அறிமுகம்
The LAUNCH CRP129i V2.0 is an advanced automotive diagnostic scan tool designed for comprehensive vehicle system analysis. It provides diagnostic functions for Engine, Transmission, Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS), along with various reset and maintenance services. This manual provides instructions for the proper setup, operation, and maintenance of your device.
பெட்டியில் என்ன இருக்கிறது
- 1* LAUNCH CRP129I V2.0 OBD2 Scanner
- 1* OBDII Diagnostic Cable
- 1 * DC 5V Charging Cable
- 1 * பயனர் கையேடு
- 1 * Storage Pack
அமைவு
- ஆரம்ப சார்ஜிங்: Before first use, connect the device to the DC 5V Charging Cable and allow it to charge for approximately 8 hours. The device typically ships with no battery charge.
- பவர் ஆன்: சாதனத்தை இயக்க ஆற்றல் பொத்தானை அழுத்திப் பிடிக்கவும்.
- வைஃபை இணைப்பு: Follow the on-screen prompts to connect the device to a Wi-Fi network. This is necessary for software updates. Initial updates may take up to 45 minutes to download and install automatically.
- வாகன இணைப்பு: Locate your vehicle's OBDII port, usually under the dashboard on the driver's side. Connect the OBDII Diagnostic Cable from the scanner to the vehicle's OBDII port. Ensure the vehicle's ignition is in the 'ON' position (engine can be off).
இயக்க வழிமுறைகள்
The CRP129i V2.0 features a touchscreen interface and physical navigation buttons for ease of use.
1. 4-System Diagnosis (Engine, Transmission, ABS, SRS)
This tool allows for comprehensive diagnostics across four critical vehicle systems. When a warning light appears for any of these systems, the scanner can identify the root cause.
- எஞ்சின் அமைப்பு: Retrieves fault codes (DTCs) and real-time sensor data related to engine performance, fuel supply, ignition, intake, and exhaust systems.
- பரிமாற்ற அமைப்பு: Diagnoses issues related to engine power transmission to the wheels, including the transmission, clutch, and drive shafts. It can retrieve fault codes, check fluid levels, and inspect sensors.
- ABS System: Identifies problems within the anti-lock braking system, which prevents wheel lockup during emergency braking. Reads ABS-related fault codes and checks wheel speed and pressure sensors.
- SRS System: Reads and clears DTCs for the Supplemental Restraint System, addressing issues with airbags, seat belt pretensioners, and the SRS ECU.
Image: LAUNCH CRP129i V2.0 displaying diagnostic options for Engine, Transmission, ABS, and SRS systems.
Image: Screen of LAUNCH CRP129i V2.0 showing system selection menu for Powertrain Control Module, Transmission Control Module, ABS, and Restraint Control Module.
2. 12 Reset Functions
The CRP129i V2.0 offers 12 essential reset and maintenance functions. Function availability may vary by vehicle model.
- எண்ணெய் மீட்டமைப்பு: எண்ணெய் மாற்றத்திற்குப் பிறகு எண்ணெய் ஆயுள் அமைப்பை மீட்டமைக்கிறது.
- DPF மீளுருவாக்கம்: Manages Diesel Particulate Filter regeneration.
- TPMS மீட்டமைப்பு: Resets Tire Pressure Monitoring System sensors.
- ஏபிஎஸ் இரத்தப்போக்கு: Performs brake bleeding to restore ABS brake sensitivity.
- இன்ஜெக்டர் கோடிங்: புதிய இன்ஜெக்டர் எண்களை ECU-க்கு குறியீடு செய்கிறது.
- Air/Fuel Reset: Adjusts air/fuel ratio parameters.
- த்ரோட்டில் தழுவல்: Relearns throttle body position.
- BMS மீட்டமைப்பு: Resets the Battery Management System.
- SAS அளவுத்திருத்தம்: Calibrates the Steering Angle Sensor.
- EPB மீட்டமைப்பு: Resets the Electronic Parking Brake.
- AFS Headlamp மீட்டமை: Resets the Adaptive Front-lighting System.
- AdBlue Reset: Resets the urea system after maintenance.
Image: LAUNCH CRP129i V2.0 displaying 12 maintenance services.
3. Full OBD2 Functionality
The scanner supports all 10 OBD2 modes, ensuring comprehensive emissions-related diagnostics for vehicles post-1996, including OBDII, EOBD, and CAN standards.
4. Real-Time Live Data & Battery Monitoring
View real-time data streams in a 4-in-1 merged graph format, including parameters like oil temperature, speed, and tire pressure. Data can be recorded, replayed, and shared via email. The integrated battery monitoring function assesses battery health and voltagமின் நிலைகள்.
Image: LAUNCH CRP129i V2.0 displaying a real-time data stream graph.
Image: LAUNCH CRP129i V2.0 displaying a battery voltagஇ வரைபடம்.
5. Auto VIN Scan & Diagnostic Reports
The device automatically identifies your vehicle's brand, model, and year via VIN scanning. After diagnosis, detailed reports can be viewed, shared, or printed for thorough analysis.
6. FCA AutoAuth Access
For 2017 and newer FCA (Chrysler, Jeep, Dodge, Fiat) vehicles with a Secure Gateway Module (SGW), the tool supports FCA AutoAuth for diagnostics and bidirectional features.
Image: The LAUNCH CRP129i V2.0 OBD2 Scanner Diagnostic Tool.
பராமரிப்பு
- மென்பொருள் புதுப்பிப்புகள்: Regularly connect the device to Wi-Fi to download and install the latest software updates. This ensures optimal performance and compatibility with new vehicle models.
- சுத்தம்: Use a soft, dry cloth to clean the device's screen and exterior. Avoid abrasive cleaners or solvents.
- சேமிப்பு: Store the scanner in its provided storage pack in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
சரிசெய்தல்
- சாதனம் இயங்கவில்லை: Ensure the device is fully charged or connected to the vehicle's OBDII port. Check the charging cable connection.
- வாகனத்துடன் தொடர்பு இல்லை: Verify the OBDII cable is securely connected to both the scanner and the vehicle's port. Ensure the vehicle's ignition is on. Check vehicle compatibility.
- புதுப்பிப்பு சிக்கல்கள்: Ensure a stable Wi-Fi connection. If updates fail, try restarting the device and your Wi-Fi router.
- தவறான அளவீடுகள்: Ensure the vehicle's VIN is correctly identified. Consult the vehicle's service manual for expected parameter values.
விவரக்குறிப்புகள்
| அம்சம் | விவரக்குறிப்பு |
|---|---|
| மாதிரி | CRP129I V2.0 |
| இயக்க முறைமை | Android OS 8.1 |
| பொருளின் எடை | 2.27 பவுண்டுகள் |
| தொகுப்பு பரிமாணங்கள் | 9.85 x 7.17 x 3.07 அங்குலம் |
| பேட்டரிகள் | 1 லித்தியம் அயன் பேட்டரி தேவை |
உத்தரவாதம் மற்றும் ஆதரவு
LAUNCH offers a 5-year warranty against manufacturer defects. For any issues or assistance, please contact LAUNCH customer support. For immediate concerns within the initial purchase period, refer to the retailer's return policy.
