KAIWEETS HT100s-R Voltage Tester and KT301T GFCI Outlet Tester Instruction Manual

1. அறிமுகம்

This instruction manual provides essential information for the safe and proper operation of your KAIWEETS HT100s-R Non-Contact Voltage Tester and KAIWEETS KT301T GFCI Outlet Tester. Please read this manual thoroughly before use and retain it for future reference. These devices are designed to assist in electrical testing and ensure safety in various applications.

2. பாதுகாப்பு தகவல்

Always prioritize safety when working with electricity. Follow all local electrical codes and safety regulations. Do not use the testers if they appear damaged or are not functioning correctly. Always wear appropriate personal protective equipment (PPE).

அதிகபட்ச தொகுதியை தாண்ட வேண்டாம்tage ratings specified for each device.
பயன்படுத்துவதற்கு முன் பேட்டரி பெட்டி பாதுகாப்பாக மூடப்பட்டிருப்பதை உறுதிசெய்யவும்.
Do not attempt to repair or modify the devices. Contact customer support for assistance.
Verify the tester's operation on a known live circuit before testing an unknown circuit.

3. KAIWEETS HT100s-R Non-Contact Voltagஇ சோதனையாளர்

3.1 தயாரிப்பு அம்சங்கள்

தொடர்பு இல்லாத ஏசி தொகுதிtagஇ கண்டறிதல் (NCV)
Adjustable Sensitivity Modes (High: 12-1000V, Low: 70-1000V)
Visual and Audible Alarms
Live/Null Wire Identification
Breakpoint Test Function
ஒருங்கிணைந்த LED ஒளிரும் விளக்கு
தானியங்கி பவர்-ஆஃப்

3.2 Setup and Battery Installation

The HT100s-R requires 2 AAA batteries (included). To install or replace batteries:

Twist the tail cap counter-clockwise to open the battery compartment.
இரண்டு AAA பேட்டரிகளைச் செருகவும், சரியான துருவமுனைப்பைக் கவனிக்கவும் (+/-).
Replace the tail cap and twist clockwise to secure it.

3.3 இயக்க வழிமுறைகள்

3.3.1 பவர் ஆன்/ஆஃப்

ஆற்றல் பொத்தானை அழுத்தவும் (⏻ ⏻ தமிழ்) to turn the device on. Press and hold the power button to turn it off. The device will automatically power off after a period of inactivity to conserve battery.

3.3.2 தொடர்பு இல்லாத தொகுதிtagஇ (NCV) கண்டறிதல்

Place the tip of the tester near the conductor, outlet, or wire you wish to test. If AC voltage is detected, the tip will glow red, and an audible beep will sound. The frequency of the beeps and the percentage value on the screen will increase with higher voltage or closer proximity to the source.

KAIWEETS HT100s-R Non-Contact Voltage Tester detecting voltage in an electrical outlet.

Image: The HT100s-R tester being used to detect voltage in an electrical outlet. The tip glows red, indicating voltagஇ இருப்பு.

3.3.3 உணர்திறன் சரிசெய்தல்

The HT100s-R features two sensitivity modes:

High Sensitivity Mode (12-1000V): Suitable for detecting lower voltages or detecting voltage through insulation.
Low Sensitivity Mode (70-1000V): Ideal for distinguishing live wires in close proximity or for higher voltagஇ கண்டறிதல்.

The screen color indicates voltagமின் நிலை: சிவப்பு உயர் தொகுதிக்குtage/live wire, பச்சை குறைந்த ஒலியளவிற்குtage/null wire.

KAIWEETS HT100s-R showing high and low sensitivity modes for null and live wire detection.

Image: Illustrations demonstrating the HT100s-R in both high and low sensitivity modes, indicating detection of null and live wires with corresponding visual and audible feedback.

3.3.4 Breakpoint Test

To perform a breakpoint test, move the tester along an insulated wire. The tester will indicate the presence of voltage up to the point of the break, helping to locate faults in cables.

