Neoteck Portable Carbon Monoxide Detector (Model NTK236) User Manual

1. அறிமுகம்

The Neoteck Portable Carbon Monoxide (CO) Detector is designed to provide real-time monitoring of CO concentration in various environments. Equipped with a high-precision sensor, visual and audible alarms, and a rechargeable battery, this device helps ensure your safety by alerting you to potentially dangerous CO levels. It is suitable for use in homes, cars, RVs, tents, and during outdoor activities like campஇங் மற்றும் கேரவன்னிங்.

2. முக்கியமான பாதுகாப்பு தகவல்

Read all instructions carefully before using this device. Failure to follow these instructions may result in property damage, injury, or death.

• Carbon Monoxide (CO) is a colorless, odorless, and tasteless gas that can be fatal. This detector is intended to detect carbon monoxide gas from any source of combustion.
• This device is not a substitute for proper ventilation and maintenance of fuel-burning appliances. Ensure all fuel-burning equipment is regularly inspected and maintained by qualified professionals.
• Do not block the sensor opening. Ensure the detector is placed in an area where air can freely circulate to the sensor.
• அலாரத்தின் போது: Immediately move to fresh air outdoors or open all doors and windows to ventilate the area. Call emergency services if symptoms of CO poisoning are present. Do not re-enter the premises until the CO source has been identified and corrected, and the area has been thoroughly ventilated.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.

3. தொகுப்பு உள்ளடக்கங்கள்

உங்கள் தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• 1 x Neoteck Portable CO Detector (Model NTK236)
• 1 x வகை-C USB சார்ஜிங் கேபிள்
• 1 x பயனர் கையேடு
• 1 x லேன்யார்டு

4. தயாரிப்பு முடிந்துவிட்டதுview

The Neoteck Portable CO Detector is a compact and lightweight device designed for easy portability and continuous carbon monoxide monitoring. It features a clear digital display, intuitive controls, and a durable design.

சாதன கூறுகள்

• டிஜிட்டல் காட்சி: Shows CO concentration in PPM, battery level, and alarm status.
• பவர் பட்டன்: சாதனத்தை இயக்க/முடக்கப் பயன்படுகிறது.
• ஒளிர்வு சரிசெய்தல் பொத்தான்: Cycles through display brightness levels.
• Sound/Alarm Toggle Button: Enables or disables audible alarms.
• டைப்-சி சார்ஜிங் போர்ட்: உள் பேட்டரியை ரீசார்ஜ் செய்வதற்கு.
• லேன்யார்டு இணைப்புப் புள்ளி: எளிதாக எடுத்துச் செல்வதற்கு.

5 அமைவு

5.1. சாதனத்தை சார்ஜ் செய்தல்

Before first use, fully charge the detector. The device features a built-in 700mAh rechargeable battery.

1. Connect the provided Type-C USB charging cable to the charging port on the detector.
2. Connect the other end of the cable to a standard USB power adapter (not included) or a power bank.
3. The battery indicator on the display will show charging status. A full charge typically takes 3 to 4 hours.
4. Once fully charged, the device can last for over 20 days with 6-7 activations per day, or approximately 10 hours of continuous use.

5.2. ஆரம்ப பவர் ஆன்

To turn on the device, press and hold the power button for a few seconds until the display illuminates.

6. இயக்க வழிமுறைகள்

6.1. பவர் ஆன்/ஆஃப்

• பவர் ஆன் செய்ய: ஆற்றல் பொத்தானை அழுத்திப் பிடிக்கவும் (⏻ ⏻ தமிழ்) for approximately 2 seconds.
• பவர் ஆஃப் செய்ய: ஆற்றல் பொத்தானை அழுத்திப் பிடிக்கவும் (⏻ ⏻ தமிழ்) for approximately 2 seconds.

6.2. பிரகாசத்தை சரிசெய்தல்

The device offers three brightness levels for its display: dark, moderate, and bright.

• Press the brightness adjustment button (💡 💡 💡 தமிழ்) repeatedly to cycle through the available brightness settings.

6.3. Adjusting Sound/Alarm

You can enable or disable the device's audible alarms.

