3வது பிரேக் ஃப்ளாஷர் டிகாய் டைமர் வழிமுறைகள்
The decoy timer can be connected to any 3V to 12V motorized decoy to add more realistic, lifelike motion. It is configured with up to 100 ON/OFF time points. A single button is used for setup. Reprogram the timer as needed to match the hunting environment and decoy better
For up to date installation instructions and videos visit http://doc2.us
Watch YouTube video: https://youtu.be/g8LhkRTKIGI\
Please read the entire manual before connecting and configuring Decoy Timer.
Connect the decoy timer according to the diagram.
To configure the timer:
- Connect the WHITE and GREEN wires together (or press the button connected to the WHITE and GREEN wires), then turn on power to the timer. The decoy will move briefly. Disconnect the WHITE and GREEN wires or release the button as soon as you see the decoy move. If the decoy moves again, disconnect the power and try again.
- Push and release the configuration button (or short WHITE and GREEN wires together) as needed for the decoy to operate. For example, if you want the decoy to run with a 3-second ON, 6-second OFF, 1-second ON, and 10-second OFF cycle: press the button for 3 seconds, release and wait 6 seconds, press again for 1 second, then release for 10 seconds, and finally press the button once more before disconnecting power.
ஆவணங்கள் / ஆதாரங்கள்
 |
Decoy Timer 3rd Brake Flasher Decoy Timer [pdf] வழிமுறைகள் 3rd Brake Flasher Decoy Timer, 3rd, Brake Flasher Decoy Timer, Flasher Decoy Timer, Decoy Timer, Timer |