Leading European manufacturer of high-precision sensor technology and control devices for HVAC, building automation, and mechanical engineering.
எஸ்+எஸ் ரீஜெல்டெக்னிக் is a premier European manufacturer specializing in advanced sensor technology for measurement, control, and regulation tasks in building automation and mechanical engineering. Headquartered in Nuremberg, Germany, the company is known for its holistic approach to precision engineering, delivering a wide range of sensors for temperature, humidity, pressure, air quality, and light intensity. Their portfolio includes the intelligent RYMASKON® room controllers and innovative W-Modbus wireless solutions, designed to simplify installation and enhance energy efficiency in modern facilities.
With a commitment to quality 'Made in Germany,' S+S Regeltechnik provides calibratable measuring transducers and robust control units that integrate seamlessly into existing building management systems. Their products support standard protocols like Modbus and offer flexible configuration options, ensuring reliable operation for complex HVAC applications, industrial monitoring, and facility management.
சமீபத்திய கையேடுகள் manuals+ இந்த பிராண்டிற்காக வடிவமைக்கப்பட்டது.
இந்த பிராண்டிற்கான அமைப்பு, நிறுவல் மற்றும் சரிசெய்தல் வீடியோக்களைப் பாருங்கள்.
இந்த பிராண்டிற்கான கையேடுகள், பதிவு மற்றும் ஆதரவு பற்றிய பொதுவான கேள்விகள்.
W-Modbus is a wireless Modbus RTU architecture operating on the 2.4 GHz ISM band. It features frequency hopping for interference resistance and allows up to 100 nodes to communicate via a single gateway over distances up to 500 meters (open field) without data cables.
Many S+S sensors are calibratable. Manual offset adjustment is often possible via a potentiometer on the circuit board (e.g., ±50 hPa for pressure sensors) or through Modbus register settings, depending on the specific device model.
Configuration tools for RYMASKON products are typically available for download on the official S+S Regeltechnik website. These tools allow for easy connection via USB to adjust firmware, Modbus registers, and time programs.
For many S+S gateways, the factory default bus parameters are often set to 19200 baud, 8E1 (Even Parity, 1 Stop Bit), with bus termination deactivated. Always verify with the specific device datasheet.
Most devices accept 24 V AC or 15-36 V DC. However, specifics vary by model (e.g., controllers may accept 100-240 V), so checking the technical data on the device label is essential before connection.