ICERIVER KS7 LITE 4.2TH Kaspa Miner Instruction Manual

1. அறிமுகம்

This manual provides essential instructions for the safe and efficient operation of your ICERIVER KS7 LITE 4.2TH Kaspa Miner. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage to the device or injury to personnel. This device is designed for Kaspa cryptocurrency mining.

2. பாதுகாப்பு தகவல்

• மின் பாதுகாப்பு: Ensure the power supply unit (PSU) is connected to a grounded outlet. Do not overload electrical circuits. Use only the provided power cables or certified replacements.
• காற்றோட்டம்: The miner generates heat. Ensure adequate airflow around the device. Do not block ventilation openings. Maintain a clear space of at least 20 cm (8 inches) around all sides of the miner.
• செயல்படும் சூழல்: Operate the miner within the specified temperature range of 0°C to 40°C (32°F to 104°F). Avoid high humidity, dust, and corrosive environments.
• கையாளுதல்: சாதனத்தை கவனமாகக் கையாளவும். கீழே விழுவதையோ அல்லது வலுவான தாக்கங்களுக்கு ஆளாக்குவதையோ தவிர்க்கவும்.
• பிரித்தல்: Do not attempt to disassemble or modify the miner. This will void the warranty and may cause damage or injury.

3. தொகுப்பு உள்ளடக்கங்கள்

தொகுப்பில் அனைத்து பொருட்களும் உள்ளதா என சரிபார்க்கவும்:

• ICERIVER KS7 LITE 4.2TH Kaspa Miner Unit
• பவர் சப்ளை யூனிட் (PSU)
• Power Cable (region-specific)
• இந்த அறிவுறுத்தல் கையேடு

4. தயாரிப்பு முடிந்துவிட்டதுview

Familiarize yourself with the components of your ICERIVER KS7 LITE miner.

படம் 4.1: முன் View - This image displays the front of the ICERIVER KS7 LITE Kaspa Miner, featuring two prominent cooling fans with protective grilles. The fans are crucial for dissipating heat generated during operation.

படம் 4.2: பின்புறம் View - The rear panel of the miner is shown, highlighting the Ethernet port for network connectivity, LED indicator lights for status, a power on/off switch, and the AC power input socket. Also visible are ventilation grilles and a small antenna connector, likely for Wi-Fi (if applicable).

Figure 4.3: Side-Front View - This perspective shows the compact, black rectangular casing of the ICERIVER KS7 LITE miner, with a clear view of the two cooling fans on the front panel and the smooth side panel.

முக்கிய கூறுகள்:

• குளிரூட்டும் விசிறிகள்: Located at the front, these fans ensure optimal operating temperature.
• ஈதர்நெட் போர்ட்: For network connection to your router or switch.
• காட்டி விளக்குகள்: Provide status feedback (e.g., power, network activity).
• மின்விசை மாற்றும் குமிழ்: சாதனத்தை ஆன் அல்லது ஆஃப் செய்ய.
• ஏசி பவர் உள்ளீடு: Connects to the power supply unit.

5 அமைவு

5.1 வேலை வாய்ப்பு

• Choose a stable, flat surface in a well-ventilated area.
• Ensure the ambient temperature is within 0°C to 40°C.
• Keep the miner away from direct sunlight, heat sources, and excessive dust or moisture.
• Maintain at least 20 cm (8 inches) of clear space around all sides for proper airflow.

5.2 இணைக்கும் சக்தி

1. Connect the power cable to the Power Supply Unit (PSU).
2. Connect the PSU output cables to the corresponding power input ports on the miner. Ensure all connections are secure.
3. Plug the power cable into a grounded electrical outlet (100-240V AC).

5.3 பிணையத்தை இணைக்கிறது

• Connect an Ethernet cable from your router or network switch to the Ethernet port on the rear of the miner.
• Ensure the network connection is active and stable.

5.4 ஆரம்ப பவர்-ஆன்

1. After connecting power and network, flip the power switch on the rear of the miner to the "ON" position.
2. The indicator lights will illuminate, and the fans will start.
3. Allow a few minutes for the miner to boot up and connect to the network.

6. இயக்க வழிமுறைகள்

6.1 அணுகல் Web இடைமுகம்

1. Once the miner is powered on and connected to the network, you will need to find its IP address. This can typically be done through your router's administration page or by using an IP scanner tool on your network.
2. திற a web browser on a computer connected to the same network and enter the miner's IP address into the address bar.
3. Log in using the default credentials (refer to manufacturer documentation or the device label for default username/password).

6.2 Configuration for Mining

• உள்ளே web interface, navigate to the mining settings.
• Enter your Kaspa mining pool URL, worker name, and password (if required by your pool).
• Save the settings and restart the miner if prompted.
• Monitor the status page to confirm that the miner has started hashing and is submitting shares to the pool.

7. பராமரிப்பு

• தூசி அகற்றுதல்: Regularly inspect the cooling fans and ventilation grilles for dust accumulation. Use compressed air or a soft brush to gently clean them. Ensure the miner is powered off and unplugged before cleaning.
• சுற்றுச்சூழல் கண்காணிப்பு: Periodically check the operating temperature and humidity of the environment to ensure it remains within the recommended range.
• நிலைபொருள் புதுப்பிப்புகள்: Check the manufacturer's official website for any available firmware updates. Follow the provided instructions carefully for updating firmware to ensure stability and performance.
• கேபிள் ஆய்வு: Periodically inspect all power and network cables for any signs of wear or damage. Replace damaged cables immediately.

8. சரிசெய்தல்

9. விவரக்குறிப்புகள்

10. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer, ICERIVER, directly. Retain your proof of purchase for warranty claims. Do not attempt to repair the device yourself, as this may void the warranty.