point satellite positioning without receiving RTK correction data. The accuracy is around meter-level.

Figure 4.3: RTK Positioning Status Indicators.

உதவிக்குறிப்பு: Before surveying, make sure E1 Lite has a clear sky, free from obstacles like buildings, trees, cars, and more.

4.4 மேம்பட்ட அம்சங்கள்

• 60° Tilt Surveying: The E1 Lite GNSS Surveying System with IMU initializes in 5 seconds and supports tilt measurements up to 60°, compatible with regular 5/8" thread poles. This allows for surveying in challenging locations without needing perfect vertical alignment.
• 5 Kilometers UHF Range: The radio range between the rover and the base can reach 5 kilometers (3.1 miles). The E1 Lite is compatible with base stations of other brands in both Radio and CORS mode and supports RTCM v3/CMR correction data transmission.
• Robust Signal Tracking: Supports Full-Constellation Tracking (GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc.), allowing for fixed RTK solutions in seconds even in challenging environments like multipath, trees, and city canyons.
• Easy Data Download via Web UI: Access E1's WiFi to conduct static data download, firmware upgrade, and configuration via its web பக்கம்.

Figure 4.4: Advanced IMU Tilt Measurement in action.

Figure 4.5: Superior Performance in Challenging Environments.

Figure 4.6: Easy Data Download via Web பயனர் இடைமுகம்.

5. பராமரிப்பு

The E1 Lite GNSS RTK equipment is designed for durability and reliability in harsh environments. It features an IP68 மதிப்பீடு, making it waterproof, dustproof, and shock-resistant.

• சாதனத்தை ஒரு மென்மையான, டி மூலம் வழக்கமாக சுத்தம் செய்யவும்amp துணி. சிராய்ப்பு கிளீனர்களைத் தவிர்க்கவும்.
• Ensure all ports (Type-C, TNC) are free from debris and properly sealed when not in use.
• Store the equipment in its transport case when not in use to protect it from physical damage and environmental factors.
• Periodically check cables and connectors for wear and tear. Replace if damaged.

Figure 5.1: E1 Lite's Rugged Design and Battery Life.

6. சரிசெய்தல்

If you encounter issues with your E1 Lite GNSS RTK Surveying Equipment, consider the following common points:

• இணைப்புச் சிக்கல்கள்: Ensure Bluetooth is enabled on both the data collector and the receiver. Verify that the correct device type and manufacturer are selected in the SingularPad software. Try restarting both devices.
• Poor Accuracy/No Fixed Solution:
  • Ensure the receiver has a clear view of the sky, free from obstructions like buildings, dense trees, or large metal objects.
  • Check the status indicator on the device and in the SingularPad software (refer to Section 4.3).
  • Verify that the base station (if in Base+Rover mode) or CORS service (if in Rover+CORS mode) is active and providing corrections.
  • Confirm that the radio frequency and protocol settings match between the base and rover units.
• பேட்டரி ஆயுள்: Ensure devices are fully charged before use. Check the battery indicator in the SingularPad software.
• மென்பொருள் சிக்கல்கள்: Ensure your SingularPad software is up to date. Refer to the software's help section or online tutorials for specific software-related problems.

For persistent issues or problems not covered here, please contact SingularXYZ customer support for assistance. Refer to the "Support" section for contact details.

7. விவரக்குறிப்புகள்

Figure 7.1: E1 Lite RTK Key Specifications.

Figure 7.2: Lightweight and Portable Design.

8. உத்தரவாதம்

The SingularXYZ E1 Lite GNSS RTK Surveying Equipment comes with a ஒரு வருட உத்தரவாதம் from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards. Please retain your proof of purchase for warranty claims.

9. ஆதரவு மற்றும் வளங்கள்

SingularXYZ is committed to providing excellent customer support. For any inquiries, technical assistance, or service requests, please utilize the following resources:

• 1-On-1 Support Service: Direct technical support is available to assist you with any operational or technical challenges.
• பயனர் கையேடு (PDF): A comprehensive PDF version of the user manual is available for download. PDF பயனர் கையேட்டைப் பதிவிறக்கவும்
• வீடியோ டுடோரியல்கள்: Access a library of video tutorials to help you get started and master various functions of your equipment.
• மென்பொருள் மேம்படுத்தல்கள்: Enjoy permanent free software upgrades and update services for the SingularPad and Post-processing Software.
• FCC Radio License Note: U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided if needed.

For direct contact, please visit the official SingularXYZ webதளத்தில் அல்லது உங்கள் தயாரிப்பு ஆவணங்களுடன் வழங்கப்பட்ட தொடர்புத் தகவலைப் பார்க்கவும்.