• Press the sound/alarm toggle button (🔊) to switch the sound on or off.
• When the sound is turned off, all alarm sounds will also be deactivated. This allows for use in quiet environments without disturbance.

6.4. தானியங்கி-ஆஃப் செயல்பாடு

The detector is designed with an auto-off function that automatically shuts off after 5 minutes of inactivity to conserve battery life.

• To disable the auto-off function for continuous monitoring, press and hold the power button (⏻ ⏻ தமிழ்) for an extended period (longer than 2 seconds for power on/off) until a specific indicator appears or the device confirms continuous mode. Refer to the on-screen prompts for confirmation.
• For continuous monitoring over extended periods, it is recommended to connect the device to a mobile power source via the Type-C cable.

7. Understanding Carbon Monoxide Levels and Alarms

The detector provides both visual and audible indications of CO concentration. The color bar on the display changes, and a buzzer sounds at specific PPM levels.

• <35 ppm (Green / Good): Only the color bar flashes slowly. The air quality is considered good.
• 35-50 ppm (Yellow / Slight): The color bar flashes slowly, indicating a slight CO presence.
• 51-200 ppm (Orange / Moderate): The color bar flashes slowly, and the buzzer will sound "BB...BB..." twice. Ventilation is required.
• >200 ppm (Red / Serious): The color bar flashes slowly, and the buzzer will sharply sound "BBB...BBB..." twice. This indicates a dangerous level of CO requiring immediate action.

Note: If the sound is switched off, the buzzer will also be switched off.

8 சாதனத்தை சோதிக்கிறது

To safely test the functionality of your Neoteck CO Detector and observe changes in CO values, you can use the following methods:

• சிகரெட் புகை: CO is present in cigarette smoke. Exposing the detector to cigarette smoke will show value changes on the display.
• Incompletely Burned Wood: Place the detector near incompletely burned wood (e.g., smoldering embers from a campfire or fireplace) to observe changes in CO levels.

Always perform tests in a well-ventilated area and avoid prolonged exposure to high CO concentrations during testing.

9. பராமரிப்பு

9.1. சார்ஜ்

Regularly charge the device to ensure optimal performance. Refer to Section 5.1 for detailed charging instructions.

9.2. சுத்தம் செய்தல்

To maintain the detector's accuracy and longevity:

• சாதனத்தின் வெளிப்புறத்தை மென்மையான, உலர்ந்த துணியால் துடைக்கவும்.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the device or interfere with sensor operation.
• Ensure no liquids enter the device, especially near the sensor opening.

10. சரிசெய்தல்

10.1. Detector always shows "0"

Under normal circumstances, there is no toxic CO gas in the air, so the detector will display a value of "0" most of the time. It will only show values in certain situations where CO is present. Common sources of CO include:

• Home Heating: Devices using gas, wood, or coal can emit CO if combustion is incomplete.
• Car Exhaust: CO can build up in a closed garage or car with prolonged engine use.
• சமையல்: Gas stoves with poor ventilation or malfunctions can produce CO.
• புகைத்தல்: Indoor smoking elevates CO levels.

If you suspect CO is present but the device shows "0", ensure the device is functioning correctly by performing a safe test (see Section 8).

10.2. Alarm sounds unexpectedly

• Check for any potential sources of CO in the vicinity.
• Ensure adequate ventilation in the area.
• If the alarm persists and no obvious CO source is found, move to fresh air and contact emergency services if you experience symptoms of CO poisoning.

10.3. Device not turning on

• Ensure the battery is sufficiently charged. Connect the device to a power source using the Type-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.
• சிக்கல் தொடர்ந்தால், வாடிக்கையாளர் ஆதரவைத் தொடர்பு கொள்ளவும்.

11. தொழில்நுட்ப விவரக்குறிப்புகள்

12. உத்தரவாதம் மற்றும் ஆதரவு

The Neoteck Portable Carbon Monoxide Detector is covered by a standard manufacturer's warranty. For specific warranty details, returns, or technical support, please refer to the warranty card included in your package or contact Neoteck customer service directly through their official webதயாரிப்பு வாங்கிய தளம் அல்லது சில்லறை விற்பனையாளர்.