KAIWEETS HT100s-R performing a breakpoint test on an insulated cable.

Image: The HT100s-R being used to perform a breakpoint test on an insulated electrical cable, illustrating its ability to detect breaks.

3.3.5 எல்.ஈ.டி ஒளிரும் விளக்கு

Press the flashlight button (💡 💡 💡 தமிழ்) to turn on the integrated LED flashlight. This feature is useful for illuminating dimly lit work areas.

KAIWEETS HT100s-R with its LED flashlight illuminated in a dark electrical panel.

Image: The HT100s-R's bright LED flashlight illuminating a dark electrical panel, demonstrating its utility in low-light conditions.

4. KAIWEETS KT301T GFCI Outlet Tester

4.1 தயாரிப்பு அம்சங்கள்

GFCI சோதனை செயல்பாடு
Standard Outlet Wiring Condition Detection
Clear LCD Display with Real-time Voltage
Bottom Indicator Lights for Enhanced Visibility
Auto-Hold Data Function (5 minutes)
குறைந்த பேட்டரி எச்சரிக்கை
5-Minute Auto Power-Off
CAT II 110-125V Safety Rating

KAIWEETS KT301T GFCI Outlet Tester displaying its features and design.

படம்: ஒரு ஓவர்view of the KAIWEETS KT301T GFCI Outlet Tester, highlighting its key features such as auto-hold, GFCI testing, LCD display, and low battery alert.

4.2 Setup and Battery Installation

The KT301T requires 2 AAA batteries (included). To install or replace batteries, open the battery compartment located on the back of the device, insert the batteries with correct polarity, and close the compartment securely.

4.3 இயக்க வழிமுறைகள்

4.3.1 Standard Outlet Testing

Plug the KT301T directly into a standard 3-prong outlet. The LCD display will immediately show the real-time voltage and the wiring condition. The bottom indicator lights will also provide a quick visual status (e.g., green for correct, orange for faults).

KAIWEETS KT301T testing both a standard outlet and a GFCI outlet.

Image: The KT301T in use, demonstrating its capability to test both standard electrical outlets and GFCI outlets, displaying voltage and wiring status.

4.3.2 GFCI Outlet Testing

After plugging the KT301T into a GFCI outlet and observing the initial wiring status, press the சோதனை button. A correctly functioning GFCI outlet should trip, cutting power to the outlet. Press the மீட்டமை button on the GFCI outlet to restore power. If the GFCI does not trip, it indicates a fault.

4.3.3 LCD Display and Indicators

The 1.8-inch backlit LCD color screen provides clear readings of voltage and wiring status. Green indicates correct wiring, while orange indicates a fault. The bottom indicator lights offer additional visual cues, especially in dark environments.

KAIWEETS KT301T's backlit LCD color screen displaying voltage and wiring status.

Image: A close-up of the KT301T's 1.8-inch backlit LCD color screen, showing a clear display of voltage and correct wiring status, suitable for various lighting conditions.

4.3.4 Auto-Hold Data

The auto-hold function captures and locks the test results on the screen for 5 minutes, allowing for easy viewing even in hard-to-reach locations or after removing the tester from the outlet.

KAIWEETS KT301T demonstrating the hands-free data hold function.

Image: The KT301T demonstrating its hands-free data hold feature, which locks the reading on the screen for convenient viewing after testing an outlet.

5. பராமரிப்பு

சுத்தம் செய்தல்: Wipe the devices with a dry, soft cloth. Do not use abrasive cleaners or solvents.
பேட்டரி மாற்று: Replace batteries when the low battery indicator appears or if the device does not power on. Always use new, high-quality AAA batteries.
சேமிப்பு: Store the testers in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.

