அறிமுகம்
This manual provides instructions for the installation, operation, maintenance, and troubleshooting of the InSinkErator AS101K-8 AquaSaver Commercial Disposal Control Panel. The AquaSaver system is designed to optimize water usage for InSinkErator commercial disposer systems by sensing motor load and regulating water flow during grinding and non-grinding operations. Proper use of this control panel can lead to significant water savings.
முக்கியமான பாதுகாப்பு தகவல்
எச்சரிக்கை:
- யூனிட்டை சர்வீஸ் செய்வதற்கு அல்லது சுத்தம் செய்வதற்கு முன் எப்போதும் மின்சாரத்தைத் துண்டிக்கவும்.
- This control panel is designed for use only with InSinkErator commercial disposers.
- Installation and service must be performed by qualified personnel in accordance with all local and national electrical codes.
- மின்சார அதிர்ச்சியைத் தடுக்க சரியான தரையை உறுதிப்படுத்தவும்.
- Do not operate the unit if any part is damaged or missing.
Refer to the warning labels on the product for specific safety instructions.
படம் 1: முன் view of the InSinkErator AS101K-8 AquaSaver Control Panel, showing the warning labels and control buttons.
முக்கிய அம்சங்கள்
- Solid state control circuit for reliable operation.
- NEMA 4 - stainless steel enclosure for durability and protection against environmental factors.
- Automatic reversing magnetic contactors for extended motor life.
- Includes two solenoids and two flow control valves for precise water management.
- 10-minute timed run option for specific operational needs.
- 24-volt operation for safety and efficiency.
- Programmable post-flush feature to ensure thorough cleaning.
- Automatic shut-off in case of power interruption for safety.
- Line disconnect switch located on the front panel for easy access and safety.
அமைவு மற்றும் நிறுவல்
Installation of the InSinkErator AS101K-8 AquaSaver Control Panel should only be performed by a qualified electrician or service technician. Adhere to all local and national electrical and plumbing codes.
கண்ட்ரோல் பேனலை ஏற்றுகிறது
- Select a suitable location for mounting the NEMA 4 stainless steel enclosure, ensuring it is easily accessible for operation and maintenance, and protected from excessive physical impact.
- Use appropriate fasteners to securely mount the panel to a sturdy surface. The panel dimensions are 7 x 10 x 15.75 inches and it weighs 25 pounds.
மின் இணைப்புகள்
- Ensure the main power supply to the disposer system is disconnected at the circuit breaker before making any electrical connections.
- Connect the incoming 380/460V power supply to the designated terminals within the control panel.
- Connect the control panel output to the InSinkErator commercial disposer motor.
- Connect the 24-volt control wiring as per the wiring diagram (not included in this manual, refer to product packaging or manufacturer's webதளம்)
- Ensure all connections are tight and secure, and proper grounding is established.
நீர் இணைப்புகள்
- Install the two solenoids and two flow control valves into the water supply line feeding the disposer.
- Connect the control wiring from the AquaSaver panel to the solenoids as per the wiring diagram.
- Ensure all plumbing connections are leak-free.
படம் 2: பக்கம் view of the InSinkErator AS101K-8 AquaSaver Control Panel, highlighting the mounting brackets for installation.
இயக்க வழிமுறைகள்
ஆரம்ப பவர்-அப்
- After installation is complete and all connections are verified, turn on the main power supply to the disposer system at the circuit breaker.
- Engage the line disconnect switch on the front panel to power the control unit.
இயல்பான செயல்பாடு
- The AquaSaver system will automatically sense the load on the disposer motor.
- During grinding operations, the system will regulate the water flow to the disposer as needed.
- During non-grinding periods, water flow will be reduced or stopped to conserve water.
10-Minute Timed Run Option
The control panel includes a 10-minute timed run option for specific applications. Consult the detailed programming guide (refer to product packaging or manufacturer's website) for instructions on activating and configuring this feature.
Programmable Post-Flush
The programmable post-flush feature ensures that the disposer and drain lines are thoroughly cleared after use. Refer to the detailed programming guide for instructions on setting the duration and activation of the post-flush cycle.
பராமரிப்பு
Regular maintenance ensures optimal performance and longevity of your AquaSaver control panel.
- மாதாந்திர: Inspect the exterior of the control panel for any signs of damage or corrosion. Clean the stainless steel enclosure with a mild, non-abrasive cleaner.
- காலாண்டு: With power disconnected, open the enclosure and visually inspect all electrical connections for tightness. Check for any signs of wear on wiring.
- ஆண்டுதோறும்: Have a qualified technician inspect the solenoids and flow control valves for proper operation and calibrate if necessary.
எச்சரிக்கை:
Always disconnect power to the unit before performing any internal maintenance or inspection.
சரிசெய்தல்
This section provides solutions to common issues. For problems not listed here, contact InSinkErator customer support or a qualified service technician.
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Control panel has no power. | Main power supply off; Line disconnect switch off; Blown fuse/tripped breaker. | Check main power supply; Engage line disconnect switch; Check and reset circuit breaker or replace fuse. |
| Disposer not receiving water. | Water supply off; Solenoid valve malfunction; Flow control valve blockage. | Check water supply; Inspect and test solenoids; Check flow control valves for obstructions. |
| Disposer motor not starting. | Motor overload; Faulty contactor; Wiring issue. | Check disposer for jams and clear; Inspect automatic reversing magnetic contactors; Verify all electrical connections. |
| அதிகப்படியான நீர் பயன்பாடு. | AquaSaver sensor malfunction; Flow control valve issue; Incorrect programming. | Contact service technician to check sensor; Inspect flow control valves; Review நிரலாக்க அமைப்புகள். |
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| மாதிரி எண் | AS101K-8 |
| உள்ளீடு தொகுதிtage | 380/460V |
| கட்டுப்பாடு தொகுதிtage | 24V |
| அடைப்பு வகை | NEMA 4 - Stainless Steel |
| தயாரிப்பு பரிமாணங்கள் (H x W x D) | 15.75 x 10 x 7 அங்குலம் |
| பொருளின் எடை | 25 பவுண்டுகள் |
| உள்ளிட்ட கூறுகள் | Two solenoids, two flow control valves |
| உற்பத்தியாளர் | InSinkErator |
| UPC | 050375019510 |
உத்தரவாதம் மற்றும் ஆதரவு
For warranty information, technical support, or to locate authorized service centers, please visit the official InSinkErator website or contact their customer service department. Keep your purchase receipt and model number (AS101K-8) handy when contacting support.
ஆன்லைன் ஆதாரங்கள்: www.insinkerator.com
வாடிக்கையாளர் சேவை: Refer to the InSinkErator webதற்போதைய தொடர்புத் தகவலுக்கான தளம்.
