isinwheel Electric Bike Controller M10 User Manual

1. அறிமுகம்

This manual provides essential instructions for the proper installation, operation, and maintenance of your isinwheel Electric Bike Controller, designed for the M10 electric bike model. Please read this manual thoroughly before installation and use to ensure safe and efficient performance of your electric bicycle.

2. பாதுகாப்பு தகவல்

• Always disconnect the battery before performing any installation, maintenance, or repair work on the controller or electric bike system.
• ஷார்ட் சர்க்யூட்களைத் தடுக்க அனைத்து இணைப்புகளும் பாதுகாப்பாகவும் முறையாக காப்பிடப்பட்டதாகவும் இருப்பதை உறுதிசெய்யவும்.
• Avoid exposing the controller to water, extreme temperatures, or direct sunlight for prolonged periods.
• If you are unsure about any installation steps, consult a qualified electric bike technician.
• Do not attempt to open or modify the controller casing, as this will void the warranty and may cause damage or injury.

3. தொகுப்பு உள்ளடக்கங்கள்

• 1 x isinwheel Electric Bike Controller (Model GLX-M0003US-)

4. விவரக்குறிப்புகள்

5. அமைவு மற்றும் நிறுவல்

The isinwheel Electric Bike Controller is designed for integration into the M10 electric bike system. Proper installation is crucial for functionality and safety. It is highly recommended that installation be performed by an experienced technician.

5.1 General Connection Overview

The controller manages power distribution from the battery to the motor and other components. It typically connects to:

• பேட்டரி: Main power input. Ensure correct polarity.
• மோட்டார்: Output for motor power and phase signals.
• Display/Control Panel: For user interface, speed settings, and system monitoring.
• த்ரோட்டில்: Input for speed control.
• பெடல் அசிஸ்ட் சென்சார் (PAS): Input for pedal assistance.
• பிரேக் லீவர்கள்: Input for motor cut-off during braking.

Refer to the wiring diagram provided with your M10 electric bike for specific connection points and wire colors. Ensure all connectors are fully seated and secured.

படம் 1: The isinwheel Electric Bike Controller, showing its aluminum casing with specifications printed on it and various colored wire connectors extending from one end. The specifications visible include 'Brushless Motor Controller', 'Battery Voltage: 36V', 'Cutoff Voltage: 29V', 'Current Limit: 15A', 'Mode: GLX-M0003US-', and 'Number: 240122'. A yellow XT60-style connector is also visible among the wires.

5.2 கட்டுப்படுத்தியை ஏற்றுதல்

Mount the controller in a secure, dry location on the bicycle frame, away from direct impact zones and excessive vibration. Ensure adequate airflow around the controller for heat dissipation. Use appropriate fasteners to secure it firmly.

6. இயக்க வழிமுறைகள்

Once the controller is correctly installed and all connections are verified, the electric bike system can be operated via the bike's display or control panel.

• பவர் ஆன்/ஆஃப்: Use the power button on your electric bike's display unit to turn the system on or off. The controller will activate upon power-on.
• வேகக் கட்டுப்பாடு: Adjust the speed or power assist level using the controls on your display unit or by engaging the throttle (if installed).
• பெடல் உதவி: The controller will engage motor assistance based on your pedaling input from the PAS sensor.
• பிரேக்கிங்: The controller will cut off motor power when the brake levers are engaged, ensuring safe stopping.

Always operate your electric bike responsibly and in accordance with local regulations.

7. பராமரிப்பு

Regular maintenance helps ensure the longevity and reliable performance of your controller.

• சுத்தம்: Keep the controller clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• இணைப்பு சோதனைகள்: Periodically inspect all wire connections to ensure they are secure and free from corrosion or damage.
• சுற்றுச்சூழல் பாதுகாப்பு: Avoid storing or operating the electric bike in conditions of extreme humidity or temperature fluctuations.
• சேத ஆய்வு: Regularly check the controller casing for any signs of physical damage.

8. சரிசெய்தல்

If you encounter issues with your electric bike's electrical system, consider the following basic troubleshooting steps:

• சக்தி இல்லை:
  • பேட்டரி சார்ஜ் செய்யப்பட்டு சரியாக இணைக்கப்பட்டுள்ளதா என சரிபார்க்கவும்.
  • Verify that the main power switch on the battery or display is turned on.
  • Inspect all power cables for visible damage or loose connections.
• மோட்டார் பதிலளிக்கவில்லை:
  • Ensure the throttle or pedal assist sensor is correctly connected and functioning.
  • Check motor phase wires and Hall sensor wires for secure connections.
  • Verify that the brake levers are not stuck in the engaged position, which would cut motor power.
• ஒழுங்கற்ற நடத்தை:
  • Inspect all wiring for signs of fraying, pinching, or water ingress.
  • Ensure the controller is securely mounted and not vibrating excessively.

If these steps do not resolve the issue, please contact isinwheel customer support or a certified electric bike repair center.

9. உத்தரவாதம் மற்றும் ஆதரவு

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official isinwheel webவாங்கியதற்கான சான்றாக உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.

10 உற்பத்தியாளர் தகவல்

உற்பத்தியாளர்: ஷென்சென் ஜின்செங் டைம்ஸ் டெக்னாலஜி கோ., லிமிடெட்

Controller Manufacturer (as per label): GALAXY BICYCLE CO.,LTD