KERUI வயர்லெஸ் லவுட் சைரன் ஹோஸ்ட் DLB03 வழிமுறை கையேடு

1. அறிமுகம் மற்றும் முடிந்துவிட்டதுview

The KERUI Wireless Loud Siren Host DLB03 is designed to enhance your home security alarm system by providing a powerful audible alert. This siren produces a loud 115dB sound to deter intruders and alert occupants. It is engineered for both indoor and outdoor use, featuring a waterproof design.

முக்கிய குறிப்பு: This siren cannot function as a standalone alarm system. It must be integrated with existing KERUI sensors and/or a KERUI control panel. For proper operation, ensure that the same sensors are programmed to both the control panel (if used) and this siren. When an alarm is triggered by a programmed sensor, both devices will activate simultaneously.

2. பாதுகாப்பு தகவல்

• மின்சாரம்: Use only the provided power adapter. Ensure the power outlet meets the specified voltagஇ தேவைகள்.
• Loud Noise: The siren produces a sound level of up to 115dB. Avoid prolonged exposure to the siren at close range to prevent hearing discomfort.
• வெளிப்புற நிறுவல்: While the siren is waterproof, ensure the power cable connection is protected from direct water exposure to prevent electrical hazards.
• குழந்தைகள் மற்றும் செல்லப்பிராணிகள்: Keep the device out of reach of children and pets to prevent accidental activation or damage.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• KERUI Wireless Loud Siren Host (DLB03)
• பவர் அடாப்டர்

Figure 1: KERUI Wireless Loud Siren Host DLB03 and its included power adapter.

4. தயாரிப்பு அம்சங்கள்

• High Decibel Output: Produces a loud 115dB alarm sound.
• வானிலை எதிர்ப்பு வடிவமைப்பு: Constructed with durable ABS plastic, suitable for both indoor and outdoor environments.
• விரிவாக்கம்: Supports up to 40 detectors (e.g., door contacts, motion sensors), 10 remote controls, and 10 doorbell sensors.
• இணக்கத்தன்மை: Designed to work seamlessly with KERUI accessories and alarm systems.
• எளிதான ஒருங்கிணைப்பு: Simple programming method for connecting with various KERUI sensors and remotes.

Figure 2: Diagram illustrating the components of the KERUI Siren, including the weatherproof cover, adjusting screw, installation chassis, screw hole, and power connection.

5. அமைவு மற்றும் நிறுவல்

5.1 ஆரம்ப பவர்-அப்

1. Connect the provided power adapter to the siren's power input port.
2. பவர் அடாப்டரை ஒரு நிலையான மின் கடையில் செருகவும்.
3. Upon successful power-up, the siren will emit a "Bi" sound, indicating it is ready for operation or programming.

5.2 இயற்பியல் நிறுவல்

The KERUI DLB03 siren features a tabletop mount design, but its weatherproof construction allows for outdoor placement.

• இடம்: Choose a location where the siren's sound can be effectively heard, both indoors and outdoors if desired.
• மவுண்டிங்: The siren can be placed on a flat surface or mounted using the screw holes on its installation chassis. Ensure the mounting surface is stable.
• கேபிள் மேலாண்மை: If installing outdoors, ensure the power cable is routed and protected to prevent damage from weather or tampஎரிங்.

6. Programming Sensors and Remotes

The siren is programmed by repeatedly plugging and unplugging its power adapter. An important tip for programming is to trigger the sensors within 6 seconds during the operation. If the 6-second window is missed, unplug and plug the siren back in to re-enter programming status.

குறிப்பு: This siren cannot be programmed directly with a KERUI control panel as a standalone siren. If you are using a control panel, you must program the same sensors to இரண்டும் the control panel and this siren.

6.1 Programming a Remote Control

1. Plug in the siren's power adapter.
2. Unplug and plug the siren 3 முறை. The siren will emit a "Bi" sound.
3. Within 6 seconds, press any button on the remote control you wish to program. The siren will emit another "Bi" sound to confirm successful programming.

