லில்லிகோ டி-டெக் பிளஸ்

LILYGO T-Deck Plus ESP32-S3 Meshtastic Development Board User Manual

Model: T-Deck Plus with Meshtastic Firmware

1. அறிமுகம்

The LILYGO T-Deck Plus is a versatile development board designed for long-range, low-power LoRa communication, featuring an ESP32-S3 microcontroller, a 2.8-inch display, a QWERTY keyboard, and integrated GPS. This manual provides essential instructions for setting up, operating, and maintaining your T-Deck Plus device, specifically configured with Meshtastic firmware for mesh networking capabilities.

2. தயாரிப்பு முடிந்துவிட்டதுview

The LILYGO T-Deck Plus combines several key components into a compact form factor, enabling robust off-grid communication. Key features include:

2.1. சாதன கூறுகள்

LILYGO T-Deck Plus angled view ஆண்டெனாவுடன்
படம் 1: கோணல் view of the LILYGO T-Deck Plus with its external antenna.

This image shows the LILYGO T-Deck Plus from an angled perspective, highlighting its compact design and the attached external antenna, which is crucial for LoRa communication.

LILYGO T-Deck Plus front view
படம் 2: முன் view of the LILYGO T-Deck Plus, showing the display and QWERTY keyboard.

ஒரு நேரடி முன்பக்கம் view of the device, emphasizing the 2.8-inch display and the full QWERTY keyboard for user interaction.

LILYGO T-Deck Plus back view
படம் 3: பின் view of the LILYGO T-Deck Plus, showing mounting points.

The rear of the device, illustrating the design and potential mounting options.

LILYGO T-Deck Plus features diagram
Figure 4: Detailed diagram of LILYGO T-Deck Plus features and interfaces.

இந்த வரைபடம் வெடித்ததை வழங்குகிறது view and labels various components such as the MCU, wireless connectivity, development environment, flash memory, onboard functions (GPS, TF Card, Microphone, Speaker), display type, and LoRa transceiver details.

LILYGO T-Deck Plus pinmap diagram
Figure 5: LILYGO T-Deck Plus pinmap and interface connections.

A comprehensive pinmap diagram detailing the connections for the display, TF card, microphone, speaker, LoRa module, and other interfaces, useful for advanced development.

3 அமைவு

3.1. ஆரம்ப சட்டசபை

  1. ஆண்டெனா நிறுவல்: Carefully screw the external antenna into the designated port on the device. Ensure it is securely attached before powering on to prevent damage to the LoRa module.
  2. பேட்டரி இணைப்பு: Connect the included Lithium Ion battery to the appropriate connector on the board.
  3. பவர் ஆன்: சாதனத்தை இயக்க ஆற்றல் பொத்தானை அழுத்திப் பிடிக்கவும்.

3.2. Firmware Installation (Meshtastic)

The LILYGO T-Deck Plus is designed to run Meshtastic firmware, enabling mesh communication. For detailed instructions on flashing the firmware, please refer to the official Meshtastic documentation and GitHub repository. The process typically involves downloading the firmware and using a flashing tool.

Video 1: Guide on installing Meshtastic firmware. While this video specifically mentions the LILYGO T-Echo, the general steps for flashing Meshtastic firmware are applicable to other compatible LILYGO devices like the T-Deck Plus.

This video demonstrates the process of installing Meshtastic firmware onto a LILYGO device. Users should adapt the specific firmware file to their T-Deck Plus model.

Video 2: Assembly instructions for an ESP32 LoRa board. This video provides a general overview of assembling a LoRa board with a battery and case, which can be helpful for understanding the physical setup of the T-Deck Plus.

This video illustrates the assembly of a similar ESP32 LoRa board, including battery and case installation. Users can refer to this for guidance on physical component integration, noting that the T-Deck Plus has its own specific enclosure.

4. இயக்க வழிமுறைகள்

4.1. அடிப்படை வழிசெலுத்தல்

Use the integrated QWERTY keyboard and navigation buttons to interact with the device's interface. The 2.8-inch display will show menus, messages, and status information.

4.2. Meshtastic Application

To fully utilize the Meshtastic features, install the official Meshtastic application on your smartphone (Android or iOS). The device connects to your phone via Bluetooth, allowing for easier message typing, map viewing, and configuration.

Video 3: Demonstration of the LILYGO T-LoRa Pager in operation.

This video showcases the LILYGO T-LoRa Pager, a similar device, in action, demonstrating its user interface and basic functionalities. This can provide insight into the operational experience of the T-Deck Plus.

4.3. LoRa Communication

The device uses LoRa technology for long-range communication. Ensure your device is within range of other Meshtastic nodes to form a mesh network. Messages are automatically forwarded through the mesh to reach their destination.

Video 4: LoRa communication demonstration using an ESP32 LoRa V3 board.

This video provides a detailed demonstration of LoRa communication, illustrating how data is sent and received between two devices. While featuring a different board, the underlying LoRa principles and functionality are relevant to the T-Deck Plus.

4.4. ஜிபிஎஸ் செயல்பாடு

The integrated Ulbox GPS module provides location data. This data can be used for mapping within the Meshtastic application or for other location-based services supported by the firmware.

5. பராமரிப்பு

6. சரிசெய்தல்

7. விவரக்குறிப்புகள்

அம்சம்விவரம்
தயாரிப்பு பரிமாணங்கள்4.53 x 2.83 x 0.79 அங்குலம்
பொருளின் எடை8 அவுன்ஸ்
உற்பத்தியாளர்லில்லிகோ
பொருள் மாதிரி எண்Meshtastic Firmware (T-Deck Plus)
பேட்டரிகள்1 லித்தியம் அயன் பேட்டரி தேவை (சேர்க்கப்பட்டுள்ளது)
ஆண்டெனா வகைவெளி
நிறம்கருப்பு
அதிகபட்ச வரம்பு1000 மீட்டர்
UPC717382831107

8. உத்தரவாதம் மற்றும் ஆதரவு

For any questions or suggestions regarding the LILYGO T-Deck Plus, please contact LILYGO customer service. We are committed to providing timely assistance.

Additional resources can be found at: