COMICA BoomX-U Qua UHF வயர்லெஸ் லாவலியர் மைக்ரோஃபோன் சிஸ்டம் பயனர் கையேடு

1. அறிமுகம்

The COMICA BoomX-U Qua is a professional UHF wireless lavalier microphone system designed for high-quality audio recording. This system features four transmitters and one receiver, making it suitable for multi-person interviews, filming, live streaming, and other professional audio applications. It offers stable signal transmission, versatile compatibility, and convenient monitoring capabilities.

2. தொகுப்பு உள்ளடக்கங்கள்

கீழே பட்டியலிடப்பட்டுள்ள அனைத்து பொருட்களும் உங்கள் தொகுப்பில் சேர்க்கப்பட்டுள்ளதா என்பதை சரிபார்க்கவும்:

• 1 x பெறுநர்
• 4 x டிரான்ஸ்மிட்டர்கள்
• 4 x Lav Mic
• 4 x Wind Muff
• 1 x 3-in-1 USB-C Charging Cable
• 1 x 3.5mm TRS-Dual XLR Cable
• 1 x 3.5mm TRS Cable
• XXx கேரி கேஸ்

Image 2.1: All components of the COMICA BoomX-U Qua system.

படம் 2.2: விரிவானது view of the included accessories and main units.

3. தயாரிப்பு முடிந்துவிட்டதுview

The BoomX-U Qua system consists of a receiver and four transmitters, each equipped with a built-in microphone and an input for an external lavalier microphone.

3.1 டிரான்ஸ்மிட்டர் (TX)

• உள்ளமைக்கப்பட்ட மைக்ரோஃபோன்: For direct audio capture.
• External Lavalier Microphone Input: Connect the included lavalier microphone for discreet placement.
• ஆற்றல்/இணைத்தல் பொத்தான்: Controls power and initiates pairing.
• நிலை காட்டி: Displays power, pairing, and battery status.

3.2 பெறுநர் (RX)

• காட்சி திரை: Shows channel status, audio levels, battery, and mixing mode.
• கட்டுப்பாட்டு பொத்தான்கள்: For menu navigation, channel selection, and volume adjustment.
• 180° Foldable Antenna: Enhances signal stability and range.
• ஆடியோ அவுட்புட் போர்ட்கள்: 3.5mm TRS/TRRS and XLR outputs for various devices.
• Headphone Monitoring Port: நிகழ்நேர ஆடியோ கண்காணிப்புக்கு.

Image 3.1: Demonstrates the use of the external lavalier microphone versus the transmitter's built-in microphone.

4. அமைவு வழிகாட்டி

4.1 பவர் ஆன்/ஆஃப்

1. To power on, press and hold the power button on both the transmitter(s) and receiver until the display or indicator light activates.
2. பவர் ஆஃப் செய்ய, சாதனம் மூடப்படும் வரை பவர் பட்டனை அழுத்திப் பிடிக்கவும்.

4.2 பதிவு சாதனங்களுடன் இணைத்தல்

The BoomX-U Qua offers wide compatibility with various recording devices:

• DSLR Cameras/Camcorders: Use the 3.5mm TRS cable for connection.
• ஸ்மார்ட்போன்கள்: Use the 3.5mm TRRS cable. (Note: For iPhones without a 3.5mm jack, an official Lightning to 3.5mm adapter is required. For some Android phones, a USB-C to 3.5mm adapter may be needed.)
• Audio Mixers/Professional Equipment: Use the 3.5mm TRS-Dual XLR cable for balanced audio input.

Image 4.1: Illustrates various connection types and compatible devices including cameras, camcorders, recorders, and smartphones.

4.3 Pairing Transmitters and Receiver

The system supports both auto-scanning and manual channel setting for pairing.

• Auto-scanning: This feature automatically finds and assigns the best available channel, ideal for quick setup in most scenarios. Refer to the receiver's menu for auto-scan options.
• Manual Channel-setting: Allows you to manually select specific channels for each transmitter. This is useful in environments with potential interference or when precise channel management is required.

Image 4.2: Shows the auto-scanning and manual channel setting interface on the receiver.

5. இயக்க வழிமுறைகள்

5.1 Audio Mixing Modes

The receiver offers flexible audio output options:

• Mixed Output (MIX ALL): All four audio tracks from the transmitters are combined into a single output track. This is suitable for scenarios where a single, combined audio feed is desired.
• Individual Output (MIX None): Each of the four audio tracks is output independently. This allows for greater control during post-production, enabling individual adjustment of each microphone's audio.

Image 5.1: Receiver display showing the 'MIX ALL' mode, combining all four channels.

Image 5.2: Receiver display showing 'MIX None' mode, providing independent audio tracks.

5.2 Real-Time Audio Monitoring

Connect headphones to the receiver's 3.5mm monitoring port to listen to the audio in real-time during recording. This allows for immediate detection and adjustment of any audio issues.

Image 5.3: Diagram illustrating real-time monitoring connection to the receiver.

6. சார்ஜிங் மற்றும் பேட்டரி ஆயுள்

The BoomX-U Qua system is powered by rechargeable Lithium Polymer batteries. The transmitters have a 700mAh battery, and the receiver has a 1400mAh battery, providing up to 6.5 hours of working time.

• சார்ஜ்: Use the included 3-in-1 USB-C charging cable to charge all units simultaneously. Connect the USB-C end to the charging ports on the transmitters and receiver, and the USB-A end to a compatible USB power adapter (not included).
• பயன்பாட்டில் இருக்கும்போது சார்ஜ்: The system supports charging while operating, ensuring uninterrupted recording sessions.

Image 6.1: Illustrates the charging process for the transmitters and receiver using the 3-in-1 USB-C cable.

7. பராமரிப்பு

• Keep the devices dry. Do not expose them to rain or moisture.
• நேரடி சூரிய ஒளி மற்றும் தீவிர வெப்பநிலையிலிருந்து விலகி குளிர்ந்த, உலர்ந்த இடத்தில் சேமிக்கவும்.
• Clean the units with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Ensure the antennas are not bent or damaged during transport or storage.
• Regularly check cables for wear and tear.

8. சரிசெய்தல்

If you encounter issues with your BoomX-U Qua system, refer to the following common problems and solutions:

9. விவரக்குறிப்புகள்

Key technical specifications for the COMICA BoomX-U Qua system:

10. உத்தரவாதம் மற்றும் ஆதரவு

COMICA products typically come with a standard manufacturer's warranty. For specific warranty details, registration, or technical support, please refer to the warranty card included in your package or visit the official COMICA webஉத்தரவாதக் கோரிக்கைகளுக்கான வாங்கியதற்கான சான்றாக உங்கள் கொள்முதல் ரசீதை வைத்திருங்கள்.