6. சரிசெய்தல்

பிரச்சனை	சாத்தியமான காரணம்	தீர்வு
சாதனம் இயங்கவில்லை.	செயலிழந்த அல்லது தவறாக நிறுவப்பட்ட பேட்டரிகள்.	சரியான துருவமுனைப்பை உறுதிசெய்து, பேட்டரிகளை மாற்றவும்.
HT100s-R gives inconsistent readings.	Interference from nearby electrical fields; incorrect sensitivity mode.	Move away from other electrical devices; switch to low sensitivity mode if appropriate.
KT301T shows a fault, but outlet seems to work.	Hidden wiring fault (e.g., open ground, open neutral, reverse polarity).	Consult a qualified electrician to inspect the wiring.
KT301T GFCI test does not trip.	Faulty GFCI outlet or incorrect wiring.	Do not use the outlet. Have a qualified electrician inspect and repair/replace the GFCI outlet.

7. விவரக்குறிப்புகள்

7.1 KAIWEETS HT100s-R Non-Contact Voltagஇ சோதனையாளர்

ஏசி தொகுதிtagமின் வரம்பு: 12V - 1000V (High Sensitivity), 70V - 1000V (Low Sensitivity)
அதிர்வெண்: 50/60Hz
அலாரம் முறை: Sound and Light
ஒளிரும் விளக்கு: Yes, LED
ஆட்டோ பவர்-ஆஃப்: ஆமாம்
பேட்டரி: 2 x AAA (சேர்க்கப்பட்டுள்ளது)
பாதுகாப்பு மதிப்பீடு: CAT III 1000V, CAT IV 600V

7.2 KAIWEETS KT301T GFCI Outlet Tester

இயக்க தொகுதிtage: 110V - 125V AC
GFCI பயணம் தற்போதைய: 5mA
காட்சி: 1.8-inch Backlit LCD Color Screen
Wiring Indications: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
தானாக பிடி: Yes (5 minutes)
ஆட்டோ பவர்-ஆஃப்: Yes (5 minutes)
பேட்டரி: 2 x AAA (சேர்க்கப்பட்டுள்ளது)
பாதுகாப்பு மதிப்பீடு: CAT II 125V

8. உத்தரவாதம் மற்றும் வாடிக்கையாளர் ஆதரவு

KAIWEETS provides a 3 வருட உத்தரவாதம் for these products. If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your HT100s-R Voltage Tester or KT301T GFCI Outlet Tester, please contact KAIWEETS customer support for professional assistance.

For support, visit the official KAIWEETS webஉங்கள் தயாரிப்பு பேக்கேஜிங்குடன் வழங்கப்பட்ட தொடர்புத் தகவலை தளத்தில் அல்லது பார்க்கவும்.

	KAIWEETS KT301P Digital Circuit Breaker Finder User Manual User manual for the KAIWEETS KT301P Digital Circuit Breaker Finder, detailing its features, usage, and specifications for identifying circuit breakers and testing wiring conditions.
	Kaiweets KM117B Receptacle Tester Instructions and Safety Guide Comprehensive guide for the Kaiweets KM117B Receptacle Tester, detailing its features for detecting wiring problems, GFCI testing, and voltage measurements. Includes safety warnings and technical specifications.
	KAIWEETS KT301P Digital Circuit Breaker Finder User Manual User manual for the KAIWEETS KT301P Digital Circuit Breaker Finder, detailing features, safety warnings, operating instructions, and accessory usage for locating circuit breakers and testing wiring conditions.
	KAIWEETS VT200 Non-contact Voltage Tester Operation Manual Official operation manual for the KAIWEETS VT200 non-contact voltage tester, providing detailed instructions on usage, safety features, product overview, தொழில்நுட்ப விவரக்குறிப்புகள் மற்றும் பராமரிப்பு.
	VT200 Non-Contact Voltagஇ டிடெக்டர் பயனர் கையேடு User manual for the Kaiweets VT200 non-contact voltage detector, covering safety precautions, product overview, operation, battery replacement, and general specifications.
	KAIWEETS ST120 Smart Pen-type Multimeter Operation Manual This manual provides detailed instructions for operating the KAIWEETS ST120 Smart Pen-type Multimeter, including safety precautions, product overview, measurement functions, technical specifications, and maintenance procedures.

KAIWEETS HT100s-R, KT301T