Dyness 12V 100Ah Bluetooth LiFePO4 Battery User Manual

1. அறிமுகம்

This manual provides essential information for the safe and efficient use of your Dyness 12V 100Ah Bluetooth LiFePO4 Battery. This deep cycle lithium battery is designed for various applications including RV camping, home solar systems, and off-grid power solutions. Please read this manual thoroughly before installation and operation.

Image 1.1: Dyness 12V 100Ah Bluetooth LiFePO4 Battery

2. பாதுகாப்பு தகவல்

WARNING: RISK OF FIRE, EXPLOSION, or BURN.

• பேட்டரி டெர்மினல்களை ஷார்ட் சர்க்யூட் செய்யாதீர்கள்.
• Do not immerse the battery in water or expose it to excessive heat.
• பேட்டரியை பிரிக்கவோ, நசுக்கவோ அல்லது துளைக்கவோ வேண்டாம்.
• Use only compatible LiFePO4 chargers.
• சார்ஜ் மற்றும் டிஸ்சார்ஜ் செய்யும் போது சரியான காற்றோட்டத்தை உறுதி செய்யவும்.
• குழந்தைகளுக்கு எட்டாத இடத்தில் வைக்கவும்.

Always wear appropriate personal protective equipment (PPE) when handling batteries.

3. தயாரிப்பு முடிந்துவிட்டதுview

3.1 முக்கிய அம்சங்கள்

• Real-Time Monitoring via Bluetooth 5.0: மானிட்டர் தொகுதிtage, current, capacity, and system performance via the "Dyness" app within 10 meters.
• நீண்ட ஆயுட்காலம்: 4000+ deep cycles with A+ Grade LiFePO4 cells, offering up to 10 years of service life.
• ஒருங்கிணைந்த 100A BMS: Provides comprehensive protection against overcharging, over-discharging, over-current, overheating, and short circuits. Includes low-temperature cut-off protection.
• Expandable Energy Storage: Can be expanded up to 4S4P with 16 batteries, forming a 51.2V 400Ah power system (Max. 20.48kWh).
• இலகுரக மற்றும் கச்சிதமான: Significantly lighter and smaller than traditional lead-acid batteries.

Image 3.1: Real-time monitoring via Bluetooth 5.0

Image 3.2: Dyness Intelligent 100A BMS with 20+ protections

Image 3.3: Long-lasting A+ Grade Cells for durability

3.2 பெட்டியில் என்ன இருக்கிறது

• 1 x Dyness 12V 100Ah Bluetooth LiFePO4 Battery (Model AR1.2-BT)
• M8 Terminal Bolts
• பயனர் கையேடு

3.3 தயாரிப்பு வீடியோ முடிந்ததுview

Video 3.1: Dyness 12V 100Ah Group 31 Bluetooth Lithium Battery overview, demonstrating unboxing, M8 terminals, user manual, Bluetooth app connection, dimensions, waterproof test, and portability.

4 அமைவு

4.1 நிறுவல்

1. பேக்கிங்: Carefully remove the battery from its packaging. Inspect for any damage.
2. முனைய இணைப்பு: Connect your cables to the M8 terminals. Ensure connections are tight and secure to prevent arcing and overheating. The M8 terminals are standard for easy installation.
3. தொடர் மற்றும் இணை இணைப்புகள்: The Dyness 12.8V 100Ah battery can be connected in series (up to 4S) and parallel (up to 4P) for a maximum system of 51.2V 400Ah (20.48kWh). Consult the detailed wiring diagrams in the included user manual for specific configurations.
4. மவுண்டிங்: Secure the battery in a well-ventilated area, away from direct sunlight, heat sources, and flammable materials.

Image 4.1: Battery dimensions (12.99"W x 6.77"D x 8.43"H) and M8 terminal details.

4.2 ஆரம்ப சார்ஜிங்

It is recommended to fully charge the battery before its first use. Use a LiFePO4-specific charger. For optimal battery health, recharge at 0.2C (20A for a 100Ah battery).

5. இயக்க வழிமுறைகள்

5.1 புளூடூத் செயலி கண்காணிப்பு

The Dyness battery features Bluetooth 5.0 for real-time monitoring. Download the "Dyness" app from your smartphone's app store. Once installed, open the app and connect to your battery. The app allows you to monitor:

• தொகுதிtagஇ (வி)
• தற்போதைய (A)
• State of Charge (SOC %)
• திறன் (ஆ)
• வெப்பநிலை (°F/°C)
• Charge and Discharge State
• Alarm and Protection Status

Ensure your device is within 10 meters of the battery for a stable Bluetooth connection.

Image 5.1: Dyness App interface for monitoring battery status.

5.2 Low-Temperature Protection

The integrated Battery Management System (BMS) includes low-temperature protection:

• Charging automatically disconnects when the battery temperature drops below 32°F (0°C).
• Charging resumes when the temperature rises to 41°F (5°C).
• Power output automatically cuts off at -4°F (-20°C) to prevent cell damage.

Image 5.2: Battery operating in cold conditions with low-temperature protection.

6. பராமரிப்பு

• வழக்கமான ஆய்வு: Periodically check battery terminals for corrosion or loose connections. Clean as necessary.
• சேமிப்பு: If storing the battery for an extended period, ensure it is charged to approximately 50% State of Charge (SOC) and stored in a cool, dry place.
• சார்ஜ்: Always use a charger specifically designed for LiFePO4 batteries. Avoid overcharging or deep discharging to prolong battery life.
• சுத்தம்: Keep the battery casing clean and free of dust and debris. Use a dry cloth for cleaning.

7. சரிசெய்தல்

If you encounter issues with your Dyness LiFePO4 battery, consider the following:

• பேட்டரி சார்ஜ் ஆகவில்லை: Verify charger compatibility and connection. Check the battery temperature; charging is disabled below 32°F (0°C).
• பவர் அவுட்புட் இல்லை: Check all cable connections for tightness. Ensure the battery is sufficiently charged. The BMS may have activated a protection mode (e.g., low temperature, over-discharge). Refer to the Dyness app for protection status.
• புளூடூத் இணைப்புச் சிக்கல்கள்: Ensure your smartphone is within 10 meters of the battery. Restart the app and try reconnecting.
• அசாதாரண நடத்தை: If the battery exhibits unusual heat, smell, or sound, immediately disconnect it from all loads and charging sources and contact Dyness customer support.

For further assistance, utilize the diagnostic tools and help center within the Dyness app or contact customer support.

8. விவரக்குறிப்புகள்

9. உத்தரவாதம் மற்றும் ஆதரவு

Dyness provides professional technical support and online customer service with fast response within 24 hours. If you have any product-related issues or questions, do not hesitate to contact the Dyness support team directly.

This product may be eligible for additional protection plans. Please refer to your purchase documentation for details on available warranty and service options.