அறிமுகம்
This manual provides detailed instructions for the installation, operation, and maintenance of your RadioMaster AG02 CNC Hall Gimbal Set. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and longevity of your product. This gimbal set is designed for use with RadioMaster TX16 and TX15 Boxer series transmitters.
தயாரிப்பு முடிந்துவிட்டதுview
The RadioMaster AG02 CNC Hall Gimbal Set offers enhanced precision and durability for your remote control transmitter. Featuring advanced non-contact Hall effect sensors, these gimbals provide consistent performance without physical wear.
முக்கிய அம்சங்கள்:
- Precision CNC Machined: Constructed with CNC machining for superior durability, smooth operation, and accurate control input.
- Universal Hall Effect Sensors: Equipped with advanced non-contact Hall effect sensors, eliminating physical wear and ensuring consistent performance and extended lifespan.
- Smooth Throttle Function: Includes a dedicated throttle control with smooth sliding action, ideal for managing engine power and other variable functions.
- Reliable Self-Centering: The main control stick features a dependable self-centering mechanism, consistently returning to the neutral position for precise control.
- Enhanced Control Feel: Offers adjustable tension and feel, allowing users to customize gimbal resistance to their personal preference.
தொகுப்பு உள்ளடக்கம்:
- AG02 CNC Hall Sensor Gimbal (1 set)
- High-tension Springs (2 pieces)
- GH1.25-SH1.25 Adapter Board (for Boxer/TX16sMKII) (1 piece)
- PB2.3 * 10 Mounting Screws (4 pieces)
- Hex Wrench (1 piece)
- பயனர் கையேடு (1 துண்டு)
Image: The RadioMaster AG02 CNC Hall Gimbal Set, shown with all included accessories: the gimbal unit, high-tension springs, adapter board, mounting screws, and hex wrench.
அமைவு மற்றும் நிறுவல்
This section guides you through the process of installing the AG02 gimbals into your compatible RadioMaster TX16 or TX15 Boxer transmitter. Ensure your transmitter is powered off and disconnected from any power source before beginning.
- டிரான்ஸ்மிட்டரை தயார் செய்யவும்: Power off your RadioMaster TX16 or TX15 Boxer transmitter. Carefully open the transmitter casing according to its specific service manual or instructions.
- Remove Existing Gimbals: Disconnect the wiring from the existing gimbals and unscrew them from the transmitter chassis. Retain any screws or small parts that may be needed for reassembly.
- Install AG02 Gimbals: Position the new AG02 CNC Hall Gimbals in the designated slots. Secure them using the provided PB2.3 * 10 mounting screws and the hex wrench.
- வயரிங் இணைக்க: Connect the gimbal wiring to the transmitter's main board. Use the GH1.25-SH1.25 adapter board if required for your specific transmitter model (Boxer/TX16sMKII). Ensure all connections are firm and correctly oriented.
படம்: ஒரு உள் view of the gimbal, highlighting the wiring connections to the circuit board. Ensure proper connection during installation.
- Adjust Spring Tension (Optional): The AG02 gimbals allow for adjustable spring tension. Use the hex wrench to adjust the spring tension to your preferred feel. You may also replace the pre-installed springs with the included high-tension springs if a firmer feel is desired.
- Close Transmitter: Carefully reassemble the transmitter casing, ensuring no wires are pinched and all screws are securely fastened.
- அளவுத்திருத்தம்: After installation, it is crucial to calibrate the new gimbals within your transmitter's firmware settings. Refer to your transmitter's user manual for specific calibration procedures. This ensures accurate recognition of stick movements.
படம்: மேலிருந்து கீழ் நோக்கி view illustrating two gimbal units. One shows the self-centering mechanism, while the other displays the smooth throttle slide mechanism, indicating the different functionalities.
இயக்க வழிமுறைகள்
Once installed and calibrated, the AG02 gimbals operate similarly to standard gimbals but with enhanced precision and feel due to their Hall effect sensors and CNC construction.
- Stick Movement: The gimbals control the X and Y axes of your aircraft or vehicle. Move the sticks smoothly to achieve desired control inputs.
- த்ரோட்டில் கட்டுப்பாடு: The throttle stick provides linear control for power. Its smooth action allows for fine adjustments.
- Self-Centering: The self-centering stick will automatically return to its neutral position when released, providing consistent control for pitch and roll.
- Adjustable Feel: If you adjusted the spring tension during installation, you will experience the customized resistance. Further adjustments can be made as described in the Setup section.
படம்: ஒரு நெருக்கமான படம் view of the gimbal stick end, showcasinஅதுதான் தெரியும்urled texture for improved grip and tactile feedback during operation.
பராமரிப்பு
The AG02 CNC Hall Gimbals are designed for high durability and minimal maintenance due to their non-contact Hall effect sensors. However, regular inspection and basic care will ensure optimal performance.
- சுத்தம்: Periodically wipe the gimbal sticks and visible surfaces with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
- ஆய்வு: Regularly inspect the gimbals for any signs of physical damage, loose screws, or unusual movement. Ensure the wiring connections remain secure.
- மாசுபடுத்திகளைத் தவிர்க்கவும்: Keep the transmitter and gimbals away from excessive moisture, dirt, and extreme temperatures, which can affect electronic components.
- லூப்ரிகேஷன் தேவையில்லை: Due to the non-contact Hall effect sensors, these gimbals do not require lubrication. Applying lubricants may attract dust and potentially interfere with sensor operation.
சரிசெய்தல்
If you encounter issues with your AG02 CNC Hall Gimbal Set, refer to the following common problems and solutions:
| பிரச்சனை | சாத்தியமான காரணம் | தீர்வு |
|---|---|---|
| Gimbal not responding or erratic movement. | Incorrect or loose wiring connection. Improper calibration. | Check all wiring connections to ensure they are secure. Perform a full gimbal calibration through your transmitter's firmware settings. |
| Stick does not return to center. | Spring tension too low. Mechanical obstruction. | Increase spring tension using the hex wrench. Inspect for any physical obstructions preventing the stick from centering. |
| Rough or sticky stick movement. | Debris or foreign objects in the gimbal mechanism. | Carefully inspect the gimbal mechanism for any visible debris. Clean with a soft, dry brush or compressed air. Do not lubricate. |
If the problem persists after attempting these solutions, please contact RadioMaster customer support or your retailer for further assistance.
விவரக்குறிப்புகள்
| அம்சம் | விவரம் |
|---|---|
| சென்சார் வகை | Hall Analog |
| இயக்க தொகுதிtage | DC 3.3V |
| X-axis Travel Range | 30° ~ 56° |
| Y-axis Travel Range | 38° ~ 54° |
| Throttle Mode Switch (Mode 1/2) | Supported (no disassembly required) |
| Adjustable Spring Tension | Supported (without disassembly) |
| Quad Ball Bearings | ஆம் |
| இயக்க வெப்பநிலை வரம்பு | -20°C ~ +85°C |
| Dimensions (excluding stick end) | 53 × 53 × 33.3 மிமீ |
| எடை (ஒரு யூனிட்டுக்கு) | 73 கிராம் ± 1 கிராம் |
| Gimbal Stick Thread | M4 |
படம்: ஒரு பக்கம் view of the RadioMaster AG02 gimbal, illustrating its compact dimensions and robust construction.
உத்தரவாதம் மற்றும் ஆதரவு
For warranty information, technical support, or service inquiries, please contact your original point of purchase or visit the official RadioMaster webஉத்தரவாதக் கோரிக்கைகளுக்கு உங்கள் வாங்கியதற்கான ஆதாரத்தை வைத்திருங்கள்.