6.2 Programming a Door/PIR Sensor

1. Plug in the siren's power adapter.
2. Unplug and plug the siren 5 முறை. The siren will emit a "Bi" sound.
3. Within 6 seconds, trigger the door contact sensor (separate the two parts) or the PIR motion sensor (detect movement). The siren will emit another "Bi" sound to confirm successful programming.

6.3 Programming a Doorbell Button

1. Plug in the siren's power adapter.
2. Unplug and plug the siren 7 முறை. The siren will emit a "Bi" sound.
3. Within 6 seconds, press the doorbell button. The siren will emit another "Bi" sound to confirm successful programming.

6.4 தொழிற்சாலை அமைப்புகளை மீட்டமைத்தல்

1. Plug in the siren's power adapter.
2. Unplug and plug the siren 10 முறை. The siren will emit a longer "Bi" sound to confirm that all programmed accessories have been cleared and factory settings restored.

Figure 3: Step-by-step visual instructions for programming various KERUI accessories and performing a factory reset on the siren.

Figure 4: The KERUI siren shown alongside a compatible remote control, highlighting their combined functionality.

7. ஆபரேஷன்

Once the siren and your KERUI sensors/remotes are successfully programmed, the system is ready for operation.

• ஆயுதம் Use a programmed remote control to arm or disarm the siren. Press the arming key to activate the alarm function, and the disarming key to silence it.
• அவசர எச்சரிக்கை: In case of an emergency, press the dedicated emergency key on the remote control for an immediate alarm activation.
• கதவு மணி செயல்பாடு: If a doorbell button is programmed, pressing it will cause the siren to emit a doorbell sound.
• அலாரம் காலம்: When triggered, the siren will sound for approximately 2 minutes and then stop automatically. To re-arm the system after an alarm, you will need to use the remote control.

குறிப்பு: A remote control is essential for controlling the siren's functions. Without a remote, the siren cannot be armed, disarmed, or used for emergency alerts.

படம் 5: ஒரு முன்னாள்ample of a KERUI alarm system setup, showing the siren integrated with a motion sensor, door sensor, and remote control.

Figure 6: Illustration demonstrating the capability to program multiple KERUI sirens with the same sensor for increased alarm coverage and volume.

8. பராமரிப்பு

• சுத்தம்: Wipe the siren's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• மின் இணைப்பு: Periodically check the power adapter and cable for any signs of damage or wear. Ensure a secure connection.
• செயல்பாட்டு சோதனை: It is recommended to test the siren's functionality periodically by triggering a programmed sensor to ensure it is operating correctly.

9. சரிசெய்தல்

10. விவரக்குறிப்புகள்

• மாதிரி: DLB03
• பிராண்ட்: KERUI
• இரைச்சல் நிலை: Up to 115 Decibels
• மவுண்டிங் வகை: Tabletop Mount (can be wall-mounted via screw holes)
• சென்சார் தொழில்நுட்பம்: Contact Sensor (compatible with various KERUI wireless sensors)
• சக்தி ஆதாரம்: Corded Electric (via included power adapter)
• தயாரிப்பு பரிமாணங்கள்: 4 x 2.8 x 4.8 அங்குலம் (தோராயமாக)
• பொருளின் எடை: 15.5 அவுன்ஸ் (தோராயமாக)
• சேர்க்கப்பட்ட கூறுகள்: Alarm siren, power adapter
• பேட்டரிகள்: Not required (corded electric)
• நிறம்: கருப்பு

11. உத்தரவாதம் மற்றும் ஆதரவு

KERUI provides the following support for the DLB03 Wireless Loud Siren Host:

• உத்தரவாதம்: வாங்கிய தேதியிலிருந்து 12 மாத வரையறுக்கப்பட்ட உத்தரவாதம்.
• தொழில்நுட்ப ஆதரவு: Lifetime free technical support is available for all KERUI products.
• வாடிக்கையாளர் சேவை: For any inquiries or assistance, please contact KERUI customer service via Amazon emails. Responses are typically provided within 24 hours.

For further assistance or to explore additional KERUI alarm system components, please visit the official KERUI store on Amazon.