Ouster manufactures high-resolution digital lidar sensors and perception software for autonomous vehicles, robotics, and smart infrastructure.
Ouster is a leading innovator in high-resolution digital lidar sensors and perception software, empowering autonomy across the automotive, industrial, robotics, and smart infrastructure sectors. By leveraging a unique digital architecture based on custom silicon, Ouster delivers high-performance sensors—such as the OS0, OS1, and OS2 series—that offer superior reliability and affordability compared to legacy analog solutions.
These sensors are integral to applications ranging from 3D mapping and crowd analytics to last-mile delivery and autonomous driving.
சமீபத்திய கையேடுகள் manuals+ இந்த பிராண்டிற்காக வடிவமைக்கப்பட்டது.
இந்த பிராண்டிற்கான அமைப்பு, நிறுவல் மற்றும் சரிசெய்தல் வீடியோக்களைப் பாருங்கள்.
இந்த பிராண்டிற்கான கையேடுகள், பதிவு மற்றும் ஆதரவு பற்றிய பொதுவான கேள்விகள்.
Use 99% isopropyl alcohol with a clean microfiber towel to wipe away debris, followed by warm, mild-soapy water. Rinse with clean water and dry with a microfiber towel. Do not use acetone.
No, Ouster sensors (e.g., OS0, OS1, OS2) are hermetically sealed units. Opening the housing or attempting repairs can expose the user to hazardous laser radiation and will void the warranty.
Ouster sensors typically operate at 12V and 24V nominal input voltagஇ. ஒரு குறைந்த தொகுதிtage warning triggers below 9.5V, and the sensor will shut down if the voltage 9V ஆக குறைகிறது.
பதிவிறக்கம் செய்யக்கூடிய CAD files for sensors like the OS0, OS1, and OS2 are available on the Ouster website under the product details or resources section.
The boot-up sequence takes approximately 60 seconds, after which the optics begin spinning, the laser activates, and the unit starts operating in its default mode.