1. அறிமுகம்
This manual provides essential instructions for the safe and effective operation of your GOOLOO GT4000S Jump Starter and GOOLOO GT150 Tire Inflator. Please read this manual thoroughly before use and retain it for future reference.
Image: The GOOLOO GT4000S Jump Starter (yellow and black unit with clamps) and the GOOLOO GT150 Tire Inflator (black rectangular unit with digital display).
2. முக்கியமான பாதுகாப்பு தகவல்
Always observe the following safety precautions to prevent injury or damage to the device and vehicle:
- பயன்படுத்துவதற்கு முன் அனைத்து வழிமுறைகளையும் படிக்கவும்.
- Do not operate the jump starter if the cables or clampகள் சேதமடைந்துள்ளன.
- Ensure correct polarity connection (red to positive, black to negative) to avoid sparks or damage.
- Do not jump start vehicles with battery voltagஇ 12V தவிர.
- குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.
- Do not expose to rain or extreme temperatures.
- Do not use the tire inflator for purposes other than inflating tires or compatible items.
- Avoid over-inflating tires; always check recommended PSI.
3. தயாரிப்பு முடிந்துவிட்டதுview
3.1 GOOLOO GT4000S Jump Starter
- உச்ச மின்னோட்டம்: 4000A
- எஞ்சின் இணக்கத்தன்மை: Up to 12.0L Gasoline, 10.0L Diesel
- சார்ஜ்: 100W Fast-Charging (1.2 hours for full charge, 5 minutes for a single jumpstart). Type-C port for charging.
- வெளியீடு: Up to 100W for charging MacBooks and other laptops (Type-C port only).
- பேட்டரி ஆயுள்: Up to 60 jumpstarts on a single full charge.
- இணக்கத்தன்மை: Suitable for RVs, pickup trucks, motorcycles, SUVs, tractors, boats, and other 12V vehicles.
Image: The GOOLOO GT4000S Jump Starter connected to a car battery in an engine bay, illustrating its primary function.
3.2 GOOLOO GT150 Tire Inflator
- அதிகபட்ச அழுத்தம்: 150 பி.எஸ்.ஐ
- பணவீக்க வேகம்: Inflates a completely flat 205/55 R16 car tire (0-36PSI) in approximately 7 minutes.
- அம்சங்கள்: Auto-shutoff, cordless design, portable size, ultra-bright LED screen for clear display.
- இணக்கத்தன்மை: Suitable for car tires, SUV tires, motorcycle tires, bicycle tires, balls, kayaks, and swim rings.
Image: The GOOLOO GT150 Tire Inflator connected to a car tire, demonstrating its inflation capability.
4. அமைவு மற்றும் சார்ஜிங்
4.1 Charging the GT4000S Jump Starter
- Connect the provided USB-C cable to the jump starter's Type-C input port.
- Connect the other end of the USB-C cable to a 100W fast-charging wall adapter (not included, unless specified in package contents) or a compatible car charger.
- The display will show the charging wattagஇ மற்றும் பேட்டரி சதவீதம்tage. A full charge from 0% to 100% typically takes 1.2 hours with a 100W charger.
Image: The GOOLOO GT4000S Jump Starter being charged via its USB-C port inside a vehicle, highlighting its fast-charging capability.
4.2 Charging the GT150 Tire Inflator
The GT150 Tire Inflator is charged via its USB-C port. Connect it to a compatible USB-C charger. The LED screen will indicate the charging status.
Image: The GOOLOO GT150 Tire Inflator connected to a smartphone via a USB cable, demonstrating its power bank functionality.
5. இயக்க வழிமுறைகள்
5.1 Using the GT4000S Jump Starter
- Ensure the jump starter is sufficiently charged (above 20%).
- ஜம்பர் கேபிளை இணைக்கவும்amps to the jump starter unit.
- சிவப்பு cl ஐ இணைக்கவும்amp to the positive (+) terminal of the vehicle battery and the black clamp எதிர்மறை (-) முனையத்திற்கு.
- Turn on the jump starter. The screen should display "READY" if the connection is correct and the battery is detectable.
- If the battery is completely dead or too low to detect, press the "BOOST" button for 1-2 seconds until "READY" is displayed. This forces the jump starter to provide maximum output.
- உங்கள் வாகனத்தின் எஞ்சினை 30 வினாடிகளுக்குள் ஸ்டார்ட் செய்யவும்.
- Once the vehicle starts, immediately remove the clamps from the car battery, then disconnect them from the jump starter.
Video: Official GOOLOO demonstration on how to jump start a car using a GOOLOO jump starter. This video illustrates the connection process and starting the vehicle.
5.2 Using the GT150 Tire Inflator
- Connect the air hose to the GT150 inflator and then securely attach it to the tire valve stem.
- Turn on the GT150. The LED screen will display the current tire pressure.
- Use the '+' and '-' buttons to set the desired target pressure.
- Press the power button to start inflation. The inflator will automatically stop once the target pressure is reached.
- Disconnect the air hose and store the unit.
Image: The GOOLOO GT150 Tire Inflator's LED screen showing both the real-time and preset tire pressure values, indicating its auto-shutoff feature.
6. பராமரிப்பு மற்றும் சேமிப்பு
- Store the units in a cool, dry place away from direct sunlight and moisture.
- Recharge the jump starter every 3-6 months to maintain battery health, even if not used.
- Clean the units with a dry, soft cloth. Do not use harsh chemicals.
7. சரிசெய்தல்
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Jump Starter not turning on | Low battery or faulty unit | Charge the unit fully. If issue persists, contact support. |
| "READY" not displayed (GT4000S) | Incorrect connection or battery too low | Cl ஐ சரிபார்க்கவும்amp connections. Use "BOOST" function for completely dead batteries. |
| Tire Inflator not working (GT150) | Low battery, hose not connected properly | Charge the unit. Ensure hose is securely attached to tire valve. |
8. விவரக்குறிப்புகள்
GOOLOO GT4000S ஜம்ப் ஸ்டார்டர்
- உச்சம் Ampஎரிச்சல்: 4000A
- தொகுதிtage: 12V
- பேட்டரி வகை: லித்தியம்-அயன்
- சார்ஜிங் உள்ளீடு: USB-C (100W Max)
- USB வெளியீடு: USB-C (100W Max), USB-A (various outputs)
GOOLOO GT150 Tire Inflator
- அதிகபட்ச அழுத்தம்: 150 பி.எஸ்.ஐ
- சக்தி ஆதாரம்: Cordless (Internal Battery)
- காட்சி: Ultra Bright LED Screen
9. உத்தரவாதம் மற்றும் ஆதரவு
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official GOOLOO website. Please have your model numbers (GT4000S, GT150) ready when contacting support.
